PDA

View Full Version : Golf 4 Siemens5WP4441



treo
12th May, 2012, 04:51 PM
Hi
I need a immo off for this Ecu 5WP4441 from Siemens,inside is 93c56 and 29f200.

bearheroes
12th May, 2012, 06:06 PM
how many plugs?post dumps

treo
12th May, 2012, 06:40 PM
how many plugs?post dumps
2 plugs,dump from eeprom or flash?

lupu_sandu
12th May, 2012, 07:34 PM
Post flash

treo
13th May, 2012, 11:48 AM
Post flash
Here is the dump:

lupu_sandu
13th May, 2012, 01:07 PM
And where is flash?
Your file have 4kb, flash must have 256kb

treo
13th May, 2012, 01:46 PM
Sorry
I posted by mystake dump from 93c56.
Now is ok.

lupu_sandu
13th May, 2012, 02:02 PM
.................................................. ..

treo
13th May, 2012, 02:19 PM
Your file off (pass in pm):
Hi Lupu
Your dump is the same with mine made with Otocheck wich dont work.
Please send me onother one if you have.

cfgebel
13th May, 2012, 02:52 PM
Here is the dump:

your file off

pass .......................... pm

lupu_sandu
13th May, 2012, 03:48 PM
Hi treo, check again my file.
2 immo zones was cleared, also check-sum is corrected.
My immo solution is well tested.

treo
13th May, 2012, 06:39 PM
I allready tried with a dump like yours, not working.

lupu_sandu
13th May, 2012, 06:51 PM
So, you don't try with my dump.
Be kind and post here your dump that you try from otocheck.

treo
13th May, 2012, 07:11 PM
This is the dump Off with Otocheck.I have this cleaner from Emin, is original,I pay for it.

lupu_sandu
13th May, 2012, 08:32 PM
So, in this case you have another problem with car.

Meat-Head
13th May, 2012, 08:34 PM
So, in this case you have another problem with car.

You heard that first hand.

As far as the entire world, Lupu_SAndu has only failed ONCE to immo off a car (one i needed).

So go check your cranck sensor.

treo
14th May, 2012, 06:00 AM
You heard that first hand.

As far as the entire world, Lupu_SAndu has only failed ONCE to immo off a car (one i needed).

So go check your cranck sensor.
The sensor is ok.
Engine start for 2 sec then stop.

treo
16th May, 2012, 02:11 PM
Today I start the car with another ECU from Audi A4 1.6 siemens 5wp4333 and I make immo off in eeprom.
Thanks to all for help.

Meat-Head
16th May, 2012, 02:23 PM
so that sounds like your orginal ecu is faulty.

Did the engine light go off?

treo
16th May, 2012, 03:09 PM
so that sounds like your orginal ecu is faulty.

Did the engine light go off?
Maybe, but he behaves like immo was active.
This car dont have light for engine.
Finaly engine run ok,everyone is happy:beer: