PDA

View Full Version : seat ibiza pin code



technobox
10th May, 2012, 01:04 PM
hi i need this car pin code
and any one know where stored in hex
thnks
i want to swap dashboard

ammarben
10th May, 2012, 01:12 PM
pin code 7239

haroutioun
10th May, 2012, 02:04 PM
hi i need this car pin code
and any one know where stored in hex
thnks
i want to swap dashboard
Hi,
your result in the photo.

technobox
10th May, 2012, 02:45 PM
i attached other dump but this dump cyrpto and how to change pin code i want use this dashboard
thnks

emanuel2010
10th May, 2012, 02:51 PM
dash is vdo-93c86?

haroutioun
10th May, 2012, 02:56 PM
i attached other dump but this dump cyrpto and how to change pin code i want use this dashboard
thnks
Hello.
try load this dump & give us the result...

technobox
10th May, 2012, 03:15 PM
mate if i send this dump i need adaptation dash board

haroutioun
10th May, 2012, 03:44 PM
mate if i send this dump i need adaptation dash board
yes you must adapt.

technobox
10th May, 2012, 03:45 PM
ur dump ok but now immo light flashing and car not start

technobox
10th May, 2012, 03:45 PM
how to adaptation

technobox
10th May, 2012, 04:27 PM
i try mate but 7239 not accept coding why

technobox
10th May, 2012, 05:49 PM
i write new key and cluster than now give error
ecu control unit

technobox
10th May, 2012, 05:51 PM
if i send ecu file some one put new p***305;n ecu

haroutioun
10th May, 2012, 07:07 PM
i try mate but 7239 not accept coding why
mate the dump which i load it in DK, the pin is 02308 NOT 07239.use this link to adapt. Immobilizer III Immobilizer Swapping (Instrument Cluster) - Ross-Tech Wiki (http://wiki.ross-tech.com/wiki/index.php/Immobilizer_III_Immobilizer_Swapping_%28Instrument _Cluster%29)

iulianp
30th December, 2015, 11:09 AM
Hi! I tried to read pin code to an IBIZA 1.2 2006 IC Kombi+Wegfahrs AGD V07 but no success with VAG K+CAN Commander 3.6 and VAG Tacho 5.0. IC has MC9S12H256 processor with EEPROM inside and a cannot read it. Any idea how to read pin code? I need a second key.

P.S. A scanned for errors deleted all of them but one error cannot be deleted: 01179 - Incorrect Key Programming
35-00 - - in module 17 instruments.

potatodog
30th December, 2015, 05:04 PM
Read eeprom from ECU

iulianp
31st December, 2015, 09:32 AM
I tried VAG Tacho 5.0 all types of ECU. The best result is Audi A4/A6/A8 VW Immo Box (Megamos/Kostal). It says "Bitte Adresse 17 eingeben Go Ahead! Then tries to read Immobilizer pin code ... Unknown immo box. The other ECUs say directly Unknown Immo Box. On the ECU label it is written SIEMENS.

potatodog
31st December, 2015, 10:27 AM
Read epprom ECU with programmer

iulianp
15th January, 2016, 08:27 PM
Hello! Finally I got a programmer and I managed to read 93C76 eeprom and I don't know what addresses pin code is located.

potatodog
16th January, 2016, 08:42 AM
Pincode 08640

iulianp
16th January, 2016, 07:13 PM
Thanks a lot! I don't know what the rule is but I supposed R! too. I will try it when the weather is getting better.

bbooth1991
3rd November, 2019, 12:43 PM
could anyone work out my pin code from dump for seat Ibiza 2007. O have the ecu epromm

brend
3rd November, 2019, 03:59 PM
https://www.digital-kaos.co.uk/forums/showthread.php/783834-PIN-HELP-PLEASE!!!!!




could anyone work out my pin code from dump for seat Ibiza 2007. O have the ecu epromm