View Full Version : KIA SORENTO - PIN from VIN
liloM
8th May, 2012, 08:26 PM
i need pin from vin
please help
Kia Sorento 2,5 CRDI 2007/2008
KNEJC524885839160
wasiltwd
8th May, 2012, 09:06 PM
i need pin from vin
please help
Kia Sorento 2,5 CRDI 2007/2008
KNEJC524885839160
new312630 old115088
liloM
8th May, 2012, 09:31 PM
for what is the pin new and pin old?
with one i should use to program keys?
wasiltwd
9th May, 2012, 06:56 AM
for what is the pin new and pin old?
with one i should use to program keys?
Try-depending on the model year cars. You must be new.
liloM
9th May, 2012, 08:24 AM
i try with lunch and i can make clean key (neutral mode) with new pin, but i can't programing key. procedure is not succeed.
flurthi
9th May, 2012, 09:08 AM
cod 734970
flurthi
9th May, 2012, 09:11 AM
sorry this cod 734960
liloM
9th May, 2012, 09:37 AM
this same effect
in programing key: first show 1key prog. complete and then shows 'test failure'.
in all pins.
liloM
9th May, 2012, 01:17 PM
i don't know what i'm doing wrong?
1. this is original file ecu - restore from flooded ecu
120498
ecu lamp don't light - car don't start and haven't communication with ecu
2. this is file i finded in dk
120499
ecu lamp light - car don't start and have communication
3. this is file from another ecu no. 0 281 014 291 - hyundai.
120500
when i write to this ecu eeprom from car, starts but have errors and the gas pedal don't work.
-----
4. and when i write eeprom 1 (from car) to ecu file 2 (file from dk). car don't start. launch diagun x-431 show me in immo: ecu is learned and key status - unknown.
in this case in programming keys pin 312630 is ok but i can't program key.
5. in case 3. launch diagun x-431 show me in immo: ecu is learned and key status - learned.
liloM
9th May, 2012, 04:27 PM
i discover something else: the pin code is in line 0x050 bit 06-08 : 312630.
line 0x050: 02 01 23 45 01 00(31 26 30)FF FF FF FF FF FF 00
and repeat in line 0x090 bit 06-08.
thanks wasiltwd - you have the right.
becouse in this ecu: 0 281 014 291 - hyundai i put to eeprom in line 0x040 - 0x0B0 lines eeprom from car and engine start.
launch diagun can also program key with pin 312630.
however in ecu: 0 281 013 048 - soft from dk, it not work.
liloM
9th May, 2012, 05:51 PM
i think that soft does not fit with my ecu:
http://www.digital-kaos.co.uk/forums/f175/kia-sorento-edc16-ecu-dump-260890/
can someone have soft on this no. 0 281 013 048 - full bdm readed?
wasiltwd
9th May, 2012, 08:41 PM
i think that soft does not fit with my ecu:
http://www.digital-kaos.co.uk/forums/f175/kia-sorento-edc16-ecu-dump-260890/
can someone have soft on this no. 0 281 013 048 - full bdm readed?
Give the address of the mailbox
liloM
10th May, 2012, 05:55 PM
m8 i need this dump
please help :)
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.