PDA

View Full Version : opel meriva b 2011



tatop
12th May, 2012, 09:30 PM
how modify km in opel meriva b 2011?
eeprom in dash 95080. . . algo for this odo?
bcu?
:manuscarf:

ALEXEI
12th May, 2012, 10:51 PM
km only in bcu

Rito
13th May, 2012, 03:05 AM
Mileage is only in BCU..
You must remove BCU, it?s under radio side passenger..

tatop
13th May, 2012, 05:15 AM
km only in bcu


Mileage is only in BCU..
You must remove BCU, it?s under radio side passenger..

Bcu have eeprom or micro?

honingkoning
13th May, 2012, 03:28 PM
Bcu have eeprom or micro?

as i remember a post on dk there is a nec cpu in the bcu.

regards.

tatop
13th May, 2012, 05:32 PM
yes , i read in dk the bcu inside mcu NEC
how read this nec???
algo for nec??

smartymarti
13th May, 2012, 08:34 PM
I'd have thought it was same as new Astra bcu with epeom

tatop
13th May, 2012, 09:01 PM
I'd have thought it was same as new Astra bcu with epeom

tanks smarty.marty tomorrow take bcu and post pic here

smartymarti
13th May, 2012, 09:56 PM
Going on past models there virtually the same as the Astra so it should have a EPROM however they won't go by obd as the new ones don't , still when doing remember to disconnect battery before starting strip out

tatop
13th May, 2012, 10:07 PM
Going on past models there virtually the same as the Astra so it should have a EPROM however they won't go by obd as the new ones don't , still when doing remember to disconnect battery before starting strip out

tomorrow i post here dump
tanks

Rito
13th May, 2012, 11:37 PM
Have epron 95160 or 95080...
Disconnect battery before to do job..

tatop
14th May, 2012, 11:15 AM
post pic of odo with 95080 eeprom
after post pics of bcm

Rito
14th May, 2012, 11:47 AM
you must read this epron and check if have stored km..
But BCU is need to do...

ALEXEI
14th May, 2012, 12:23 PM
wasted time to strip out the dash.
only bcu and engine ecu store km on this cars.

tatop
14th May, 2012, 01:52 PM
wasted time to strip out the dash.
only bcu and engine ecu store km on this cars.

this are the pics of bcm. .
where is the eeprom?

martin292009
14th May, 2012, 01:58 PM
Post Dump DAsh... and Km...

tatop
14th May, 2012, 02:25 PM
Post Dump DAsh... and Km...

here dump 95080 eeprom odo with km 38123
insert 18100

PremierD
14th May, 2012, 02:36 PM
Do none of you people know what a .bin file is !!!!!!!!!!!

cunny
14th May, 2012, 02:45 PM
Do none of you people know what a .bin file is !!!!!!!!!!!

Aint it similar to the recycle bin?

Sent from my GT-I9100 using Tapatalk

PremierD
14th May, 2012, 02:48 PM
lol lol lol

PremierD
14th May, 2012, 02:49 PM
Or Bin them as in can an ass or two ?

PremierD
14th May, 2012, 02:51 PM
Going to get a queue of people now saying .. but you can convert it to .bin .. or theres no need .. I can read it .. all that kind of sh1t ..lol

But I don't care .. think I'll put up a sticky .. .bin files .. or No files please ..

tatop
14th May, 2012, 03:53 PM
Going to get a queue of people now saying .. but you can convert it to .bin .. or theres no need .. I can read it .. all that kind of sh1t ..lol

But I don't care .. think I'll put up a sticky .. .bin files .. or No files please ..

I'm sorry but I did not understand. . can't i post here the bin file? what format are then posted on the forum?

ALEXEI
14th May, 2012, 04:44 PM
can you see nec mcu on bcu pcb ?

TULGEYWOODMAN
14th May, 2012, 08:57 PM
why waste time looking at dump in dash eeprom when it is controlled by bcm?

tatop
14th May, 2012, 09:56 PM
why waste time looking at dump in dash eeprom when it is controlled by bcm?
post pics of bcm
i see only mcu nec singapore
sigh sigh

i examinaded eeprom 95080 odo and i found KM:
algo: KM*64 ---> HEX
A0: XX XX XX XX XX XX AA BB CC DD XX XX XX XX XX XX
D0: XX XX XX XX AA BB CC DD XX XX XX XX XX XX XX XX

HELP PLEASE

TULGEYWOODMAN
14th May, 2012, 10:04 PM
post pics of bcm
i see only mcu nec singapore
sigh sigh

i examinaded eeprom 95080 odo and i found KM:
algo: KM*64 ---> HEX
A0: XX XX XX XX XX XX AA BB CC DD XX XX XX XX XX XX
D0: XX XX XX XX AA BB CC DD XX XX XX XX XX XX XX XX

HELP PLEASE

yes, but the kms will be in the bcm and thats where they will have to be written to.



you could try changing the kms in the dash but chances are the original will return....

tatop
14th May, 2012, 10:16 PM
yes, but the kms will be in the bcm and thats where they will have to be written to.



you could try changing the kms in the dash but chances are the original will return....

see pics of bcm
how modify bcm????

TULGEYWOODMAN
14th May, 2012, 10:47 PM
see pics of bcm
how modify bcm????

answer is you cant!

wait for dp3 etc

tatop
15th May, 2012, 07:40 PM
answer is you cant!

wait for dp3 etc
tomorrow I feel the car, the odometer changes only, and let you know
well hopefully

TULGEYWOODMAN
15th May, 2012, 10:35 PM
tomorrow I feel the car, the odometer changes only, and let you know
well hopefully

Buona fortuna.........................

tatop
15th May, 2012, 11:31 PM
Buona fortuna.........................

:top: grazie. . . . . .

tatop
16th May, 2012, 09:28 AM
update. dont go
modify only odo show old km
f**k bcm
sigh sigh
:eviltongue:

ALEXEI
16th May, 2012, 09:23 PM
update. dont go
modify only odo show old km
f**k bcm
sigh sigh
:eviltongue:

3 pages of forum to arrive at this conclusion which was obvious from the beggining.

tatop
16th May, 2012, 10:53 PM
3 pages of forum to arrive at this conclusion which was obvious from the beggining.

yes 3 pages of forum, sigh sigh
uffaaaaa

dave11674
20th May, 2013, 11:49 AM
Any updates on the meriva B yet guys ???

dave

javyb
20th May, 2013, 01:11 PM
Apparently DP3 can do by OBD in there new update

redliner
23rd November, 2017, 03:12 PM
Hello guys can anyone tell me pin from speedo Meriva B please.
ok It's sorted now.
How to delete the rubbish post ? not possible. :dejection:

xyznia
23rd November, 2017, 09:22 PM
smok can do via obd this car

rola1971
24th November, 2017, 12:14 PM
smok can do via obd this car


yes smok i doit
i doit 3 cars
smok work 100%

audiobesst1111
21st April, 2019, 11:35 AM
I have MERIVE 2013 y. I want a mileage correction, I understand that you need to change only in BCM not in dash

marina_rv
22nd April, 2019, 04:10 PM
I have MERIVE 2013 y. I want a mileage correction, I understand that you need to change only in BCM not in dash

read BCM eeprom or NEC.

change by OBDII Abritus orig or X-Tool or other instrument.

audiobesst1111
28th April, 2019, 11:28 AM
I have X-Tool but is only Meriva B NEC v1 and NEC v2. Reads only VIN and communication error !