PDA

View Full Version : Renault Megane UCH fault



Turbo5GT
4th June, 2012, 08:49 PM
Hello,
I need help with Renault Megane 1.6 16v 2000 model.
The UCH changes it Immo type from 1 to 2, about every 6 to 12 months. And then the Car will not start with the immo light flashing. When i plug in the Clip diag Tool and change it back to type 1 the car starts and will be fine till next time. Is the fault software or hardware? Any help will be appreciate.:hmmmm2::banghead:

Thank you

TOINO
4th June, 2012, 09:08 PM
hello friend already had this same problem on a renault scenic ucbic changes the type of box 2 to 1 this happens when the battery drops to bottom of 8 voltos but do not know what is the solution, without being to keep the battery in good condition! or mount a more powerful battery of 65ah because the original must be 45 or 55ah! I have helped, I'm following your post to see if someone has a better solution!

leandroks
4th June, 2012, 11:31 PM
it is as the colegue said above, get a good batery and i ll be safe till the voltage get low again. It is software problem, to solve it for good u can either program a f2 key on it and leave as it is or get rid of the immo..

Turbo5GT
5th June, 2012, 07:56 PM
Cool,
Think i will just immo off to play it safe, has the battery is tested ok.

Thank you for all your help
:burnout:

doudou241
5th June, 2012, 08:12 PM
emulator+flash is ok for your problem or change ucbic