Can?t read motorola Mercedes key

[Rito]

I try read motorola mask G72G from mercedes key.
I put MCU in adapter from ecuvonix but not success whit UPA
Some help how to do??

[Rito]

Anyone had tried it??

[immo_key]

Mybe can help

http://www.digital-kaos.co.uk/forums/f178/upa-usb-reading-hc05e6-big-ir-key-196478/?highlight=benz

Regard

[eprommazza]

i have read/write more time this mcu with x prog m without problem

regards

[smayer]

Lift pin 1.

And try with mask 0F82B

Um abra

[mikeli]

UUpa reads it onboard...
No need to lift any pin...
And set osc to 2000Mhz.

Mikeli



I try read motorola mask G72G from mercedes key.
I put MCU in adapter from ecuvonix but not success whit UPA
Some help how to do??

[PierreTheron]

UUpa reads it onboard...
No need to lift any pin...
And set osc to 2000Mhz.

Mikeli

Yes .. Made my own adaptor with help posted here on Dk

And it reads this every time . Thanks to some great member that knows electronics..

BTW he posted pics and everything..
:D

[foxdata]

hi
omega programmer can do that
i read many moto mcu for mb old big key with it

[pinyoro]

I try read motorola mask G72G from mercedes key.
I put MCU in adapter from ecuvonix but not success whit UPA
Some help how to do??

I am not familiar with this adapter but did the Controller have a crystal connected to it?

[Mrpromega]

I try read motorola mask G72G from mercedes key.
I put MCU in adapter from ecuvonix but not success whit UPA
Some help how to do??

Hi

This MCU is Not G72 but 0F82B
Try to read it with Xprog M it reads it well, Change the oscillator to 4Mhz in Xprog

Becarful in writing u should have no fault, !!!!

[smayer]

Hi

This MCU is Not G72 but 0F82B
Try to read it with Xprog M it reads it well, Change the oscillator to 4Mhz in Xprog

Becarful in writing u should have no fault, !!!!

4mhz??? are you sure?

[mikeli]

U have Tango?
Is there module for generating this old MB keys from EZS?


Mikeli



hi
omega programmer can do that
i read many moto mcu for mb old big key with it

[igorr]

U have Tango?
Is there module for generating this old MB keys from EZS?


Mikeli
Tango dont have that option

[Rito]

I am not familiar with this adapter but did the Controller have a crystal connected to it?


Yes it have crystal 4mhz this is from ecuvonix..
Can?t read.....I try 0F82B mask but not sucess..

[smayer]

UUpa reads it onboard...
No need to lift any pin...
And set osc to 2000Mhz.

Mikeli
In this key pin 1 is connected to pin 27 (+5), if you can read without lifting the pin is a miracle.