Zed-Bull clone - Second Life

[dam495]

guys are there any possibility, now or in the future for zed bull +effi be able to clone texas 4d and id46 ?

[sierra]

The cloning of transponder is realized in the Zed-Bull device. The software though EFfI though Zed-Bull has no relation to cloning.

[vando]

Can i use Zed-Bull (effi) for prepared megamos crypto id:48 tp23(A1)
anybody tested on EFfI Megamos Crypto does it work

[haris78]

Version 2.0.0.2.4(Current version)
-Fixed bugs!!!
-Add Module 115 - Ford - Delphi ECU 4D-60

Version 2.0.0.2.3
-Add Module 113 - BMW Motorcycle - Tricore
-Add Module 114 - BMW Motorcycle - MPC562
-Add Fiat, Iveco, Opel Zafira in Crypto 46 "Image Generator"
-Some bugs fixed

Version 2.0.0.2.2
-Add Module 112 - Scooters - EFi Tehnology
-Fixed mistake with all ID46 modules
-Some bugs fixed

Version 2.0.0.2.1
-In the module 111 PCF7942/44 is added
-Changes in Hitag2 tab
-Some bugs fixed

Version 2.0.0.1.9
-Finally repaired Modules 57, 77, 98, 99, 100(PCF7946/47)
-Added Module 111 - BMW CAS1, CAS2, CAS3
-Some bugs fixed

Version 2.0.0.1.8
-Improved Module 102 (262144 Bytes)
-Fixed Module 57 and Module 100(for PCF7946/47)

Version 2.0.0.1.7
-Fixed Module 4 in "Vag Ecu Eeprom"
-Fixed Module 21
-In Module 84 added support 2J74Y
-Fixed and Improved Mudule 5 in "Vag Ecu Eeprom"
-Fixed Module 18
-Fixed Kia-Hyundai Pin Code

Version 2.0.0.1.6
-Improved Modul 107
-Improved Modul 67(Autodetect Swap)
-Added Module 109 - Mitsubishi Lancer, Grandis 2004-2007
-Added Module 110 - Toyota Yaris 2008
-In Module 69 feature added "Key to Dump"
-Fixed Module 77
-Fixed Module 26
-Improved Read/Write
-Some bugs fixed.

Version 2.0.0.1.5
-Add Canbus Prepare in "Image Generator"
-Added function "Re Calculate" for ID11, ID12, ID13
-Added Module 108 - Subaru Outback 2005>

Version 2.0.0.1.4
-Add Module 107 - Citroen, Peugeot 2000-2002 (uPD780949)
-Fixed "Unlock 46"
-Some bugs fixed

Version 2.0.0.1.3
-Added Module 49 feature "Key to Dump"

Version 2.0.0.1.2
-Made in the Module 95 calculation Pin Code.

Version 2.0.0.1.1
-In Module 59 feature added "Key to Dump".
-Added in 102 Module calculation for size
of dump 327680 bytes.

Version 2.0.0.1.0
-Added Module 106 - Renault Premium, Midlum -2007

Version 2.0.0.0.9
-Fixed Modul 14.
-Some bugs fixed.

Version 2.0.0.0.8
-In Module 15 feature added "Key to Dump".

Version 2.0.0.0.7
-In Module 58 feature added "Key to Dump".
-Made in the Module 100 calculation Pin Code.
-Added Module 105 - Toyota, Daihatsu
Write transponder and feature "Key to Dump"
-In Module 15 feature added "Key to Dump".

Version 2.0.0.0.6
-Some bugs fixed.

Version 2.0.0.0.5
-Made auto detection dumps Module 6 in "Manual Detect".
-Modules 5 and 6 are moved from Manual Detect
in Auto Detect.
-Added Module 104 - Auto detect dump.

Version 2.0.0.0.4
-In Modules 37 and 39 feature added "Key to Dump".
Need dumps for other modules with ID: 4C
Please send me who have.
-Some bugs fixed.

Version 2.0.0.0.3
-Added Module 6 in Manual Detect.
Piaggio Vespa.
-Fixed all modules ID: 4C
Incorrect were calculated data to write

Version 2.0.0.0.2
-Improved Module 20.
No Tested

-In Module 22 feature added "Key to Dump".
Only for dumps 256 Bytes.
Send me a dump of 512 bytes and I'll do them too.
No Tested

-Began to make the help file for the program.
Will be updated infrequently :)

-Some bugs fixed.


Source:


EFfI - Second Life for Zed-Bull clone - ????? ???? ???! (http://forum.softtyt.ru/showthread.php?t=1160)

[siyadk]

module 23 ... Key to dump doesnt work...

[siyadk]

what is this swap button for?? swapping of what??

[sierra]

module 23 ... Key to dump doesnt work...
You have a dump for this module?

[sierra]

what is this swap button for?? swapping of what??
This button does nothing. Simply shows what loaded dump.

[siyadk]

this is dump i was talking about!!

[badenaleks]

for sierra

[kelekele]

I can't clear pcf7935as with effi.Use software 2.0.0.0.5.Any solution?

[jaelgti]

thanks sierra
A magnificent work.
regards

[badboymorad]

registration help plz

[siyadk]

it is not free software...need to pay for registration

[kelekele]

I can't clear pcf7935as with effi.Use software 2.0.0.0.5.Any solution?
When i start cleaning or writing pcf7935,screen of my zedbull device start blinking.Is it normal?

[siyadk]

Sierra...do u have any idea why this error message on zedbul??

[siyadk]

thanks for correction on module 23!!! Felt good when a bug was reported and fixed the bug within hours!!

[sierra]

Sierra...do u have any idea why this error message on zedbul??
I don't know. There can be some options.
Serial number in MCU and DS doesn't coincide.
The such can happens if you tried to update Zed-Bull FW with other serial number.
Or something can happened to DS chip.
Open Zed-Bull, there can be a bad soldering.

[bram380]

I don't know. There can be some options.
Serial number in MCU and DS doesn't coincide.
The such can happens if you tried to update Zed-Bull FW with other serial number.
Or something can happened to DS chip.
Open Zed-Bull, there can be a bad soldering.

Check flat cable internal zb.

[gttuning]

got my effi today:),looks good.

[ninja123]

yes mate, it is, pitty there is various arse holes flogging cracked versions all over the world, I just grassed on the ebay uk nob, again.

ninja

[gttuning]

yes mate, it is, pitty there is various arse holes flogging cracked versions all over the world, I just grassed on the ebay uk nob, again.

ninja
well i got my from sierra.

[gttuning]

to all who want to buy EFfi please buy original stuff to support this softwear so it will not die.there is not much difference in price between crack ver.!!!!!!!!

[nokwueze]

pls friends this is modula 95 mitsubishi E13 immobox
not supported
i have EFfI @KMS 2011 SOFT WARE

[andrius]

exact model and year please :)

[ISABINO]

someone has a solution to add keys captiva antara immo bosch 95040
effi not open these files

[ninja123]

I see from some posts and from updates list, unlock 46, where is this function and what does it do? im not stupid, I guess it unlock id46, but how, what type pcf and where do i find this function?

thanks, ninja

[sierra]

Unlock ID46 was made for transponders which themselves were recorded using modules.
At the moment, temporarily disabled this feature.

[ninja123]

ok, was it not working good, or other reason?

Thanks for super fast reply, ninja

[sierra]

Feature to work properly, removed for other reasons.

[nokwueze]

the car is lancer 2005 pls seria help me out

[ninja123]

Feature to work properly, removed for other reasons.

Will this feature be making a return in the future?

Thanks, ninja

[andrius]

what eeprom is in this lancer? neither tango, neither tmpro will recognize the dump.

[nokwueze]

what eeprom is in this lancer? neither tango, neither tmpro will recognize the dump.

the eeprom is 24c02

[gttuning]

hi can effi generate transponder dump from immo file?

[badenaleks]

nokwueze you dump need read 24c01!
I checked it with your dump Lancer 9 pin I also checked it 100% correct (laner9). At EEPROM very difficult to see the latest Digits (24c0?).

[badenaleks]

There EEPROM 24s01! There's not seen the last of Digits, I am very well aware of the dump, I fixed it (create one of its smaller and it opens correctly in EFFI!)

[nokwueze]

friends the dump is 24co2
the device is the same in module 95. Mitsubishi - mitsubishi E13 immobox of seria software of zedbull
pls help me out my brothers

[sierra]

friends the dump is 24co2
the device is the same in module 95. Mitsubishi - mitsubishi E13 immobox of seria software of zedbull
pls help me out my brothers
badenaleks prompted to you that it is necessary to do.
Cut off a half of a dump and do a key via the module 109.

[andrius]

i have told it him too long time ago :) http://www.digital-kaos.co.uk/forums/f178/mitsubishi-immo-key-data-337619/

[mvtamele]

my effi soft is dead i have updated it now it says file corrupted or is manipulated what is wrong?
MY SOFT IS ORIGINAL i am sierra supporter so why this now?198033
here is the file attached

[sierra]

mvtamele You forgot my e-mail address?
Likely on similar questions I need to write personally on e-mail.

[mvtamele]

my effi soft is dead i have updated it now it says file corrupted or is manipulated what is wrong?
MY SOFT IS ORIGINAL i am sierra supporter so why this now?198033
here is the file attached

OK SORRY I AM GOING THERE

[NILTON]

FOR SIERRA .
Dear Sierra 've tried making my contribution to the EFFI but my city is in a very remote and distant .
It is very difficult to send you my monetary contribution to the increase of this wonderful software .
With all due respect SIERRA , Allow me a suggestion please.
If there was a SITE where all stakeholders could acquire EFFI , and there were also options for the payment , I believe that his work would have reconehcimento by which you really are worthy of receiving it , would be valued and rewarded .
But it is only my suggestion .
a thought of mine.
Please excuse me if I do not make mistakes in my words . HAVE MUCH INTEREST IN GETTING THIS SOFTWA

[sierra]

It seems, all main methods of payment are present.
What else it is necessary?

[NILTON]

FOR SIERRA .
Thank you for having responded SIERRA me .
But Please , do not want to be inconvenient .
You could post here all the payment methods available .
I do not think I have access to all of them .
What I have at hand is : Western Union and Money Web .
By these methods can not make money .

[siyadk]

Nilton, u have to inderstand the sieera as well. He cannot disclose many information here because he might get banned if admin feel that there is a selling involved. Contact him via email or pm

Sent from my GT-I9300 using Tapatalk 2

[3abas27]

hi
all info about effi program payement and news are in this link
EFfI - Second Life for Zed-Bull clone - ????? ???? ???! (http://forum.softtyt.ru/showthread.php?t=1160)
also payement via western included

[gttuning]

Hi guys have a LDV VAN 2005 lost the key what need to program key.what softwear?customer have a new key from dealer.any body with experience.thanks

[siyadk]

sierra, my zedbull crashed 2 weeks ago... i have ordered a new one.. Will it work with effi or should i register again and send out.lic again?

[whiskeyman]

another ebay con
ZED BULL EFfi 2011 Key Encrypter Programmer with 107 available modules | eBay (http://www.ebay.co.uk/itm/ZED-BULL-EFfi-2011-Key-Encrypter-Programmer-with-107-available-modules-/321123619700?pt=UK_Diagnostic_Tools_Equipment&hash=item4ac4759374)

[gttuning]

100 pounds must be a joke NOT WORTH.

[3abas27]

now effi is with 122 modules stable no bug
100 euro for version with bugs is lost of money

[nokwueze]

pls 3abas27 how do i get this zeb bull Effi module 122 mine stoped at 107 and is not working

[3abas27]

buy licence from author sierra

[badenaleks]

sierra add :Version 2.0.0.2.9(Current version)

[isaky]

can write a TPX1 TPX2 or clone from the dump loaded in EFI????

[qwertyuiop12]

Writes on the TPX 1 and 2 through the TPX dump

[qwertyuiop12]

Writes on TPX1 and TPX2 via dump

[iozo]

can not write on tpx-1 , tested last week on module 83 ford KA delphi ecu - unsuccessful ... , last time ago try module 66 unsuccessful when try to write tpx2 only pin calc ... may be on eh2 work fine .

[qwertyuiop12]

Yesterday recorded on via the Renault (Maker 66. Renault Siemens-UCH) recorded on the TPX 2 recorded without problems.

[isaky]

can not write on tpx-1 , tested last week on module 83 ford KA delphi ecu - unsuccessful ... , last time ago try module 66 unsuccessful when try to write tpx2 only pin calc ... may be on eh2 work fine .
yes i can write in eh2 but i not nat can write tpx1 and tpx2 i not have nothing only zed bull no module anything ...
i have a first soft i not pay is possible here the problem????
if i can write the tpx only for i pay at now i work ford and toyota.
thank you friend

[3abas27]

yes freind with latest update you can do no problem
now effi with 124 modules

[nokwueze]

3abas27 pls friend where do i buy licence pls direct me pls

[nokwueze]

3abas27 pls friend where do i buy licence pls direct me pls

[qwertyuiop12]

nokwueze EFfI - Second Life for Zed-Bull clone - ????? ???? ???! (http://forum.softtyt.ru/showthread.php?t=1160) here to buy

[sierra]

I never checked record on TPX1 and TPX2, anything I can't tell.
But some write that normally writes down. Maybe depends on quality of a clone.
At record at once gives out a mistake or during record?

In Zed-Bull in the menu there is "Test" by means of which it is possible to choose the best a position of a transponder.

201477

[mvtamele]

good soft but with big problems i got original EFFI but after update i have always to register again and again becouse the soft crash and an error comes say soft corrupted or infected by a virus bla bla bla what is wrong ?

[sierra]

good soft but with big problems i got original EFFI but after update i have always to register again and again becouse the soft crash and an error comes say soft corrupted or infected by a virus bla bla bla what is wrong ?
Write there where you took the software.

[daniersms]

My effi works great which I bought from sierra and he has send us many updates afterwards with no problems

[3abas27]

the effi licenced now no bugs i test many modules all work fine who tald that effi with big bugs perhaps he used old soft
or perhaps his hardware is not good
in one month more than 10 modules added for free

[ninja123]

i agree, EFfi works fine.

Zedbull clone cannot write to tpx1, eh2 works ok, if you want to write to ID4C then use zedbull clone chip, they work perfect, I have not tried tpx2 yet, but I have used lots of the zedbull ones and they work great and are cheaper than tpx1 too.

ninja

[ninja123]

In module 57, for fiat code 3 ID46, I make transponder, but what tool can add this via OBD? SBB only list 1999- which is code 2 ID48 :(

Thanks for any info, ninja

[rayjay]

peugeot id45 clone via EFfi what is the sequence for this to clone onto PCF 7935 does it just get done via reading the id45 then writing to another without the need of precoding, as i assume the precoding for the pcf7935 is just for obd....i dont have the pug package on the mira so need to do via zed and EFfi

[elephantul]

In module 57, for fiat code 3 ID46, I make transponder, but what tool can add this via OBD? SBB only list 1999- which is code 2 ID48 :(

Thanks for any info, ninja


Autocom can do that

[3abas27]

are you testing autocom with key learning fiat ?

[lupu_sandu]

I learn key in Fiat Ducato 2007 with autocom and was ok. Key was precoded 1st

[3abas27]

yes fom fiat ducato is like citroen jumper and peugeot boxer key can be added with lexia or pps but for fiat fiat punto with bsi inside chip 93c86 key can be added with autocom?

[luis12]

Audi A4, 1998 2.8 engine Delphy immobox, works 100% but with Tango orig. cant doit because told dump blocked, with Effl all fine. Thanks Sierra...

[kelekele]

My zed-bull device(clone) read only T5 and pcf7935 transponders.Other not recognize at all.Try with removed transponders from key fob and nothing.Any solution for that situatuion?

[3abas27]

zed bull clone now only 100 dollars

[nokwueze]

3abas27
pls i want to buy the site is showing different language pls help me out

[iozo]

use google translate ;)

[Automat]

Wholesale zed bull - Buy Low Price zed bull Lots on Aliexpress.com (http://www.aliexpress.com/wholesale?SearchText=zed+bull&catId=0&initiative_id=AS_20130613130220)

[stalonerambo]

i found this guy selling the last version with 124 modules, i think you should know Atualiza??o Zed Bull 2013 Faz 124 Modulos - R$ 890,00 no MercadoLivre (/MLB-478991807-atualizaco-zed-bull-2013-faz-124-modulos-_JM) here another one Nova Zed Bull 2013 Com 124 Modolos - R$ 2.000,00 no MercadoLivre (/MLB-486123781-nova-zed-bull-2013-com-124-modolos-_JM) here another one full list a lots of guy selling the software, i think you should put protection for your software, Atualiza??ao Zed Bull - MercadoLivre Brasil (/atualiza%C3%83%C2%A7ao-zed-bull)

[qwertyuiop12]

New Version 2.0.0.3.3
-The Module 61 is remade and support of new dumps is added.
-In the Module 83 the "Key to Dump" function is added
-The Module 62 is remade.
-Add Module 126 - Mazda 6
-Some bugs fixed
http://forum.softtyt.ru/showthread.php?t=1160

[sierra]

i found this guy selling the last version with 124 modules, i think you should know Atualiza??o Zed Bull 2013 Faz 124 Modulos - R$ 890,00 no MercadoLivre (http:///MLB-478991807-atualizaco-zed-bull-2013-faz-124-modulos-_JM) here another one Nova Zed Bull 2013 Com 124 Modolos - R$ 2.000,00 no MercadoLivre (http:///MLB-486123781-nova-zed-bull-2013-com-124-modolos-_JM) here another one full list a lots of guy selling the software, i think you should put protection for your software, Atualiza??ao Zed Bull - MercadoLivre Brasil (http:///atualiza%C3%83%C2%A7ao-zed-bull)
It is deception :)
On screenshot to see that it is old versions.

[coder5]

hello
Does effi work with module 68 bmw .When I load dump from ews4.3
select key number and try to programme blank pcf7935 all I get is
cancelled in red in progress bar bottom left corner.
I would be grateful for any help.
Thanks
Larry.

[sierra]

hello
Does effi work with module 68 bmw .When I load dump from ews4.3
select key number and try to programme blank pcf7935 all I get is
cancelled in red in progress bar bottom left corner.
I would be grateful for any help.
Thanks
Larry.
Give a dump.

[coder5]

Thanks for reply. Here is dump.
Regards

[3abas27]

with registred effi you win support you win update
every version you find bug fixed siera work hardly to make his soft in top in 2 month effi begin with 110 module rgistred now has 126 modules all need to thanks this kind great man

[coder5]

hello Sierra.
Will you please advise me if the dump i sent you is ok,
or is there some other problem.I need to get this car
running again.
Thanks
Larry.

[Master01]

đđĐđß$đĐßđßđßđđääđłldkf>>;*;ßßߤߤ;>>;>ßߤ]$ß$÷÷×ßß]¤¤¤]ß$$[ß[¤ĐĐß[ß...

[dam495]

hi friends is it possible clone texas and id 46 using effi , zed bull china and this tooll zed bull work ? CN900 4D Decoder without connecting with the laptop with DHL Free-in Code Readers & Scan Tools from Automobiles & Motorcycles on Aliexpress.com (http://www.aliexpress.com/item/CN900-4D-Decoder-without-connecting-with-the-laptop-with-DHL-Free/676715459.html) 2013 Newest ID46 Decoder Box ID 46 Copy Box ND900 Key Programmer Support all ID46 Chip-in Auto Key Programmers from Automobiles & Motorcycles on Aliexpress.com (http://www.aliexpress.com/item/2013-Newest-ID46-Decoder-Box-ID-46-Copy-Box-ND900-Key-Programmer-Support-all-ID46-Chip/911253428.html)

[sierra]

hello Sierra.
Will you please advise me if the dump i sent you is ok,
or is there some other problem.I need to get this car
running again.
Thanks
Larry.

Your dump the normal.
You can write down these keys.

[coder5]

Many thanks Sierra I programmed two pcf7935 transponders
and it worked 100%.
Thanks again.
Larry.

[ninja123]

I learn key in Fiat Ducato 2007 with autocom and was ok. Key was precoded 1st

I have a 2009 ducato to do today, My autocom not arrived yet but I see EFfi now has a key to dump button :)

I will try this today and report - anyone tried this module yet? Working ok?

ninja

[ninja123]

I did ducato today, I read silly small eeprom and EFfi recognised dump ok, and give pin code.

Customer want 2 new keys, so I write 1 48 chip, then add to dump, then I reload new dump to EFfi, then write another 48 chip then add to dump.

I write last dump to eeprom and refit all, but not worked :(

Diagnostics say zero keys programmed and pin code incorrect.

I write ori dump back to silly little eeprom, then pincode is ok, and can program chips with MVP Pro and all is working.

Did I do something wrong or is there a problem with this module?

Thanks for any advice, ninja

[sierra]

I did ducato today, I read silly small eeprom and EFfi recognised dump ok, and give pin code.

Customer want 2 new keys, so I write 1 48 chip, then add to dump, then I reload new dump to EFfi, then write another 48 chip then add to dump.

I write last dump to eeprom and refit all, but not worked :(

Diagnostics say zero keys programmed and pin code incorrect.

I write ori dump back to silly little eeprom, then pincode is ok, and can program chips with MVP Pro and all is working.

Did I do something wrong or is there a problem with this module?

Thanks for any advice, ninja
What number of the module?

[javiemule]

hello I have a mini saw zed bull I can not link back to pc software as I can do?

[rayjay]

hello I have a mini saw zed bull I can not link back to pc software as I can do?

driver issue

[ninja123]

What number of the module?

module 14

thanks for looking at this sierra

ninja

[sierra]

Module 14 works normally EFfI - Second Life for Zed-Bull clone (http://forum.softtyt.ru/showthread.php?p=5848#post5848)

[ninja123]

Module 14 works normally EFfI - Second Life for Zed-Bull clone (http://forum.softtyt.ru/showthread.php?p=5848#post5848)

Maybe because I add 2 keys to dump, 1 at a time. This defo not worked for me, i will try adding just 1 key next time :)

Transponders precoded ok and pin ok so programmed via obd.

ninja

[sierra]

Need to add all the keys at once, then save the dump.
1. Prepare the required number of transponders via a button Tranponder Programming.
2. Add to dump all the prepared transponder via a button Key to Dump.

[ninja123]

thats what i did, after remove bsi again, i read eeprom and some data was now all 00 00, dont know why this happened, i just write ori dump and programmed with MVP, I will try again next time, thanks for your help.

ninja

[daniersms]

Sierra thnx for latest updates which includes mod 130 for the Smartforfour --was just in time for me.Here is a photo for the etacs if you need it :smile:

[siyadk]

good job daniersms!!
i have noticed from modules 110 onwards, there is no picture of immo or ecu. so it will be great if everyone can help or contribute to sierra by sending them respective pictures of immo and ecu so that sierra can add them in his next updates

[zyjekrc51]

that's not true - You can't program keys with cable like one from Youtube in case of all keys have been lost - You still ned one key to start programming procedure.
For Your knowledge - You can keep up to 4 keys in Honda bikes ECUs :)

[ninja123]

Autocom can do that

I have autocom now, where is options for programming key for this? Does it appear only when connected to correct car?

Thanks, ninja

[ovidiu1967]

new zed bull free for all!!!!!!!!!!
regards!

[paul_12345]

new zed bull free for all!!!!!!!!!!
regards!

this is very old version that was free

[siyadk]

can someone recommend a supplier , from where can i get good quality zedbull clones??(like old ones)

[allstar]

I want to know too.

[ninja123]

keep dreaming, just mass produced stuff left now - I did have one chinky company make me a t300 with older software, but they charged me good for it :(

Is there not just a simple standalone 4D cloner available anywhere, with no internet or tokens etc??

ninja

[paul_12345]

keep dreaming, just mass produced stuff left now - I did have one chinky company make me a t300 with older software, but they charged me good for it :(

Is there not just a simple standalone 4D cloner available anywhere, with no internet or tokens etc??

ninja


yes trs 5000 clone id4d I think works with 46 box too

Exclusive Agency JMA TRS-5000 Cloning Tool TPX Cloner(Copy 4D) (http://www.uobd2.com/wholesale/jma-trs-5000-tpx-cloning-tool.html)

and 4d / 46 cloner

4D/46 Clone machine (http://www.autokeys.us/product_details.php?category_id=5&item_id=2032)

[isaky]

Yes i need to know how can i buy a zed-bull clone with a good quality,i have got one but i cant write in tpx1 and tpx2, Thanks you all

[ninja123]

no clones write to tpx1, mine will write zed4C chips for 4C, and to EH2 heads too.

ninja

[ninja123]

anyone using this 4D copy tool? Any info?

4D CLONING TOOL (http://www.greebid.com/wholesale/4d-cloning-tool.html)

ninja

[allstar]

Probably is the same as this one
4D EH2 COPY Adapter for AD900 or Clone King : (http://www.go2obd.com/4d-eh2-copy-adapter-for-ad900-or-clone-king-good-902.html)
It is a clone of silca 4D tool.It come with the same silca software( 4 DVDs )

It can work with PC only and can copy into 4D with battery ( it is the same as EH2 )
Can't work with TPX2 ( and TPX1 it is only for 4D ).
I dont know about CN2 chip CN900.

[delek]

can not copy the CN2.

[Faraday]

Great software. I'm looking forward for updates :)

Thanks Sierra.

[siyadk]

I want to personally thank Andrius, who has contributed a lot modules for the effi software(at least 10+ modules to my knowledge). At the same time gepakg, lupu Sandu, automan,idons, evlada and shitad for their selflessness and contributing for locksmith around the world

Great job guys, You are inspiration for many locksmith to contribute more n more. This has made to me feel to contribute at least one module for this this software and my eyes is already searching for a immo system which effi doesnt have right now.

[siyadk]

a small food for thought(for sierra): what will happen to Effi's future if in case china slowly stop producing zedbull clones?? I have heard IEA stopped producing Zedbull.

Sierra any plans for developing a new our own READER??

[lidons]

I can assure you that this software is not causing much grace to some representatives of other firms.

I will not give name, from whom and why. or create controversy for it .. nor Use my words for it.

Take this medium, indicating that in this forum, I have my NICK and recognized locksmith media Hispanic and I do not hide, as did other representatives otherwise. which cost me to know who they are, but ultimately who they are and that nick used. (it used to be watching a different and use our comments on his defense)

A:_ With these words I tell everyone that the Lord SIERRA, not cloning any software,

B:_ He developed software to different KEYman for KEYman with your knowledge and help many KEYman. using an interface that is on the market and sells NO.

C:_ known to get better performance, the aged ZEDBULL.

D:_ that looks nothing like Effi the ZEDBULL software.

E:_ That Effi has an update every week and takes one year ZEDBULL more, no update of modules, only great performance and server change.

you can thank my words and will know for yourself that people I'm talking about in these comments.

Sierra Strength and continues with the project,

[paul_12345]

a small food for thought(for sierra): what will happen to Effi's future if in case china slowly stop producing zedbull clones?? I have heard IEA stopped producing Zedbull.

Sierra any plans for developing a new our own READER??

I think effi uses a lot of backend code from orginal zed bull - all the comms between pc -> zed bull, to code from scratch is a lot bigger task.

Also pretty pointless as china will make it as long as people will buy... they are still selling gambit!

[andrius]

Effi is growing every time, and no matter what china will do effi will survive. :) i think china will make as much zed bulls as much effi users there will be :) look at old devices like ad100 and hitag2 and inpa, or 1.4 VAG commander, they are somewhat dead? but china still has a lot of them? old dead devices? :) so zed bull is long time from being dead :) and Thanks Siyadk :)

[siyadk]

Andrius...We need to thank you for huge contributions!! so proud to have you with us and for sharing ur knowledge for all Effi user

[andrius]

I am not the one you need to thanks :) Sierra is the main creator, author, supporter of the software he is to be thanked :)

[sierra]

andrius, you in any case deserve gratitude :)
As the gratitude mate of badenaleks and lidons deserves.
They always helped me with the program, even at that time when I threw program development :)
It is possible to tell because of these people the program I continued the development :)

[keysph]

found this on e-bay NEW CRACK ZED BULL EFfi 2011 Key Encrypter Programmer | eBay (http://www.ebay.co.uk/itm/221239090636?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649)

[totalkey]

How many models in effi soft?

[mezmerized02]

I get no response from the emails I send to try to purchase this software... Is it still being developed? Is there a version that is not completely updated that is available for testing purposes? Or is it only Full Version with license only?

I have read this entire thread and it seems that the software is better developed than the original ZB software...

[andrius]

yes, effi is better than org zedbull SW in many ways. it can be purchesed from sierra. there is no test version available, all SW has to be registered to be fully functional.

and effi is in development, it is not fully completed, updates come out for it, so new modules added and effi expanded :) so i can not say how many modules are available, or for how many cars, as some immo systems are same through out many models and car manufacturers, if need any more info, please contact Sierra or i can tell anything you need. there is other forum where all effi news is put. :)

[Chokito5]

I would like to clone 4C and 4D 60, 61, 62, 63, 67 and precode PCF7941. Can I do with EFfi, or Can I do it with other tool? Or is it impossible?

[dam495]

cn900 will do it, zed bull china can't clone texas 4d

[autoelek]

How can I generate out.lic ? It's necessary to buy Effi's module but I don't know how to create this file ...

[Chokito5]

Which tool can I precode PCF7941 chips? Zed-bull with Effi?

[neno11]

I think precoding empty PCF7941 or image generator function is only possible by Tango but only for limited type of cars, see description
Scorpio-LK (http://www.scorpio-lk.com/eng_index/)
From my experience you can do it manually by Zed Bull but remote won't work.

If you ask me I would pay Sierra to develop Effi "Image generator" for precoding say Citroen/Peugeot or Opel pcf7941 433MHz

[Chokito5]

I saw the description. It is not cheap :)
I bought one used Remote key for Opel H Astra, and I changed the PCF7941 chip, but now I can't program to the car :(
I searched Hitag manual programing, but I can't find them. I have never done it. Have you got any description for Hitag manual programing?
I think the PCF7941 precoding will be a useful function, need it to develop.

[ninja123]

I would like to see this too, most new keys with 7941 are too expensive :(

ninja

[dam495]

need one information, about effi server , tried to update today and i only got the server is not aviable, is it only me , i think i will sen d a email for sierra

[qwertyuiop12]

Post #89 about effi server
Translation
Yes, at least one month will be updated. Summer, heat, home repair (when all normal people go to vacation:)) shorter, too, did a little vacation:)

EFfI - Second Life for Zed-Bull clone - ???????? 9 - ????? ???? ???! (http://forum.softtyt.ru/showthread.php?t=1160&page=9)

[zygzook]

precode tarnsponder?w to VW is not good for Golf5 checked, but I believe in you, you have your head correct sincerely and respectfully, zygzook, ps. corrected for evo

[sasa5]

Hello guys.
I use the Efi Siiere.
I have a problem, I made a new chip from 46 dump UHC 95040 Reno Logan 2010. But would not start.
He recognized the damp, given the option to enroll in 7936, asked for a new key or deleting old, I was confirmed in new.
Program registration is done. But it will not start the car.
I use Zedd Bull clone

[gwee]

I started many cars and bikes with effi. Great software!!

A big thank you to Sierra and Andrius.

[tas_daz]

for renault clio id 46 you have found anythink.i try in 2 clio and nothink.dump from uch .the cars is in greece.dont work why?

[mvtamele]

honda cbr 1000 key lost
i dont have honda menu in my tang becouse i got full EFFI
can you test if my EFFI did it nice?
becouse there is 2 otpions
1-Key to Dump
2-Transponder Programming

[dam495]

what is the problem?first you put transponder addand second you put key to dumpand third you record the new dump and test, if don't work you put the original dump, and call another locksmith and share with him the money, simple. it's always work. after this you email sierra and said what you was doing, the model ecu, imo, dash, the dumps , that you was working, all them, and wait and sierra fix what was wrong,

[andrius]

key to dump puts key in dump, transponder programing makes dump virgin and self programing :)

[ngakson2002]

Hello Mate,

Can someone tell me which of the following transponders are successfully generated and working well when using the EFfi Transponder image generator function.

Toyota 4D 67,68 and 70 from Texas crypto Id 4D60

Nissan 4D 41

Mercedes E,C and G class Master key from Blank PCF7935As

Ford ID 63 from Texas crypto Id 4D60

Peugeot ID 45 from Blank PCF7935As

Mitsubishi Carisma ID 44 from Blank PCF7935As

Renault, Honda, Peugeot, Hyundai, etc.. ID 46 Locked from PCF7936

Best regards

[Becoacamba]

hi Sierra, i have problems with the sofrware EFfi, I can`t use it, sorry to write you this way, but I've already written three mail and 1 MP by DK, and I have not heard from you, thanks

[andrius]

try reinstalling and updating your effi. :) file protection is on. maybe a bad sector on hdd? :)

[Becoacamba]

try reinstalling and updating your effi. :) file protection is on. maybe a bad sector on hdd? :)

THANKS, i reinstall it, but always says same error, I could try to install it on another pc?

[andrius]

if you install on other pc, will need to ask new license. when the program stoped working? did you install any new apps?

[912secured]

Anyone have a list of the newest over 99 or 100?

[Dimoni]

The new version is already above 130 modules ... I think ...

[andy99]

135 modules:top:

[mezmerized02]

What do we need to send in to help get modules added.

Dump before keys added and after keys added. Need to know crypto key?

Would love to see Volvo CEM and CIM included.

Possibly Saab TWICE and CIM

Have tons of dumps. Just wondering how to help..

[szkeptmen]

Ask Sierra, for example :)

[nokwueze]

till date the software open well in my computer
will the problem becuase am using mini zed bull
it can not program any key

[andrius]

info needed to include in EFfI are dumps, before, after, and all posible info, like full key info. :) if it is id46, then crypto and tmcf data. :) as if we have dump, but do not have key info, we do not know anything, like were the key info is in dump . :) so need full info. :) and will try to add i hope :)

[gwee]

Let's all start to contribute dumps and key data and make effi a super tools :)

[mezmerized02]

That is my plan Gwee!!

[mezmerized02]

We can all learn a lot by posting the dumps and the key locations!! Especially on id46 learning about the crypto key and why it's important!!

[912secured]

If you do not care about the menu he could get it to work on the ad90/ any thing that uses zed-qx software. Would work with 900pro,ad90,CAR Key Clone King Can get clones for less than 70 bucks. The flash to the early 3.X was being sold for 75 bucks. Everything is in the clear commands are easy, works with hitag and 48. Early ad90 firmware Did not work with 8e or 8c(one of them).

TRANSPONDER PRO KEY COPIER (http://www.ecutool.com/TRANSPONDER-PRO-KEY-COPIER_126.html#4)

[socrates66]

This is my first cloner purchased in 2008, she paid many current machines. I have a great affection, purchased in ecutool!!!
I could never get the software, thanks for link.

[andrius]

912secured (motorola)->
how good does it work with DST and DST+ chips? :) any more usfull functions inclooded? what are + and - in comparason with zed -bull? :)

[912secured]

It works fine on 4c ad90, the others do 4d fine.

[gwee]

About to order MUT3 to add key for 2013 Mitsubishi Montero, but job done using effi module 95 :)

[ninja123]

is there solution for fiat 500 keys? I need to make spare keys and lost keys for 3 of this car.

ninja

[mezmerized02]

is there solution for fiat 500 keys? I need to make spare keys and lost keys for 3 of this car.

ninja

ID 46 500?

Wish I knew the crypto key. Make lots of money here myself.


Sent from my iPhone using Tapatalk 2

[ninja123]

Yes, fiat 500 giving me trouble now, what tool can make a key for this car? Any chance of a new effi module for this car?

Ninja

[paul_12345]

Yes, fiat 500 giving me trouble now, what tool can make a key for this car? Any chance of a new effi module for this car?

Ninja

tmpro module 59

[smokey08]

Sierra, is it you selling your software on eBay?

[ninja123]

I dont think sierra is selling on ebay, this is cracked software, just pay your $200 to him and you will be happy, many updates and will serve you well.

ninja

[ninja123]

tmpro module 59

any chance of 'before and after' dumps? so we can incorp this into effi software?

ninja

[paul_12345]

any chance of 'before and after' dumps? so we can incorp this into effi software?

ninja

I not got it, but I doubt it will be that simple with id46

[ninja123]

effi has many id46 modules, if the before and after files are given to sierra then he can do this.

ninja

[immomaniac]

I have registered Effi with my desktop. I need to install to laptop using same zedbull hardware. So if i copy same out.lic and lic.lic from desktop to laptop, Will it work and be registered??

will it work... ?? Sierra

[paul_12345]

I have registered Effi with my desktop. I need to install to laptop using same zedbull hardware. So if i copy same out.lic and lic.lic from desktop to laptop, Will it work and be registered??

will it work... ?? Sierra

why dont you just try it?

although pretty sure its locked to one pc

[paul_12345]

.................

[gwee]

I have registered Effi with my desktop. I need to install to laptop using same zedbull hardware. So if i copy same out.lic and lic.lic from desktop to laptop, Will it work and be registered??

will it work... ?? Sierra

It will never work :)

If it work like this, everyone will have a copy of effi :)

[paul_12345]

It will never work :)

If it work like this, everyone will have a copy of effi :)

not if its locked to the zedbull serial

[gwee]

Effi i think can use with any zedbull, but is locked to only one pc :)

Most clone zedbull have the same serial if is from the same manufactuer, i think :)

[whiskeyman]

just a quick one
is it just me or can anyone make a tpx1 chip from a toyota dump file
chinky zed fails
only works with eh2 head

[ninja123]

EFfi is registered using pc AND zedbull serial numbers, my big old zedbull is faulty so i buy mini zedbull but not working on same pc with EFfi.

Copy zedbull not working with tpx1, buy some Z4c chips, cheaper than tpx1 and work great with clone zedbull :)

ninja

[ngakson2002]

Hello mate,
I just got my Mini Zedbull with the intention to buy the EFfi software.But having intalled the software and drivers, i have noticed the Zedbull does not respond well with the PC.In fact following action on refresh and Connect buttons, when trying to use any screen Menu such as Reading transponder it will take a long time to comunicate with the hardware and as result will display a dialogue box Device not Responding.and when and insist, Message No token loaded in the device.
However at times it connect perfectly.
This explained need help in having the SOFTWARE and Drivers for the Version 5.02 to install.

Best Regards

[nicocr]

my chinese fail too. but press the button key to dump and putt a toyota chip, save the dump and load to eproom

[koncimobil]

Any body have test EFfi to make new key BMW CAS2 with PCF7945 ?
And new remote will working?

[gttuning]

Hi sierra can u explane to me what im doing wrong tryin to up load file in to new megan card(not sure if precode for central locking),file is virgin from other card precoded from one of the DK man.image 2 and image 3 is different after wrighting page 3 -4-5-6-and7. may be is normal but im not sure.thanks

[Becoacamba]

I dont think sierra is selling on ebay, this is cracked software, just pay your $200 to him and you will be happy, many updates and will serve you well.

ninja

i pay him 200 usd, and i can,t update the software, does not answer my messages, not a person that would be trusted our money.

[sierra]

i pay him 200 usd, and i can,t update the software, does not answer my messages, not a person that would be trusted our money.
Give on in more detail when you paid and what yours e-mail?

[dam495]

hi guys what is the module for kia cerato 2009/have a custormer who wants a copy, and he is far way, is sbb able for this by obd port,

[bram380]

I think Sierra read this post:

http://www.digital-kaos.co.uk/forums/newreply.php?do=newreply&p=2054356

[sierra]

I think Sierra read this post:

http://www.digital-kaos.co.uk/forums/newreply.php?do=newreply&p=2054356
I don't know as to make that remote would work.

[isaky]

Where i can to buy z4c,pls????
Thank you

[dam495]

hey guys how about kia cerato information for copy a new key

[foxtec800]

sierra can you give me email to order effi , sent to email from other forum and no response.
effi work with oe zedbull alongside oe software? or must be seperate installations

[sierra]

What is OE Zed-bull?

[foxtec800]

Original , not clone :)

[ninja123]

Where i can to buy z4c,pls????
Thank you

3D Group - Automotive Locksmith Supplies (http://www.3dgroupuk.com)

ninja

[ninja123]

Original , not clone :)

Not sure it will work with ori zedbull, but works great with clone's.

ninja

[ninja123]

After i used EFfi yesterday, it said 'cancelled' at the bottom by where it normally says 'registered', SIERRA, will I have problem with this when I want to use next time?

ninja

[sierra]

'cancelled' isn't related to registration.
Simply likely you wanted to write down a transponder but then cancelled.

foxtec800 I wrote to you that EFfI works only with a clone.

[Becoacamba]

Give on in more detail when you paid and what yours e-mail?

ok finally.

213619213620213621

[sierra]

It isn't necessary to lie.
You bought for $100 / KZT 15.322,30
http://s019.radikal.ru/i619/1308/4c/c5abd0a33858.jpg

It was long ago, there was a lot of time that would will be updated to the new version.
I don't know than you were occupied till this time. But all users who wanted, without problems was updated.
Now at whom the old version, will be updated not probably.

[INJECTMDS]

Hello Friends! Possible unlock software zed-bull?

[gwee]

Hello Friends! Possible unlock software zed-bull?

yes, very easy to unlock :eviltongue:

we are all locksmith here:devil:

[INJECTMDS]

Hello Friends! Possible unlock software zed-bull?


yes, very easy to unlock :eviltongue:

we are all locksmith here:devil:

I want to buy software released zed-bull friend, new version ! :stoned::stoned::stoned:

[qwertyuiop12]

Buy software :top:
EFfI - Second Life for Zed-Bull clone - ????? ???? ???! (http://forum.softtyt.ru/showthread.php?t=1160)

[Becoacamba]

It isn't necessary to lie.
You bought for $100 / KZT 15.322,30
http://s019.radikal.ru/i619/1308/4c/c5abd0a33858.jpg

It was long ago, there was a lot of time that would will be updated to the new version.
I don't know than you were occupied till this time. But all users who wanted, without problems was updated.
Now at whom the old version, will be updated not probably.

sorry yes i had to lies for you can reply, what i have to do for update the software?

[sierra]

sorry yes i had to lies for you can reply, what i have to do for update the software?
Write to me on an email.
Next time I don't need to write on such questions when I am in holiday.

[immomaniac]

Can effi unlock megamos 48 magicII transponder?

[mvtamele]

in the effi updates i see that effi can do rx330 but i tried this one and refused i got tango but i prefer to use effi soft from sierra becouse it use TPX2 chips please sierra update this one i dont want to buy TMPRO cause of this
i can pay extra i goty original EFFI but i can pay extra
seriously whay you dont charge in 6 to 6 months for the soft becouse its great and cheap
sorry for my english
]

[tronicoblue]

Hello

Sorry about my english, and if I wrote this question not to the right topic, but I'v found not better for it.

My question is: It's possible to precode a "Special blank transponder chip (46) (PCF7936)
For use with Zed-Bull. Programmes to suit Philips Crypto 46 chip id" for a Fiat Doblo '2008' from an original key? Or is any method to find out the code to precode procedure? (I will not to take out the chip from the BCM module)

Thank you in advance for the answers!

tronicoblue

[Bllinda]

for Sierra SAAB 9-3 & 9-5 dumps, key & pin code address:
Hello, bram380

Can I find out password of this file?

http://www.digital-kaos.co.uk/forums/attachments/f177/164858d1356402793-zed-bull-clone-second-life-saab-9-3-9-5-_-dumps-key-address.rar

I did SAAB'99 95 and could not laced tranponderio ID20-T5.
Now looking atsakimo. Why this has happened ... Thank you.

[andrius]

Blinda, contact me please, maybe i will be able to help you. :) "Ir pasakyk is kurio miesto esi " :)

[kamel2003]

Please send me pass sierra!!!!!!

[oknid]

Hello to all!!
I did Fiat Ducato today, 2008MY.
Read eeprom 95c160 and EFfi recognized dump ok (MODULE 14), and give pin code.

I realized that I cannot add key with SBB (clone SBB works with Ducato till 2005/6) and I tried with adding key to dump.
Then I put 48 chip in Zed bull and clicked Transponder programming button.
Next step was Key to Dump button. With 48 chip still in Zed bull antenna I clicked Add key button. Popup window shows "Key 3 added". Then I saved new dump and reload it to eeprom and refit all to the car.
When I tried keys NOTHING WORKS. I couldn't start the engine with original key or with new key!!
Then I restored the whole situation (reload original dump, etc.) and successfully started the car withoriginal key.
I tried whole procedure once again but without success!!
Did I do something wrong orin MODULE 14 "Key to Dump" option not working?


I am attaching original dump and "Key 3 added" dump

Thanks for any advice, Oknid. 218916 218917

[ninja123]

I had the same problem with this van, EFfi makes transponder ok from dump, but is not working when you use 'add key to dump', just pre code transponder with EFfi and program via obd with pincode from EFfi.

AD100 pro, MVP pro, and Autocom can do this.

ninja

[ninja123]

I think sierra should hold back on a few good modules, then release a payable update, ie for saab and toyota 4D, fiat 500 etc etc

I think there will be a good take up on this.

ninja

[sierra]

Hello to all!!
I did Fiat Ducato today, 2008MY.
Read eeprom 95c160 and EFfi recognized dump ok (MODULE 14), and give pin code.

I realized that I cannot add key with SBB (clone SBB works with Ducato till 2005/6) and I tried with adding key to dump.
Then I put 48 chip in Zed bull and clicked Transponder programming button.
Next step was Key to Dump button. With 48 chip still in Zed bull antenna I clicked Add key button. Popup window shows "Key 3 added". Then I saved new dump and reload it to eeprom and refit all to the car.
When I tried keys NOTHING WORKS. I couldn't start the engine with original key or with new key!!
Then I restored the whole situation (reload original dump, etc.) and successfully started the car withoriginal key.
I tried whole procedure once again but without success!!
Did I do something wrong orin MODULE 14 "Key to Dump" option not working?


I am attaching original dump and "Key 3 added" dump

Thanks for any advice, Oknid. 218916 218917

It is corrected.
Update the program.

[ninja123]

sierra, you not reply to my email, so i understand that i will have to buy new licence now???? or is there a way i can change serial number in zedbull so licence will still work???

Im not abusing your software mate - I got robbed :(

ninja

[marek_kwk]

I did today Ducato 95160 with crypto48. EFfi was calculated bad checksum in file. I had to count manually.

[oknid]

I did today Ducato 95160 with crypto48. EFfi was calculated bad checksum in file. I had to count manually.
Hi marek, have you done this before of after updatig EFfi?

[marek_kwk]

Yes. In 95160 is checksum repeated 2 times.
I did it before updating EFfi.

[oknid]

Yes. In 95160 is checksum repeated 2 times.
I did it before updating EFfi.
Hopefully that means that after Sierra's correction should be all OK. I've already made arrangements with a colleague who has ad100pro to help me tomorrow, but if the customer will have the time, I will try key to dump option.

[sierra]

sierra, you not reply to my email, so i understand that i will have to buy new licence now???? or is there a way i can change serial number in zedbull so licence will still work???

Im not abusing your software mate - I got robbed :(

ninja
I don't remember what you wrote. Write to me once again.

[sierra]

I did today Ducato 95160 with crypto48. EFfi was calculated bad checksum in file. I had to count manually.
The module 14 supports some options of dumps.
One of options not correctly counted checksum.
It is already corrected.

[oknid]

It is corrected.
Update the program.

Hello Sierra,
I made new dump AFTER updating EFfi and compare it with dump made BEFORE updating and dumps are exactly the SAME?
Should it be OK?

[blacklisted]

@ sierra

reading through the forum and saw this post

genuine reason for ninja m8

http://www.digital-kaos.co.uk/forums/f177/my-van-has-been-robbed-358740/

[sierra]

Hopefully that means that after Sierra's correction should be all OK. I've already made arrangements with a colleague who has ad100pro to help me tomorrow, but if the customer will have the time, I will try key to dump option.
To see badly I checked.
All right, I will slightly be released I will correct.
Check the personal message, I will give you the ducato95c160_new.bin corrected a dump

[antibisic]

One question please does Sierra soft make precode blank id 48 with component security for newer vw audi if you have cs?Thanks

[ninja123]

no, well, not yet.

ninja

[kerekt]

Dear Sierra!

VAG CAN BUS ID48 precode lost from Image Generator. Can u repair it ?

regards

Tod

[antibisic]

no, well, not yet.

ninja


with tp23 can not too?

[912secured]

Original ad900 does not use their own 4d/46 cloner servers. They refer you to to original maker of clone chip for it. Any one could add that if you had internet.

[mvtamele]

Siera please check toyota 4D i dont want to buy tmpro only for this cars
and you must charge for some updates as we are making money
sorry for my english

[sierra]

Siera please check toyota 4D i dont want to buy tmpro only for this carsand you must charge for some updates as we are making moneysorry for my englishWhat problem with Toyota 4D? Everything works normally.

[ninja123]

What problem with Toyota 4D? Everything works normally.

our friend refers to adding more modules for 4D systems, and also that you need to charge for good updates, as we are all making money from your continued work, when you are working for free.

loke i said to you before, hold back untill you have some new usefull modules, then make a payable update.

usefull modules would be:-

Toyota aygo/ peugeot 107/ C1
fiat 500
MAN trucks
SAAB cim system
All toyota 4D systems

ninja

[marek_kwk]

This is file with corrected checksum for "oknid".
(http://www.digital-kaos.co.uk/forums/members/62294-oknid/)

[mvtamele]

What problem with Toyota 4D? Everything works normally.
CAN EFFI do lexus rx300 with 4D ID68?

[ninja123]

not yet

ninja

[sierra]

CAN EFFI do lexus rx300 with 4D ID68?
Be updated and check.

[badenaleks]

Sierra Thanks for the update!

[mvtamele]

Be updated and check.

I WILL TEST AND LET YOU KNOW BOSS AND IF IT WORKS ALLELUAHH

[ninja123]

take some photo's for sierra to add to this module!!!

ninja

[bochen]

Sierra could you update what's new.txt file? There were three updates and we do not know what is added. Thanks.

[isaky]

is possible to generate a chip for this dump of fiat multipla