View Full Version : Mazda denso fap
Debug
17th May, 2012, 05:26 PM
Hi all dk i need fap off for mazda 6 2.0d i need profesional to help i try already many files from members here and not work! not refund my money :(. i ask for profesional help please! car have restricted throttle to 3000tr, warning lamp is ON and regener is ON.
File read with piasini
baltazar3
17th May, 2012, 08:11 PM
Best solution is DPF emulator for that engine.
augustinbz
17th May, 2012, 11:04 PM
check this file friend
for sure will work and will not limp at 3000 rpm
passwd in PM
ominimicu
17th May, 2012, 11:47 PM
User Ecutuners really knows how to manually off that DPF
Debug
18th May, 2012, 07:39 AM
check this file friend
for sure will work and will not limp at 3000 rpm
passwd in PM
Your file is original! anyone can help me plese ?
ecutuners
18th May, 2012, 08:00 AM
Here is your file working 100%
Pass to PM
Debug
18th May, 2012, 11:36 AM
Here is your file working 100%
Pass to PM
Ecutuner thanks you friend your file is work perfect!
elecman
18th May, 2012, 12:04 PM
You can send me the pass please.
THANKS
ominimicu
18th May, 2012, 11:40 PM
I told you the guy knows...
rpower
31st May, 2012, 04:14 PM
can anyone help me with this or guive me pass for "Micro_sh7058_dpf_off_ecutuners"
Regads ,Rpower
choro
31st May, 2012, 05:00 PM
please hel me I need dpf off
z786
31st May, 2012, 11:53 PM
wat did u guys use to read ecu?
Meat-Head
31st May, 2012, 11:58 PM
File read with piasini
wat did u guys use to read ecu?
Good question Z mate.
z786
1st June, 2012, 12:31 AM
Good question Z mate.
i know :)
the 2 people before my post it was for them
wat did u guys use to read ecu?
tuningschool
1st June, 2012, 12:53 AM
100 % denso dpf off
pass in PM
choro
1st June, 2012, 07:21 AM
wat did u guys use to read ecu?
I read with piasini
furnata
1st June, 2012, 07:27 AM
K-TAG read Denso too - very well
dyc
1st June, 2012, 07:47 AM
100 % denso dpf off
pass in PM
can you send password to this file please?
thanks in advance
rpower
1st June, 2012, 12:03 PM
The file that tunningschool send is 100% org no dpf off if you have solution tell me I pay if you don?t want share
Regards Rpower
rpower
1st June, 2012, 09:17 PM
with some time and many brayns burned i do al regenerations and fap reset in ecu... in this moment i just need solution for flash ecu someone to help Regards
Rpower
mbtun
2nd June, 2012, 02:28 PM
you posted same ori file?:D
mariooo
2nd June, 2012, 04:24 PM
in this discussion there are many passwords that file!! ;-) Nice help
rpower
3rd June, 2012, 09:54 PM
I?m testing solution from ecutunners but not success at the moment anyone more to help me?
Regards ,Rpower
mbtun
3rd June, 2012, 10:24 PM
So ecutuners solutions don't work in the end? Thank you for feedback!
ecutuners
4th June, 2012, 09:51 AM
I?m testing solution from ecutunners but not success at the moment anyone more to help me?
Regards ,Rpower
i make many of them and all work fine except yours? i make the exact same flash as yours in 3 mazda all work fine so problem is that you make mistake when clear ash level oil level and dpf reset, for best results use x431, you must reset all then write file after, thrn you will have no problems like the others that used my solution.
ecutuners
4th June, 2012, 09:58 AM
yes we know swiftec dont work, only manual remove works
rpower
4th June, 2012, 10:03 AM
OK I?M reflashing ecu with ogr files and do all resets again and put the results later
Regards
rpower
4th June, 2012, 11:51 AM
After some search i think I have the solution I already do 50km and all ok for now...
I will do more some km to do a good test and after that put the Results
rpower
5th June, 2012, 09:27 AM
Limp mode again and again after 70km ... Solution from ecutunners still not working form me
wen I remove DPF inside the pipe I don?t remove catalyst can be because that?
Regards and thanks
sherl645
7th June, 2012, 09:30 PM
Hi,
What fault are you getting?
Ronan
rego88
29th June, 2012, 12:52 AM
Here is your file working 100%
Pass to PM
sorry... is possible have the password?? thanks in advance!!
fuseppe
30th June, 2012, 03:31 PM
sorry... is possible have the password?? thanks in advance!!
can i have the pass?...please..
Gery
30th June, 2012, 06:29 PM
pass please
thanks
pro_z
1st July, 2012, 10:36 AM
Hi all friends from DK. :hello:
Can someone turn off DPF in my file ? I tried other file, but no succeed.
File read by Piassini.
Thx for interesting.
pepeoi
3rd July, 2012, 01:58 PM
I trying to sort same problem... car off road long time now....
pepeoi
3rd July, 2012, 02:20 PM
Hi ecutuners, can you please help with this DPF OFF?
Many thanx !
popescovici11
4th July, 2012, 11:44 PM
i also have this problem with my Mazda
pepeoi
7th July, 2012, 09:22 AM
Sorted it in the end... working good.
fuseppe
7th July, 2012, 09:39 AM
how do you sort?
csavargo2
24th July, 2012, 01:06 PM
do you still need the dpf off?
elecman
5th August, 2012, 01:39 PM
Please i need help with a fap off in mazda 6 denso rf7j, the car is in limp mod don't pass 3000rpm
Thank's
kennfeld
7th November, 2012, 04:16 PM
Limp mode again and again after 70km ... Solution from ecutunners still not working form me
wen I remove DPF inside the pipe I don?t remove catalyst can be because that?
Regards and thanks
Limp mode perhaps due to other problem on your car ....
i don't have see the file from ecutuner because i have no pass but ... i think he know what he do ....
ecu tuner if you read me you can send me the pass by mp
i can write that file obd
i can write that files obd .....
atomiczen
30th November, 2012, 02:05 AM
for a working solution dpf off you need some step first to write your file into the car:
1.clear all dtc
2.new dpf initialization with a diag
then write your file
a lot of denso solution for now are "dpf emulation" so all need to work well
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.