DFP/FAP off A4 2007 BOSCH EDC16U31 0281013293 03G906016KN

[melcool]

Hello!
Please I need help to remove DFP/FAP for:
A4 2.0d 2007 BOSCH EDC16U31 0281013293 03G906016KN
tried with EcuSafe but light remain in Dashboard and in Engine ECU no errors and no more than 3000rot/min
BDM flash read below!
Please help!
Many THX

[spawns3]

only switch solution .

[melcool]

I Ecu safe see Switch and lev.2!!!
I don't understand that switch is but if you can help me I will be grateful!

[spawns3]

Mate sorry , but good solutions for DPF is not free , we all pay for that.

[spawns3]

If u keep all sensors on exhaust is only 1 switch , if u want remove the temperature sensor is more 1 switch .

[melcool]

I know m8...I have always helped HERE for nothing .... BUT Thank You anyway

[melcool]

Engine BPW 103kw
with original flash I have 1 error
008194 - Particle Filter Bank 1: Malfunction
glow lamp is flashing in dashboard LCD is DFP icon car is in limp-mode

[peko]

hi friend

i have file mod without dpf ( ori & mod without dpf ) from 2L tdi 140hp , tested ok !
but is not same as your, but maybe you can compare and adapte it in your ori
say me if you need it, i share for free ;)

[ross79ta]

may you share pls?
Thank you

[melcool]

bump
:saint:

[ecutuners]

File here
Pass PM

[melcool]

THX I will test now and reply

[melcool]

DFP removed from exhaust, all sensors are connected ...with the above flash car has no errors, no lamp blinking but still only 3000rot!!!!!!
Can it be something else, for this car to be in limp-mode???

[edc]

DFP removed from exhaust, all sensors are connected ...with the above flash car has no errors, no lamp blinking but still only 3000rot!!!!!!
Can it be something else, for this car to be in limp-mode???

maybe problem is not the DPF , have U done the diagnostic , and I do not mena only check DTC's ?

[spawns3]

Mate i speak with the dealer here , and he tell me your car is in emergency mode because ash counter , the only way now is to tell to ecu that u have a new DPF , to reset the ash counter.

Cheers

[melcool]

how to do this?

[spawns3]

With vas , or vag-com.

[srscrash]

Mate sorry , but good solutions for DPF is not free , we all pay for that.

I see now...

After all who is who??
BR,srscrash

[spawns3]

O meu granda cabr?x . Ask to the melcool if i don't help him for free .

Here on DK i haven't selling one dump !And if the solution is not free a give information to speak with who have this solutions too.

[melcool]

Yes is true what spawns3 tells !!!
and I thank him !!!
Please don't start fights here!
THX all

[mbtun]

were the DTC removed in the DPF OFF file?

[spawns3]

He have the car in emergency mode. even if u close the DTC the car still in emergency mode . He have to reset the ash counter in eprom . Or with vas program like change to a new dpf to reset the ash counter

[melcool]

I have made a tour with A4 today.... and car is NOT in limp-mode on RUNNING ....like it was BEFORE with DFP ON!
This if so damn strange!
If I keep car standing ... no more than 3000rot/min... but IF I drive with it runs like HELL :))))))))))))) I mean it runs PERFECT :)))
what is this?!?!?!?!?

So I must say that dump from ecutuners is good ....including eeprom 95320 with 0% ash!!!

THX ecutuners
THX spawns3
THX All from this Thread for contribution

[spawns3]

I have made a tour with A4 today.... and car is NOT in limp-mode on RUNNING ....like it was BEFORE with DFP ON!
This if so damn strange!
If I keep car standing ... no more than 3000rot/min... but IF I drive with it runs like HELL :))))))))))))) I mean it runs PERFECT :)))
what is this?!?!?!?!?

So I must say that dump from ecutuners is good ....including eeprom 95320 with 0% ash!!!

THX ecutuners
THX spawns3
THX All from this Thread for contribution


it's the LC : ) "launch control" if u press clutch the car don't pass 3000rpm and if u are in N and don't pressing the clutch the car make more than 3000rpm.