Mercedes ML 270 cdi error start

[yssf]

Hi guys,
I got an error start and car won't start,
Pls i want to read the dump and post for immo off,but i don't know which is the eeprom,is it 8pins or 16pins....? and the reference,
Should i need to read the immo and ecu?
Thanks in advanced

[khalilo814]

the eeprom is 8pin ST 95p08

press thank's butt

[yssf]

Thanks mates,
But i couldn't find the eeprom according to the reference you gave me,there's in total 6,only 4 can be read,the 2 other no,the one in the middle and the last down(back side of the ecu)
Pls could you tell me which one should be?

Thanks

[bluesky2010]

Hi, what year is your truck ?

[AC_SHNITZER]

5P08 C3 =ST95P08 on back side of the PCB read it and post the dump

[yssf]

Thanks mates,
What's PCB? Did mean ecu or the black box on the right side of the steering,(driver side)pls!
Year:1999.

[Shmortz]

as I know there is not immo off option in this ECU, only virigin 5P08 and then marry it again to immo with Star.
that must be 5 plugs Bosch ECU, eeprom is located on the back side on the board...