PDA

View Full Version : ALFA Romeo DPF



BIOS
29th May, 2012, 08:55 PM
Alfa_159_2.4JTDm_147kW_200hp
EDC16C39 hw0281012145_sw1037377554_sw1037507421

Car came to my garage with DPF already removed from the exhaust.Flash done.

e2prom edited,but need checksumm to be done.
Ori is original 95640 file."EDIT" is file that needed checksumm to be done.

Thanks in advance.

ross79ta
29th May, 2012, 09:49 PM
Why remove dpf from e2p? It can be do by flash eprom...

BIOS
29th May, 2012, 10:18 PM
As I posted,flash is done.

But, because the dpf was removed before the car came to me,I couldn't make regeneration.The e2prom state should be as:replaced or dpf regenerated(ash content 0%).That's why I need to edit the eprom.

When I make a regeneration with KTS,the car is fine for 1-2 days.No dtc,no dash message,no post injection...After that time there is "dpf cloged" message on dash.

That's why I need "clear" file for the e2prom.

ross79ta
29th May, 2012, 11:17 PM
Doesn't exists cks for e2p.
Now, to solve your problem, you can do a simple thing: with KTS select the function like "dpf replacement", simulating the replacement of dpf. ;)

maxsek
16th October, 2018, 06:37 PM
please post flash file i need bdm read of this ecu if possible

michelebra
25th November, 2018, 02:24 AM
me too :D
please share !