View Full Version : toyota prius 2011, usa
serg2
3rd June, 2012, 05:02 PM
Hi,
All keys lost.
How to write key?
Teachstream and Avdi cannot do reset smart code.
Thanks.
marco70
3rd June, 2012, 05:09 PM
Post dump smartkey ecu memory seiko 93C86 or 93C66
You have to buy a new card.
serg2
3rd June, 2012, 05:15 PM
I have used key, it would not go?
Dump only smartkey ecu?
where he is? How to find it?
bram380
3rd June, 2012, 05:22 PM
post here passcode 6 or 96 digits
serg2
3rd June, 2012, 05:25 PM
9e8f349af0280502e02f421590ad9312389fd4cfee1c3dd5de 97ac00cfc0a1c44cf1cfef38d8682735b32e2d03720003
marco70
3rd June, 2012, 05:25 PM
Go to reset it
The right side of the compartment
bram380
3rd June, 2012, 05:31 PM
9e8f349af0280502e02f421590ad9312389fd4cfee1c3dd5de 97ac00cfc0a1c44cf1cfef38d8682735b32e2d03720003
here pass-code:
003060
serg2
3rd June, 2012, 05:31 PM
I think the problem is not with the code.
Teachstream not connected with the smart code.
serg2
3rd June, 2012, 05:32 PM
I have a TANGO, the code I also tried
bram380
3rd June, 2012, 05:35 PM
make new key (tpx2).
then u can registered smartkey.
serg2
3rd June, 2012, 05:39 PM
make new key (tpx2).
then u can registered smartkey.
I can't make the smart code reset, how do I write a new key?
serg2
3rd June, 2012, 05:41 PM
Go to reset it
The right side of the compartment
And I was trying to do?
marco70
3rd June, 2012, 05:48 PM
During the reset procedure you open the driver's door?
serg2
3rd June, 2012, 05:49 PM
During the reset procedure you open the driver's door?
yes, door is open
marco70
3rd June, 2012, 05:51 PM
You have to try a virgin dump smartkey
serg2
3rd June, 2012, 05:53 PM
You have to try a virgin dump smartkey
where is smartkey ecu?
marco70
3rd June, 2012, 05:58 PM
Yes ecu smartkey and idcode box
serg2
3rd June, 2012, 06:00 PM
Yes ecu smartkey and idcode box
where they go?
Dylan Chin
5th June, 2012, 03:04 PM
dear mate, some type at trunk.i got a Avdi programmer.How can i use techstream by avdi?need add on anything or buy what software or got techstream software and device download.Thanks
eeddyy23
10th October, 2012, 10:18 AM
where they go?
they go behind the glove compartment did you fix this thing im having the same exact issue
eeddyy23
10th October, 2012, 10:34 AM
where they go?
http://alldatapro.com/alldata/PRO%7EV299405398%7EC48811%7ER0%7EOB0%7EP2R0X%7EN/0/159022445/161799260/164187503/164187505/34853741/34866247/56278003/56279609/178631726/169969276/162303490
eeddyy23
10th October, 2012, 10:47 AM
where they go?
http://alldatapro.com/alldata/PRO%7EV299405398%7EC48811%7ER0%7EOB0%7EP4R0H%7EN/0/159022445/161799260/164187503/164187505/34853741/34866247/56278003/56279606/124202582/178632676/170131315/166776816
KEY REGISTRATION
(a) PROCEDURE "A" New key ID registration (when replacing the certification ECU (smart key ECU assembly) and transmission control ECU assembly*1, or certification ECU (smart key ECU assembly) and ID code box (immobiliser code ECU)*2, or when replacing the certification ECU (smart key ECU assembly), ID code box (immobiliser code ECU) and transmission control ECU assembly*2)
*1: w/o Automatic Light Control System
*2: w/ Automatic Light Control System
*1: Repeat this process for each key which is to be registered for the vehicle. Finish the procedure for each key within 30 seconds. If the procedure for any of the keys has not been finished within the specified time, perform the registration procedures again from process 1. Make sure that only 1 key is in the cabin during the registration procedures. If 2 or more keys are in the cabin simultaneously, electric waves will interfere with each other, preventing normal registration.
(b) PROCEDURE "B" New key ID registration (when replacing the certification ECU (smart key ECU assembly))
*1: Repeat this process for each key which is not to be registered for the vehicle. Finish the procedure for each key within 30 seconds. If the procedure for any of the keys has not been finished within the specified time, perform the registration procedures again from process 1. If the key confirmation procedure for a key is performed, the security indicator light comes on and remains on until all the keys are confirmed.
*2: Repeat this process for each key which is to be registered for the vehicle. Finish the procedure for each key within 30 seconds. If the procedure for any of the keys has not been finished within the specified time, perform the registration procedures again from process 1. Make sure that only 1 key is in the cabin during the registration procedures. If 2 or more keys are in the cabin simultaneously, electric waves will interfere with each other, preventing normal registration.
seems like toyota has changed the whole thing on this new prius man hehehe another challenge to clear hope this helps a little bit
immo_key
11th October, 2012, 06:56 AM
I can't make the smart code reset, how do I write a new key?
Hi
As said bram
You need TMPro Bogi
Make key to TP2 by dump
Then add your Smart Key with tester
BR/imokey
eeddyy23
13th October, 2012, 05:32 AM
where they go?
new smart key and trans module after that let me add the key right out
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.