bmw diamond

[oep]

Guys, how do you program key with remote using zed?
As option i chose remote key, but after coding it i see its still blank and car does not start.
Coded it as pcf, car runs but i cannot program remote.

help?

[topclef]

Program it manualy
1-Turn ignition ON , and back to off within 5 seconds.
2 - Remove the key from ignition and press and hold the unlock button for 15 seconds during this time press the key lock button 3 times within 5 seconds.
3 - Release both buttons.
4 - Doors will lock and unlock to show correct programming has occurred.

Good Luck

[oep]

thanks man, i used auto-data procedure but it seems is missing part of holding 15seconds unlock button.
will try now..

[znakedwrx]

Sometimes you need to CYCLE key 5 times (ignition on/off), take out the key and hold unlock button and press 3x lock.

Make sure all doors closed and unlocked!

[oep]

Yes i managed to sync it, zv respond unlock lock, but after that the key wont work open/close.
I've tried same remote on other car and its working ok.
... thanks for help guys