PDA

View Full Version : Fiat F199 Delphi Grundig not work after rewrite eeprom


paljamp
19th May, 2012, 12:08 AM
Hi guys,

I have a problem with Delphi Grundig Fiat F199, after rewrite dump file original, now not turning on, is possible solve this problem? Thanks.
Dane-Elec
19th May, 2012, 12:41 AM
Hi guys,

I have a problem with Delphi Grundig Fiat F199, after rewrite dump file original, now not turning on, is possible solve this problem? Thanks.
Check position of eep and also soldering..

Dane
paljamp
19th May, 2012, 06:48 PM
Check position of eep and also soldering..
Dane
Hi friend, thanks for answer, but i do not believe the wrong position, but now I have a doubt, you have a photo of the PCB eep position for this radio.
RadioChiP
19th May, 2012, 07:05 PM
Your second same problem.
http://www.digital-kaos.co.uk/forums/f176/rcd-310-rewrite-wrong-dump-file-now-not-turn-239864/

What is your programmer?
paljamp
19th May, 2012, 07:20 PM
yes you're right but the programmer is good, is willem, now removed eep and the display shows error 02, i tried to rewrite eep for blaupunkt radio it's ok, i do not know what can be and where I'm wrong
paljamp
19th May, 2012, 09:22 PM
problem solved, eep replaced with a new, radio turning on, but cancheck not solved...