PDA

View Full Version : ME7.5 checksum need - urgent



oep
14th May, 2012, 10:41 PM
Guys, can someone fix checksum ..
or good dump from 8E0909518AL

thanks in advance

k0mpresd
14th May, 2012, 10:53 PM
the chksums in that file are ok.

oep
14th May, 2012, 11:06 PM
I tried other different similar dumps and error does not show - but dump are not good for this ecu...
i need org one or fix this one..

k0mpresd
14th May, 2012, 11:11 PM
your dump does not 16985 dtc stored. not that i see.

oep
14th May, 2012, 11:29 PM
Impossible friend, i tried many similar construed dumps and the closet i got is having immo off and car running on 1200rpm on idle..

k0mpresd
14th May, 2012, 11:33 PM
the car should run ok on any immo3 dump with immo defeated just to test. did you try different 95040 dumps or did you flash different 29f800 dumps? it sounds like more you are flashing different tunes and not immo files. also possible you are flashing different immo files but your tune is bad.
did you look at the picture i posted and compared it with your 95040 read?

oep
14th May, 2012, 11:36 PM
Car was remaped before - and come to me with defect.
But even untouched ecus have this error.
I loaded stock flash same thing.
Tried other eeprom same thing.
Tried other dump - no error but not ok for good work.
As i said, closest i got is immo off + start ok but idle on 1200rpm on stock map.....

k0mpresd
14th May, 2012, 11:42 PM
eeprom has nothing to do with idle. i have used 1.8t eeprom on vr6 ecu before and car ran ok. sounds like flash/ecu problem.

oep
14th May, 2012, 11:48 PM
Car runs ok, only problem is death code written also on your picture. Even revo lemiwinks manipulate idle offset, which acctualy mod the eeprom not flash afaik?

k0mpresd
14th May, 2012, 11:50 PM
right, death code shows in picture but not in your eeprom. did you look at it with a hex editor? i have fixed other ecus same way as in the picture but your dump does not have it. lemmiwinks patches settings in ram then when the ecu shuts down they are written to the eeprom.

oep
14th May, 2012, 11:56 PM
what the hell is wrong here then...
All in all, the only way code go away is with other dump :stoned:

k0mpresd
15th May, 2012, 12:00 AM
i have lots of dumps on my laptop at home but i am 5hrs away currently. i can send you a dump wednesday when i am back home.

oep
15th May, 2012, 12:17 AM
thanks k0mpresd, i hope someone else will unleash his secret folder sooner :))

oep
15th May, 2012, 10:38 AM
still looking for dump, anyone?

oep
15th May, 2012, 04:31 PM
Fixed!
thanks all

k0mpresd
15th May, 2012, 11:35 PM
and solution was?

oep
15th May, 2012, 11:58 PM
other dump :)

Roland81
7th January, 2014, 02:44 PM
Hello,

I Need a orignial dump from 8E0909518AL ... Can somebody send me the dump?! Thanks!