A4 1,6 1998 immo

[sepistar]

hi,guys
please i need this dump immo off because dash swapped and no login key.
3B0 907 557 E
SIEMENS
5WP4 361 01
thanks.
best regards

[sepistar]

no solutiom for this ecu?
best regards

[sepistar]

have give a try with immodecoder 2.0 but as expected it fails.can you guys make this off,or a hint how can be done?
best regards

[sepistar]

c'mmon guys,nobody has solution for his ecu?
best regards

[sepistar]

how to find out immo pin from this ecu,maybe i can adapt the new(used) dash to ecu.
best regards

[sepistar]

here is the dump.
best regrards.

[sepistar]

nobody knows anything about this ecu??
best regards

[Meat-Head]

c'mmon guys,nobody has solution for his ecu?
best regards

Well, i'm *DESPRATE* for an answer here http://www.digital-kaos.co.uk/forums/f152/peugeot-206-speedo-not-working-everything-else-works-114834/index2.html

Perhaps if you look for last august some Polish **** EVENTUALLY helped me out with a simular thread, but can't find it.

have a look

[Meat-Head]

Stick this in your pipe and smoke it - then you can find out whats up with the speedo job we have in

http://www.digital-kaos.co.uk/forums/f178/passat-1-6-ecu-siemens-immo-off-214332/index2.html#post1268008

[sepistar]

well,thanks m8 but unfortunately not work.must waiting for a good solution.
best regards

[Meat-Head]

oh, that worked for me, what does your diagnostic say?

[sepistar]

orig.dash broked,swapped with the new one(used) have no pin for and normally car not started(immo on)
best regards

[xoom]

use vag tacho to get pin.

[sepistar]

allready happened,no luck.dash are from 2,5 tdi year 1999.also with kkl interface and vag commander but i can't get pin from.
best regards

[gejzaslapka]

"new" dash is exactly the same as the old one?

GS

[sepistar]

nope.ori one 1998 gasoline,new one 1999 diesel.
best regards

[sepistar]

all day hsve edited eeprom but no succes,i've manage to get started but only once!second time only is the ecu disconected for few seconds.now i put new eeprom im willem once again, writed and at last worked!with the dump founded on dk.no idea whay happens first time,but not worked.maybe not write correct,there was a mistake from me that i have not checked after write,anyway all the things are good then it works!
thanks all
best regards

[sepistar]

guys,until today car it has worked,but wont anymoore.93c56 desoldered hex compare with the one i earlier wrote,and came out a lot diferences.
question are,why its modify and must the immo line cut off?wich were the immo line?
best regards

[sepistar]

here the hex compare.
best regards

[sepistar]

nobody?
best regards

[sogaro]

Why dont you write back what worked and remove immobox from car if that helps?

[sepistar]

It has no immobox,immo in dash,uknsi.
best regards

[sepistar]

moore ideas,please,
best regards

[sogaro]

Post the dump of the new dash you have and lets see if the pin can be gotten for you, do you have the old dash or its missing?

[sepistar]

sorted,i have pin extracted and the key match,also with the ecu.hope that this time is forever.
btw.what you think that has write data in eeprom,dash or the keys?
best regards