IDC A09 with RD4N1M-02 help with wirings

[tunnel]

hello,
i need diagram to link IDC A09 with RD4N1M-02.

Photo of IDC A09's connector:
http://img137.imageshack.us/img137/3017/idca09.jpg


Photo of RD4N1M-02's connector:
http://img72.imageshack.us/img72/2871/conradio.jpg

i wait for your reply
thanks in advance

[tvzmaj]

Shematic diagram A09 (http://www.eserviceinfo.com/index.php?what=search2&searchstring=IDC+A09)

ISO2 connector
http://teletehnika.info/uploads/pins/files/blaupunkt-cd30.jpg

[m3mpower]

hello,
i need diagram to link IDC A09 with RD4N1M-02.

i wait for your reply
thanks in advance

Hi
It's impossible to link a cd changer IDC A09 to RD4 because IDC A09 is only for VAN Bus so it is only compatible with RD3.

To link with RD4 you will need CD changer IDC A04, and to link these two you only need the wiring loom between the two which is not too expensive from main dealer

Regards

[tunnel]

Hi
It's impossible to link a cd changer IDC A09 to RD4 because IDC A09 is only for VAN Bus so it is only compatible with RD3.

To link with RD4 you will need CD changer IDC A04, and to link these two you only need the wiring loom between the two which is not too expensive from main dealer

Regards

i can mount :
rd4 or 22rc280

but i need however pinout of idc a09 to link with 22rc280.

i hope that you can help me

[m3mpower]

i can mount :
rd4 or 22rc280

but i need however pinout of idc a09 to link with 22rc280.

i hope that you can help me

Hi
Why don't you use the connecting cable / loom between the two?
So you want to connect to RD3 ?

[tunnel]

Hi
Why don't you use the connecting cable / loom between the two?
So you want to connect to RD3 ?


hi,
i have rd4 or this radio (see the photo)
http://img152.imageshack.us/img152/5139/img2214q.jpg

with this connector:
http://img69.imageshack.us/img69/4189/img2215q.jpg

i need this cable but i can not find this...
i must make this cable but i need diagram or pinout of idc a09...
http://img4.imageshack.us/img4/3017/idca09.jpg

[m3mpower]

Hi
The stereo you have is not RD4 !
You can buy that cable from Peugeot or Citroen.
Anyway, i do have one, let me see if i can send you the pin out of the cable, there are 8 wires, and they connect to the RD3 CD changer connector, look at the photo below

http://i187.photobucket.com/albums/x244/m3mpower/img2215q-1.jpg

[tunnel]

i know that i must use blu mini iso connector...
if you send me pinout of 8wires on cable you solve me problem
i wait your reply

[RadioChiP]

http://img4.imageshack.us/img4/3017/idca09.jpg

Hello

You need this pictures cable schematics?If yes tomorrow I will send you schematics.

[tunnel]

http://img4.imageshack.us/img4/3017/idca09.jpg

Hello

You need this pictures cable schematics?If yes tomorrow I will send you schematics.

thank you, i am waiting your answer :)

[RadioChiP]

Try this schematics.

[bonus2010]

password protected :(

...may have been interesting for all :D

[karim]

Hi
Plaese pm

[exer]

Hi
Plaese pm
:listen:

Try this schematics.
:listen:

IDC-A09, what is the atomic bomb? :stupid::roflmao:

[m3mpower]

i know that i must use blu mini iso connector...
if you send me pinout of 8wires on cable you solve me problem
i wait your reply

Hi
Sorry for delay, i was busy..
Have a look at the photos below, i hope this will help you, there are 8 wires to be connected.
On the CD changer plug, there are 12 pins, but you only need 8.
I have marked the pins with 6 different colours
Let me know if this is OK for you

http://i187.photobucket.com/albums/x244/m3mpower/IMG_4952-1.jpg
http://i187.photobucket.com/albums/x244/m3mpower/IMG_4954-1.jpg

[RadioChiP]

password protected :(

...may have been interesting for all :D



Ok.Pass tunnel

[tunnel]

thanks to all,
can you help me with this connector?
[http://img155.imageshack.us/img155/1015/anschlusse.jpg

i have found idc a04... :dong:

[tunnel]

i have tried this cable:

idc04 -----rd4 (part c)

1 7
3 1
5 10
6 4
7 2
8 NC
9 3
10 8

i listen rumor of cd changer but it doesn't work
i wait correct pin

[alex77vl]

Hello friends,

I have a idc a 09 and i have the conector for vw gamma v but still not work.I want a schematic with the wires for i can modify the conector.I changed allready green wire with the red wire and now the changer is on but still do not comunicate with my gamma v

[m3mpower]

i have tried this cable:

idc04 -----rd4 (part c)

1 7
3 1
5 10
6 4
7 2
8 NC
9 3
10 8

i listen rumor of cd changer but it doesn't work
i wait correct pin

Hi
What are you trying to do exactly, connect to RD3 or RD4 ?
Because first you asked about RD3 and now RD4 ?
Also, the RD4 must be programmed to accept CD changer, otherwise CD changer will not work

Regards

[alex77vl]

I have a gamma v radiocaset and i bought a blaupunkt idc a 09 and not work.I think i must change some wires but i don1t know what wires.

[tunnel]

Hi
What are you trying to do exactly, connect to RD3 or RD4 ?
Because first you asked about RD3 and now RD4 ?
Also, the RD4 must be programmed to accept CD changer, otherwise CD changer will not work

Regards

thank you for the help,
i am trying to connect rd4 with idc a04.
With Texa Diagnosis i have activated cd changer, it works:
when i press 1,2,3,4,5 it select cd,
when i hold down it ejects cd,
but i can't listen any audio....
I don't know if i use correct diagram or if i need other activation with psa diag...
i wait for your reply

[tunnel]

when i press source it doesn't find cd changer....

[m3mpower]

thank you for the help,
i am trying to connect rd4 with idc a04.
With Texa Diagnosis i have activated cd changer, it works:
when i press 1,2,3,4,5 it select cd,
when i hold down it ejects cd,
but i can't listen any audio....
I don't know if i use correct diagram or if i need other activation with psa diag...
i wait for your reply

Hi
Are all the lights 1, 2, 3, 4, 5 flashing ?
Do you get any sound from RD4 alone without connecting the CD changer?

[tunnel]

Hi
Are all the lights 1, 2, 3, 4, 5 flashing ?
Do you get any sound from RD4 alone without connecting the CD changer?

Rd4 work perfectly on peugeot 207.
When i connect cd changer rd4 work, i press source button on steering and select cd(work), radio (work), and Aux1 that not work...
The light 1,2,3,4,5 on cd changer not flash, if i press 1 the button 1 it turn on, if i press 2 the button turn on etc etc....
I can eject cd holding button...but on display of car there is only Aux1...no sound....
if you want i post diagram that i have used...i think that is incorrect diagram

[m3mpower]

Rd4 work perfectly on peugeot 207.
When i connect cd changer rd4 work, i press source button on steering and select cd(work), radio (work), and Aux1 that not work...
The light 1,2,3,4,5 on cd changer not flash, if i press 1 the button 1 it turn on, if i press 2 the button turn on etc etc....
I can eject cd holding button...but on display of car there is only Aux1...no sound....
if you want i post diagram that i have used...i think that is incorrect diagram

Hi
Did you activate CD changer in BSI ? if not, the CD changer will not work
Also, double check your cable

Regards

[tunnel]

http://img444.imageshack.us/img444/2458/diagramo.jpg[/URL]

this is diagram that i have used.
i wait for your reply
thank again for the help

[tunnel]

Hi
Did you activate CD changer in BSI ? if not, the CD changer will not work
Also, double check your cable

Regards

see the diagram, however i have activated cd changer only in radio diagnosis

[m3mpower]

see the diagram, however i have activated cd changer only in radio diagnosis


Hi
With PP2000, you must to go to BSI configuration and activate CD Changer

[tunnel]

Hi
With PP2000, you must to go to BSI configuration and activate CD Changer

Can you tell me if diagram is correct?
and i have tried with pp2000 but the diag not enter....
i have problem with this diag....

[m3mpower]

Can you tell me if diagram is correct?
and i have tried with pp2000 but the diag not enter....
i have problem with this diag....

Hi
Your diagram is not correct
On the CD changer connector, swap the Green with Blue and Blue with Green, that's pins 4 and 10 on part C connector
If your 207 never had a changer before, you have to enable CD changer option in BSI configuration menu, otherwise the CD changer will never work !