PDA

View Full Version : is X431 Diagun Working with Laptop?



husen786
29th May, 2012, 04:47 PM
Recently I have hear about x431 diagun working with laptop without main unit.

just need to buy diagun bluetooth smart box, necessary cables and software that on SD card.

Now if any one know how to configure it with laptop then pls reply here.

husen786
29th May, 2012, 04:49 PM
I got solution on
But its hard to understand pls if any one know then pls reply

husen786
29th May, 2012, 04:50 PM
Was doing alot of research and found this tidbit
Do you know you can operate your Diagun on your PC ?If you follow the given below procedures you may get the
amazing tips of using Diagun by another ingenious way.
Also just buying the obd2 smart connector alone can cost as little as $300-$500 so this makes this a fine tip for a cheap diagnostic powerhouse. Credit to original author Tommy if he is in fact the original poster of this info. This is NOT cracked software ! Fully legal.

Go to and click the link
xxxxxxxxxxxxxxxxxxxxx downlaod the
files

Inside are to folders:
1 ActiveSyncsetupchs
2 TF_card
The procedure is simple.
1 copy the TF_Card folder in the Diagun TF card
2 Install in your computer:
First ActiveSyncsetupchs (X431 Heavy duty|X431 Master|X431 Diagun|X431 spare parts |X431 software update (http://www.autobink.com)) to download it
Second remotedsp
After all is done you do it like this:
Connect the Diagun to the PC with USB cable
1 Run Remote Control Display Host ( from your Progarm Files
2 Go to your folder in TF_Card folder and Run cerdisp and then push Connect
Now you can use your Diagun through the PC

Hope this helps
Never did read the rules yet but in a hurry and hope I dont piss off any admins

https://rs838tl4.rapidshare.com/#!download|838l35|430583860|ActiveSyncsetupchs.rar |7798

sergej
29th May, 2012, 09:08 PM
See http://www.digital-kaos.co.uk/forums/f152/diagun-help-89625/index5.html#post1310198