Zed-Bull clone - Second Life

[sierra]

New versions will not.

[sierra]

In the 508 version does not work module 20. I corrected the one who wants to download and enjoy :)

http://s019.radikal.ru/i618/1205/f0/c471460c5f53t.jpg (http://radikal.ru/F/s019.radikal.ru/i618/1205/f0/c471460c5f53.png.html)

[andrius]

it's very interesting software could you share it? :) many thanks :)

[sierra]

andrius, I also interesting to look at other people's creations :)

[andrius]

some layout :) 125265

Not bad siera :D respect :)

[sierra]

Does anyone have any old versions of software? After 5.08 and up to 7.28?

[paul_12345]

Does anyone have any old versions of software? After 5.08 and up to 7.28?

7.01
Zed-BULL Setup v701.rar - 4shared.com
(http://www.4shared.com/rar/wwYUvawV/Zed-BULL_Setup_v701.html)

[sierra]

Please test the program with a clone of Zed-Bull.
You need to copy a file from transponder.mdb Zed-Bull in a folder with EFfI.

Video - EFfI_HII.wmv - YouTube (http://youtu.be/eAA0-gGiywc)
Program - http://www.fayloobmennik.net/1955010

[sierra]

In your private messages arrive issues, this program is better or worse than the ZED-Bull.
It has the same capabilities as the ZED-Bull.
I just did what would have been several attempts at reading and writing.
I have laid out a program for what would have tested how the connection between the program and ZED-Bull.
If all goes well, then ....
To be continued ... :)

[chrismoore02]

looks good, will anyone be able to get the clone zed-bull working with ver7 software?

[sierra]

looks good, will anyone be able to get the clone zed-bull working with ver7 software?

No, the ZED-bull clone will not work with software version higher than 508.
But who had time to watch the video in my first post, probably realized that there is much more interesting than the version 7.01 :)

[andrius]

there is much more interesting thing in the version, that you have posted in the first post :) zed bull is only an antena, the software is much more needed ofcourse. :) you can make it read, write and unlock much more transponders using the rfid readers, zed-bull is not in an exeption :) good work Sierra :)

[Meat-Head]

7.01
Zed-BULL Setup v701.rar - 4shared.com
(http://www.4shared.com/rar/wwYUvawV/Zed-BULL_Setup_v701.html)

Could you reupload to rapidsahre or something, need to sign up to leech it - got more than enough website, passwords and junk emails as it is.

Thanks



Please test the program with a clone of Zed-Bull.
You need to copy a file from transponder.mdb Zed-Bull in a folder with EFfI.

Video - EFfI_HII.wmv - YouTube (http://youtu.be/eAA0-gGiywc)
Program - http://www.fayloobmennik.net/1955010


Can you upload to here, same again, get no of junk emails.

*CONFUSED* is this making locked transponders reuseable?


Thanks

[sierra]

Can you upload to here, same again, get no of junk emails.
Just click on it.

[chrismoore02]

Meat just pretend to sign up with fake email name and password. Then it starts the download :rolleyes:

Sent from my Galaxy Nexus using Tapatalk 2

[sierra]

e-mail only if you want to write your comments to the file.
I never even paid any attention to it, just noticed :)

[Pzolee]

I can not download....
please rapidshare or digital kaos forum upload.....

[sierra]

To download on rapidshare need to register, I have no desire.
From here, try, if you do not get what would you ask someone re upload.
http://zalil.ru/33407353

[damih]

Here if you want all credit for SIERRA

[andrius]

one more interesting software from kms :) DEMO only :)
125685 enjoy :) still looking for the SW from first post :) as identifieng 4D70 for me is important, and automaticaly it is much easier than by hand for me :) thank sierra. :)

[lupu_sandu]

Just tested ZedBull and EFfi with a new Logan key (7946).
ZedBull can read all pages (ISK Hi/LO, Config, remote etc) EFfi just Ident. No other data can be readed.

[sierra]

Just tested ZedBull and EFfi with a new Logan key (7946).
ZedBull can read all pages (ISK Hi/LO, Config, remote etc) EFfi just Ident. No other data can be readed.

Thanks for the post :)
Reading and writing Hitag 2, I started doing not long ago, there certainly will be wrong.
I tested only on pcf7936.
I will check in what may be a bug.

[sierra]

I looked at the screenshot, the ZED-bull set Crypto Mode and EffI Password mode.
Try to choose the same EFfI Crypto Mode. These options, while not active, but they are important.
If you still can not be read, then I'll see what the reason.

[sierra]

andrius
Yes, I have long laid out this program on another forum :)

[sierra]

Fixed some bugs (can be added new :))
Make reading the Remote to pcf7942/44/46
Make - when you choose what would pcf7942/44/46 Crypto Mode is automatically selected.

http://img339.imageshack.us/img339/8871/20120608132356.png

[sierra]

Who knows, zed-bulls can write 4D in JMA TPX2, Silca EH2 emulators?
Not to clone, and it is simple to write data.

[andrius]

could you please post the software in image :D

[skyneter]

sierra how can we add image generator and pin code & key maker tabs it is something we have to change in zed bull folder

[paul_12345]

sierra how can we add image generator and pin code & key maker tabs it is something we have to change in zed bull folder

no, decompile the .exe learn what parts of the code do what and change

[sierra]

Sorry. I made a screenshot from other program.

[PierreTheron]

I have made 4c data to eh2 and works on clone .

Have made 4D70 to tpx2 and is working with clone zed.

(But i thought everybody knows how to do this with clone Zed)

[skyneter]

I have made 4c data to eh2 and works on clone .

Have made 4D70 to tpx2 and is working with clone zed.

(But i thought everybody knows how to do this with clone Zed)

for 4C it IS OK but for 4d70 with clone it is not known :stupido2:

[lurossi]

hi, excellent post, I saw your video and I thought to ask if it works to unlock remote control id 46 in psa group? through time I have accumulated several of these that were miscoded and would be very nice to put them to work again, I would like to know your thoughts. if what I'm asking is stupid, I apologize, just when I see a person like you who share their skills here, openly only makes me wonder, hope the automatic translator does not change the words in my original language. regards

[PierreTheron]

for 4C it IS OK but for 4d70 with clone it is not known :stupido2:

If you have the 4D70 key data and the secret key data you can input it manually and make to tpx2 ( just make certain that all data is written correctly to the tpx2 before you lock it )

PG 1 32
PG 2 35
PG 3 71 44 46 16
PG 4 BDFBD31735

[PierreTheron]

sierra how can we add image generator and pin code & key maker tabs it is something we have to change in zed bull folder

Would like to have the full software .
From where can i buy this???

[sierra]

Would like to have the full software .
From where can i buy this???

I already answered in personal messages much. I will answer once again for all.
I don't sell the program. When the program which I already laid out will be tested, I will spread the program with new possibilities.
Agree, what sense to have the full version with all makers if she badly writes down and read transponder. :)

[automan123]

Wonder how u can laid it out or make it better as i know all clone used a cheap components and its firm/soft ware was unstable......by the way do you have datasheet for pcf7991at abic ic used in zb clone? (i only got that 2 pages pdf)

[isaky]

your can precoding a chip with this dump????
thank you
P:D i have a zed bull clone 5.0 with 5.8 soft

[sierra]

your can precoding a chip with this dump????
thank you
P:D i have a zed bull clone 5.0 with 5.8 soft

Zed-Bull the clone of version 5.08 can work with this dump.
Certainly and my program can :)
EFfI_18.wmv - YouTube

[thiburco]

if I have the current version of the file "transponder.mdb" I can use all the features of the original zed-bull? tpx1, and tpx2 tpx3?

[sierra]

The file transponder.mdb doesn't add any possibilities, it is intended for display what transponder are applied in a car.

http://img69.imageshack.us/img69/4566/20120620190351.png

[chrismoore02]

Sierra your software is looking good when will you be releasing the full version.

:D:thumbup:

Sent from my Galaxy Nexus using Tapatalk 2

[paul_12345]

few suggestions;

transponder production - I'm sure theres enough people here that can PM some help. Would be good to get vauxhall pcf7936 precoded which I believe the miraclone does.

Also on fiat id46 system would be good to enable 'create image file' as the original I believe still needs coding after. I know someone here has wrote they write the key bytes in manually.

[sierra]

To add new possibilities it it is good :)
But I first of all want to correct mistakes in that that already made.
Now some people from different forums check the program.

[sierra]

paul_12345, if you want to take part in program testing, write to me to PM
In the program likely there are a lot of mistakes, I can't check everything.

[abadcinho]

Dear Sierra
Congratulations You are doing a good job
I wondered If I can test your software on original zedbull I m new in cloning and programming keys and I would like to know the procedure on zedbull software to make pcf7936s reusable because I have some Pcf7936 locked I tried reading in crypto and password mode but it can't read all pages then I tried with unlock Pcf and it read all pages in password mode.
Thanks in advance

[sierra]

Dear Sierra
Congratulations You are doing a good job
I wondered If I can test your software on original zedbull I m new in cloning and programming keys and I would like to know the procedure on zedbull software to make pcf7936s reusable because I have some Pcf7936 locked I tried reading in crypto and password mode but it can't read all pages then I tried with unlock Pcf and it read all pages in password mode.
Thanks in advance

My program won't work with original Zed-bull.
I not absolutely understood, you did unlock pcf7936 with original Zed-bull?

[abadcinho]

No I can't unlock. I would like to know the procedure please help me.
Regards

[sierra]

I don't know as unlock pcf7936
If you wrote down it a transponder and now want it to unblock, give the dump on which you did a transponder, I will try to help.

[ninja123]

I think this is great!
I have clone zed and will gladley test your software on everyones car!!

I think you need to market this, for free is not good, when you have obviously spent a long time researching .

PM me, ninja

[pkeeney]

I think this is great!
I have clone zed and will gladley test your software on everyones car!!

I think you need to market this, for free is not good, when you have obviously spent a long time researching .

PM me, ninja
I would ask for donations to keep project alive.

[Meat-Head]

I would ask for donations to keep project alive.


well make sure DK gets at least 99% of them donations.

[kenancatli]

I have clone zed bull where I can download this software
PM please
Best Regards

[sierra]

Hi.
Here are the promised program EFfI.
For the password contact the PM.
There is no more time dealing with it, but if there are mistakes, I will try to correct them.

[daniersms]

Amazing this is an excelent prog

[chrismoore02]

Software looks great sierra!!!! :D Well done, the demos looked good but this is all rolled into 1 software now, fantastic, im sure im not the only one happy!

[electromech]

Mine keeps saying that the file is corrupt or password incorrect...anyone have fix to this....and I have confirmed that the password is correct?

[sierra]

I want to say a big thank you to those who helped test the program ;):beerglass:

[sierra]

If anyone does not fit your password, see which version of WinRar.
Should not be lower than in the screenshot.

http://img40.imageshack.us/img40/6498/20120902001607.png

[elchip]

Hi.
Here are the promised program EFfI.
For the password contact the PM.
There is no more time dealing with it, but if there are mistakes, I will try to correct them.

Your SW is very good and have a minimum bug's ...

U maked a good SW

[mecadriano]

I'm sure your very good work for all, I am not expert, but I use my zed clone every day, I can collaborate with m tests
pass please,

[daniersms]

Thnx for this soft I used it today and it works well....wish there was away to clone the TPX1 with the zed

[shitad]

Good work, we all want to say a big thank you.

The only glitch I see so far is whenever I try to load MiniCooper I get error the first time, then the module picture and info does not show.

Keep up the good work.

Regards

[sierra]

Good work, we all want to say a big thank you.

The only glitch I see so far is whenever I try to load MiniCooper I get error the first time, then the module picture and info does not show.

Keep up the good work.

Regards

Yes, now checked, I also have the same error when I select MiniCooper.
Thanks for the message, the error is corrected.

[sierra]

In the original Zed-Bull does not work MiniCooper :(
The next time I just remove it from the list.

http://img846.imageshack.us/img846/1923/20120902210021.png

[verica]

siera please pass for file

[lupu_sandu]

sierra (http://www.digital-kaos.co.uk/forums/members/119881-sierra/):
If you implement production of TPxx transponders will be great.
Also for bikes that i sent you.

[sasa5]

Please pass.
Thanks

[triak88]

Please pass

Thanks

[oep]

Congratulations! Excellent work!

One question for anybody, ews4 moule works?

[Fallen]

My hat is off to you, good sir!

[Iggie]

PCF7935 clear function does not work!

[koncimobil]

Not all used pcf7935 can not erase, because address 0x07 locked.

Pcf7935 as id44 can erase correctly.

[Iggie]

Not all used pcf7935 can not erase, because address 0x07 locked.

Pcf7935 as id44 can erase correctly.

I know that. The problem here is that software always giving message - successfull but it does not clear nor write anything. Check the attachment.

[Iggie]

I know that. The problem here is that software always giving message - successfull but it does not clear nor write anything. Check the attachment.

3 more screenshoots...

[sierra]

Clear function I did because I buy PCF7935 already written (but not locked by password), just before use, I wash it first.


The problem here is that software always giving message - successfull...
This is because in the Zed-Bull version 5.02 does not provide an error return in case if you can not erase.
The easiest way to check is to read it again and see a clean transponder or not :)

Iggie, screenshots are too small, I could not understand them :) Better upload them to some sort of hosting, for example - ImageShack? - Online Photo and Video Hosting (http://imageshack.us/)

[Iggie]

Clear function I did because I buy PCF7935 already written (but not locked by password), just before use, I wash it first.


This is because in the Zed-Bull version 5.02 does not provide an error return in case if you can not erase.
The easiest way to check is to read it again and see a clean transponder or not :)

Iggie, screenshots are too small, I could not understand them :) Better upload them to some sort of hosting, for example - ImageShack? - Online Photo and Video Hosting (http://imageshack.us/)

Thank you for your answer!

[sierra]

EFfI PCF Clr - YouTube

[datapage]

please password sierra.
tanks

[shitad]

In the original Zed-Bull does not work MiniCooper :(
The next time I just remove it from the list.

http://img846.imageshack.us/img846/1923/20120902210021.png

I just tested this once more, If you choose the module (#68) instead of choosing Mini Cooper frist it comes up ok so it might not be necessary to remove this module in your future update.
Maybe this is slight glitch that you can fix.

Regards.

[sierra]

I just tested this once more, If you choose the module (#68) instead of choosing Mini Cooper frist it comes up ok so it might not be necessary to remove this module in your future update.
Maybe this is slight glitch that you can fix.

Regards.
Ok, thanks :)

[jaelgti]

thanks sierra
password please.
I say that you can buy the machine siti, I'm very interested.

[ecutoool]

Sierra friend please password

and thankssssssssssss

[sierra]

Password request to PM.

[sierra]

Friends, do not ask questions about the program in the PM.
All questions and discussion of the program, please contact us here, even if I do not answer, then somebody else will answer.

[Gery]

Pass please Sierra

THX

[elephantul]

thanks to sierra, today i tested module 41. peugeot motorbike and make transponder good, clone zedbull have bug in this module and dont work, thanks again for soft , i verifi and another modules

[Iggie]

Sierra, are you able to assembly new modules into your software? I am asking because I can help you about some transponder logic algo...

[sierra]

At the moment I have no time to program. But if there be any information, send later add.

[eeze]

Hi.
Here are the promised program EFfI.
For the password contact the PM.
There is no more time dealing with it, but if there are mistakes, I will try to correct them.
i just wanted to say that sierra has obviously spent a great deal of time creating this software, and i noticed that it has been downloaded 156 times but only 42 people have said thank you to him and pressed the thank you button, something wrong there, i think to many people simply want want and want but do not appreciate the effort that some people put in. thanks again sierra.

[bochen]

Hi, can I have the pass, please. Thanks.

[badenaleks]

Hi Sierra Please password for the archive. Thank you in advance

[Iggie]

i just wanted to say that sierra has obviously spent a great deal of time creating this software, and i noticed that it has been downloaded 156 times but only 42 people have said thank you to him and pressed the thank you button, something wrong there, i think to many people simply want want and want but do not appreciate the effort that some people put in. thanks again sierra.

You seems to be very suprised? What did you expect? That is happenning every day... Nothing new... Nothing unusual...

[Audi SP]

Hi.
Here are the promised program EFfI.
For the password contact the PM.
There is no more time dealing with it, but if there are mistakes, I will try to correct them.

password please..?
thanks

[Audi SP]

Hello, I would like to know how to figure out which chip is necessary on various car .. such as Fiat, Alfaromeo etc. ... and where you can buy good chips?

[sierra]

I just tested this once more, If you choose the module (#68) instead of choosing Mini Cooper frist it comes up ok so it might not be necessary to remove this module in your future update.
Maybe this is slight glitch that you can fix.

Regards.
Done :)
The password is the same.

[sierra]

Hello, I would like to know how to figure out which chip is necessary on various car .. such as Fiat, Alfaromeo etc. ...

http://img834.imageshack.us/img834/425/20120905171004.png

[Gery]

pass please

thx

[Audi SP]

where you can buy chips at a good price? could you tell me some site?

thanks guys

[Audi SP]

http://img834.imageshack.us/img834/425/20120905171004.png

thank you very much ... but the pass I do not know ... I'm sorry but could you give it to me

[sierra]

With some modules it is not clear how to work :)
Spread the help file for Zed-Bull, with it will be more clear.
If anyone has a newer version, then I will be very grateful.

[maligno]

great work Sierra
send me pass please

[sasa5]

Please pass

[elektro128]

+???
pass please

[DUCADOS]

good work
pass please

[sierra]

In Module 3 was a error. Fixed.

[tas_daz]

my friend i have a clio key with id46 inside 7946at chip.the doors work.the immo don t work .the antena is cut maybe.where i can find antena or how i can clone the chip only for immo?i can with zed bull clone.and if it help i have new key from 3dgroup not used,new and how i can read it to send the virgin file?if want anybody to have it?thanks

[neno11]

The coil is hard to find as I know. Options are:
1. Premo :: Online shop (http://www.grupopremo.com/in/shop/) -must know value in mH
2. replace the coil from the same used remote or any other remote who uses PCF7946
3. order new PCB from Shenzen for about 20 usd

[puiu]

Can you give me the pass please,
thanks,

Puiu

[kevfield]

Pass please :)

[chinhi]

Thanks sierra
Pass Please

[uberbit]

sierra m8, could you please PM the password.
Thanks in advance :beer:

[sierra]

I have often said, who needs a password, send me a private message.

[chrismoore02]

People obviously can't read

[pitbul]

Sierra pass pls.:bounce:

[sierra]

Fixed some bugs.
Those who want to download the first time, you must first download the archive at this link - http://www.digital-kaos.co.uk/forums/f177/zed-bull-clone-second-life-274682/index4.html#post1681347

[kuzmichh]

Module 96 for Chevrolet Aveo not work, and 87 for Hyundai does not work too.
Or it will be supported in future?

[sierra]

Module 96 for Chevrolet Aveo not work, and 87 for Hyundai does not work too.
Or it will be supported in future?

What is on the list should work. If does not work then it means there is an error.
To fix, I need dumps from these modules and a description of what does not work.

Write in detail what exactly is not working?
Check 87, seems to be working normal. By car, I can not check.
EFfI 87 - YouTube

[INJECTMDS]

Parabens Friend sierra! Very Good Software!! Works Perfect ... Not all modules tested yet!!

[Automat]

Fixed some bugs.
Those who want to download the first time, you must first download the archive at this link - http://www.digital-kaos.co.uk/forums/f177/zed-bull-clone-second-life-274682/index4.html#post1681347


Thank you so much Sierra, and to all those who can assist you!!:ciao:

[djfelixrs]

My colleague sierra CONGRATULATIONS!
An excellent software to further improve the use of Zed-Bull Clone!
Thank you!

please pass

:goodpost:

[kerekt]

for me ask for dis.dll
idea?


Fixed some bugs.
Those who want to download the first time, you must first download the archive at this link - http://www.digital-kaos.co.uk/forums/f177/zed-bull-clone-second-life-274682/index4.html#post1681347

[sierra]

for me ask for dis.dll
idea?

Download the archive at this link - http://www.digital-kaos.co.uk/forums/f177/zed-bull-clone-second-life-274682/index4.html#post1681347
Install the program.
New version of the file to EFfI.exe put in the installation folder.
It's simple.

[kuzmichh]

What is on the list should work. If does not work then it means there is an error.
To fix, I need dumps from these modules and a description of what does not work.

Write in detail what exactly is not working?
Check 87, seems to be working normal. By car, I can not check.
EFfI 87 - YouTube (http://www.youtube.com/watch?v=0Lz40nr6yuY)

I have 2 dumps for H1 2004y and Chevrolet Aveo.Both of them are not perceived.If Hyundai H1 I still doubt, the Aveo should be fully working.In the box where the name of the file is written to the file is not recognized.Can you check them?

[triak88]

Sierra,

Great job.You must continue with this .We must support you with donate,saw project will by alive.

Br

[gcesare21]

Sierra,

Great job.You must continue with this .We must support you with donate,saw project will by alive.

Br

I propose to support all members as Sierra that are activated to develop new solutions. :rolleyes:

[Fallen]

Sierra,

Great job.You must continue with this .We must support you with donate,saw project will by alive.

Br

Fair call, I would donate to thank Sierra for his efforts.

[euroscan]

EFfi working good for alfa romeo 147 TS. thanks sierra.

[sierra]

Can you check them?

These dumps are not to understand the program.
To add to the list of programs that should be at least 5-10 dumps for analysis, which would be the program to automatically detect them.
The same should be at least one dump famous pin code.
What other information can not hurt.
Having only one dump without a car, do something meaningless.

[sierra]

New version.
Added ISK Code for Renault.

http://imageshack.us/a/img9/9949/20120915005225.png

[datapage]

very good, good job sierra.
can add transponder module generates vw can?

[micromax]

can you add renault pin code extractor? to generate incode/outcode for reprog and key programming? be greats.

regards

[paul_12345]

can you add renault pin code extractor? to generate incode/outcode for reprog and key programming? be greats.

regards

If someone post a unprotected version of renault pin code extractor, it would be possible but whats the point spending lots of time doing that when you've got a cracked version of it anyway.

[PierreTheron]

can you add renault pin code extractor? to generate incode/outcode for reprog and key programming? be greats.

regards


I think this will take a bit off work together with some brain cells ..

and also not to let the braincells wonder around i think ..

[micromax]

maybe ford incode outcode?

[car_soft_gorj]

pass please !!!!


thanks !!!!
best regards !!!
Teo Romania !!!!

[shitad]

Sierra !!!
I have a question, why is the file size keep going back and forth with each updated release of EFfi exe.

Let me also say once again from all of us here, THANK YOU a MILLION for giving OUR Zedbull Clone a Second Life.

:jiggin:

Regards.

[sierra]

Sierra !!!
I have a question, why is the file size keep going back and forth with each updated release of EFfi exe.

I clench my program packer Mpress whatever size was smaller. Once probably forgot to squeeze :)

[sierra]

can you add renault pin code extractor? to generate incode/outcode for reprog and key programming? be greats.

regards

I'm working on it. If that happen, I'll post the new version.

[shitad]

I clench my program packer Mpress whatever size was smaller. Once probably forgot to squeeze :)


Let me see if I understand you.

Are you saying you can compress the EXE to make it smaller but sometimes you forget to do this !!. and thats is why we keep getting different file size ?.

[sierra]

Let me see if I understand you.

Are you saying you can compress the EXE to make it smaller but sometimes you forget to do this !!. and thats is why we keep getting different file size ?.

Yes.
.......................

[isaky]

hi friend what can i do with this?
thank you

[micromax]

what you need?
pin - 28704 or 08304

93c66
immo
$F2 $F3
$F4 $F5
$F6 $F7

[messhi78]

THANKS FOR SOFT SECOND LIFE ZED BULL MY PROBLEM WHEN I I PROGRAMME KEY WITH DUMP Renault - UCH Johnson KANGO 3 UNSUCCESSFULL WRITE TO KEY

[sierra]

THANKS FOR SOFT SECOND LIFE ZED BULL MY PROBLEM WHEN I I PROGRAMME KEY WITH DUMP Renault - UCH Johnson KANGO 3 UNSUCCESSFULL WRITE TO KEY

Please upload the dump.

[czester]

please password sierra.
tanks

[isaky]

micromax i need a pincode 28704 five number in vag?
is possible??
thank you friend

[micromax]

i don`t understand, pin in vag is always 5 digit
28704
or
08304

if you have 4 digit add 0 on first digit

[valdirld]

can share pass
thanks

[pezao]

thanks sierra
pass please

[cyrixcard]

sierra first thank you for spending time to give life to frustration of using zedbull clone. Next thank you for helping to cut cost as some of us are not big dealers but locksmiths and may not be able to spend $$$$ of dollars on original equipment like tango and tagkeytool and tmpro. Original tools are wonderful but need capital to buy . Thank you again. I will like added generation of self learning key for Mercedes Benz (police key) 97-99 MB C/E/G class

Also i need full updated download for second life. I am new to this and will like to download with updated files so i can keep up with all the fixes and changes made. Thank you dear

zed2life.com ... great work. great people at digital kaos

[cyrixcard]

password please

[sierra]

I will like added generation of self learning key for Mercedes Benz (police key) 97-99 MB C/E/G class

I can not quite understand what you mean, but probably about it :)

http://imageshack.us/a/img7/724/20120918153638.png

For a password to apply to private messages.

[bochen]

I have a question for Sierra. When I open the dump for new Iveco after 2007 module 14 the fields key number and format are grey and there is no choice. Is that normal? Also when I press key to dump, the new dump is the same as the old one or the image of the file is created after programming the transponder. I do it just to check without new transponder.

[messhi78]

THIS DUMP IT UCH KANGOO 3
Fixed this bugs
thanks sierra.

[sierra]

Friends. If you ask a question about what that particular module, load the dump.
I do not have time to look for a dump for verification.

EFfI 14 - YouTube

[sierra]

THIS DUMP IT UCH KANGOO 3
Fixed this bugs
thanks sierra.

Fixed.
But I do not have the transponder 794*, so not 100% sure.
Check it out.

[cyrixcard]

sierra, password please

[andrius]

any news about pin code calculator siera? have you tried?

[sierra]

any news about pin code calculator siera? have you tried?
No, not yet done. One needs to make changes to the program to be able to add their own algorithms.
Doing this when I have time.

PS: Especially for you took the time :)
EFfI User Algo - YouTube

[messhi78]

ERROR WHIT RENAULT TOOL IN EFfi LASTE
NOT ENTER IN THIS CASE WITH CALCULATOR CODE OF KEY+CLIP+REPROG IM POSTE PHOTO IN FORUME SECOND LIFE ZEDBULL
THANKS FRIENDS

[sierra]

ERROR WHIT RENAULT TOOL IN EFfi LASTE
NOT ENTER IN THIS CASE WITH CALCULATOR CODE OF KEY+CLIP+REPROG IM POSTE PHOTO IN FORUME SECOND LIFE ZEDBULL
THANKS FRIENDS

It must be so.
It's not ready yet. I'm not going to put out a new version, but once fixed a bug with 99 module is laid out.

[electrohicham]

password please sierra PM sent ?
thank you.

[bochen]

I have a question for Sierra. When I open the dump for new Iveco after 2007 module 14 the fields key number and format are grey and there is no choice. Is that normal? Also when I press key to dump, the new dump is the same as the old one or the image of the file is created after programming the transponder. I do it just to check without new transponder.
Ok here is the dump

[iozo]

sierra (http://www.digital-kaos.co.uk/forums/members/119881-sierra/) , did you test it whit bmw ews ? i mean did the car start ?

[micromax]

i test it with ews 3 and bmw e46, work ok.

[sierra]

sierra (http://www.digital-kaos.co.uk/forums/members/119881-sierra/) , did you test it whit bmw ews ? i mean did the car start ?

I tested EWS1 and EWS3, okay.

[puiu]

I tested with Rover 75 EWS work ok,

Puiu

[KILL_THE_IMMO]

not working i have a problem device not responding how can i solve it
thanksss

[sierra]

not working i have a problem device not responding how can i solve it
thanksss

What is your version of the software in the device? Should be 5.02
And it must be configured to select the port.

[messhi78]

test ok in alfa romeo 147 id 48
thanks four all

[tas_daz]

i try in clio 2003 with id46 i take dump from uch and i make transpoder programming and then with clip i go to programming i car but nothing.try someone else?in clio?the module 42.thanks

[messhi78]

Please upload the dump clio 2003

[messhi78]

sierra any news about calculator pin code bsi 95128 (207+308...) in soft EFfi it difficult to calculate code for this model please

[tas_daz]

this is my file.i make transpoder with efi in empty 7936 black ccip and then go to programmed with clip but i can t

[micromax]

two files from bsi and description how calc pin code from bsi on 95128

[dam495]

pass please, are there any module for fiat imo box 731 and 732 with mask 1jk ? is it work with dash fiat module 100 from tango? pass please

[JuJo]

pleas pass for EFfi

[sierra]

i try in clio 2003 with id46 i take dump from uch and i make transpoder programming and then with clip i go to programming i car but nothing.try someone else?in clio?the module 42.thanks

I'll see what could be the problem.
In the meantime, you can unlock your transponder for use.

EFfI Unlock46 - YouTube

[sierra]

i try in clio 2003 with id46 i take dump from uch and i make transpoder programming and then with clip i go to programming i car but nothing.try someone else?in clio?the module 42.thanks

I do not know what error. Should work.
What exactly is the problem? Car will not start or Clip can not program the key?

[coolsoda]

I do not know what error. Should work.
What exactly is the problem? Car will not start or Clip can not program the key?

Clio 2 phase 2 you can only program a remote key to vehicle, PCF7936 does not work.

[bochen]

Sierra can you check my post #172? Thanks.

[sierra]

Several times I checked the module 42. I do not see how any mistakes. Have to wait for me to come such a car.


Sierra can you check my post #172? Thanks.

What sort of problem? You ask how to use the module 14?
I shot the video for you - http://www.digital-kaos.co.uk/forums/f177/zed-bull-clone-second-life-274682/index11.html#post1701231
Or module 14 does not work?

[sierra]

Several times I checked the module 42. I do not see how any mistakes. Have to wait for me to come such a car.


Washes you have misunderstood the module 42?
In the description of the module is written:

Programme the Generated Dealer Key with the Calculated Pincode to the Vehicle Using Diagnostic Device


Here I put a help file from Zed = Bull, see how to use the modules.
http://www.digital-kaos.co.uk/forums/f177/zed-bull-clone-second-life-274682/index8.html#post1687528

[coolsoda]

Clio 2 Phase 2 will only take a Hitag keyPCF7946 ,pcf7936 wont work,same as with the newer vauxhalls that will only take the remote key or special circuit board

[fodortms]

Hi Sierra Please password for the archive.
Br. Tamas

[bochen]

Several times I checked the module 42. I do not see how any mistakes. Have to wait for me to come such a car.



What sort of problem? You ask how to use the module 14?
I shot the video for you - http://www.digital-kaos.co.uk/forums/f177/zed-bull-clone-second-life-274682/index11.html#post1701231
Or module 14 does not work?
Thanks for explanation, it works a little bit different than Tango where I could choose the nubner of key I want to program . In zedbull I just add the next key.

[sierra]

The module 57 and 98 transponders added the ability to record 7946/47(remote key).
Check.

[HenrichSGU]

this error by open sw

[sierra]

this error by open sw

Sorry.
Here's the full(installation) version.

[chinhi]

sierra password Please

[antonypaul]

dear friend
i need to program new key in Toyota innova all key lost denso Ecu 4d 67 any help thanks in advance

[iozo]

whit this software we don`t need to buy original zed bull , yes they can copy ID 46 and 4D but , we can produce transponder and intruduce it to car :) 10x sierra you save me a lot of money !!!!

[dam495]

hi tried to install the full instalation , but is't not working it's is showing to select the language , and after this the nothing is happing, the program just disappears. what can i do , where is the problem?

[mecadriano]

fiat b.14
95c160/95c320 8pin(SSOP), 2048/4096 Bytes
Fiat: Bravo(2007-), Ducato(2006-), Stilo(2007-), Punto(2007-), Linea(2007-)
Citroen: Jumper(2006-), Relay(2006-)
Peugeot: Boxer(2006-)
Lancia: Ypsilon(2007-)
Iveco: Daily(2007-), Eurocargo(2007-)
ID: 48

test 100% ok
Thanks for the great job friend,

[mecadriano]

b 01 gm immo2

TMS370C702/Motorola MC68HC908AB16A (L72A), 28pin/64pin, 256 Bytes/512 Bytes
Opel: Agila, Astra G, Combo C, Corsa C, Meriva, Omega(1999-), Sintra(1999-), Tigra, Vectra B(1999-), Zafira
ID: 40
Transponder Type: Blank Pcf7935
Transponder is ready to start the vehicle

test tms 370 100% ok

Thanks for the great job friend,

[mecadriano]

b.70
93c66, 8pin, 512 Bytes
Renault: Kangoo(2002-2007), Twingo(2002-2007), Trafic(2002-2007), Master(2002-2007)
Opel: Vivaro(2002-2007), Movano(2002-2007)
Nissan: Interstar(2002-2007)
ID: 46
Transponder Type: PCF7936
Programme the Transponder to the Vehicle with a Diagnostic

test 1005 ok

Thanks for the great job friend,

[pezao]

please sierra pass thanks

[cyrixcard]

sierra, please password. I am waiting. please

[delek]

Hi Sierra Please password, Thanks!

[HenrichSGU]

hi tried to install the full instalation , but is't not working it's is showing to select the language , and after this the nothing is happing, the program just disappears. what can i do , where is the problem?

This version of install sw work ok.
Try disable antivirus or some similar sw, check your system for problems...
What Windows u use ?

[sierra]

hi tried to install the full instalation , but is't not working it's is showing to select the language , and after this the nothing is happing, the program just disappears. what can i do , where is the problem?

Re-download the latest file and check it out.

[dinar]

Thank you sierra, gooood yob


password Please

regards

[andrius]

for sierra project :) 145344

[sierra]

for sierra project :) 145344

:beer:
...............

[kerekt]

I tested too yesterday , it not work becouse for CLIO2 mux never sold key with 7936 inside.
When you match this key with clip, in not work , becouse 7936 dont have remote information inside ...
This tool work well on Twingo which sold with simple key.
Also Renault Dealers warned about it, dont buy SIMPLE keys for clio only REMOTE !


i try in clio 2003 with id46 i take dump from uch and i make transpoder programming and then with clip i go to programming i car but nothing.try someone else?in clio?the module 42.thanks

[BMWFan]

send me password please!!!

[sierra]

I tested too yesterday , it not work becouse for CLIO2 mux never sold key with 7936 inside.
When you match this key with clip, in not work , becouse 7936 dont have remote information inside ...
This tool work well on Twingo which sold with simple key.
Also Renault Dealers warned about it, dont buy SIMPLE keys for clio only REMOTE !

I do not understand the Renault models, but like Clio2 not present in the list of the module 42.
http://imageshack.us/a/img850/3846/20120921135628.png

[kerekt]

im not renault expert too, but clio hb i think clio2, clio2 phase 2 and 3 have multiplexed system , they use pcf7946 , you cannot match 7936 with clip becouse clip cannot read remote info from 7936 and cannot save in uch, procedure aways stop with error

[sierra]

im not renault expert too, but clio hb i think clio2, clio2 phase 2 and 3 have multiplexed system , they use pcf7946 , you cannot match 7936 with clip becouse clip cannot read remote info from 7936 and cannot save in uch, procedure aways stop with error

Ok, thank you. I will add to the program information on this.
I do not know why the original ZED-Bull to do so.

[coolsoda]

Not tried but may be possible to program PCF7936 to clio,by writing in Hitag2 pages 456&7 onto a pcf7936,here is the digits if someone wants to try

[iozo]

is this software works whit http://www.sinosells.com/goods-8112-Super+Mini+Type+Smart+Zed-Bull+Key+Programmer.html 10x in advice

[djfelixrs]

Someone already tested with Opel2R? I tried here and failed chip generated

[whiskeyman]

been testing this and must say great job lads

[subjx]

sierra, let me know pass, please.

[KILL_THE_IMMO]

What is your version of the software in the device? Should be 5.02
And it must be configured to select the port.
devicxe soft is 5.29 pfffffffffffff

[sierra]

devicxe soft is 5.29 pfffffffffffff

The first time I heard about this version in the clones. Where you bought the ZED-Bull?

[sierra]

If anyone has a dumps of Kessy (any), please put here.
Thanks

[elektro128]

If anyone has a dumps of Kessy (any), please put here.
Thanks


kessy files from dkforum ;)

regards

[ammarben]

an other kessy for you sierra
http://www.digital-kaos.co.uk/forums/attachments/f178/144135d1347697577-audi-a8-kessy-audi-a8_kessy.rar

[ammarben]

http://www.digital-kaos.co.uk/forums/attachments/f178/141997d1346842495-vw-toureg-toureg-kessy.rar
good luck for your great work

[sierra]

I also downloaded a lot of dumps from the forum :) but could not find my desired.

[messhi78]

THIS DUMP FOR TEST IS GOOD

[automan]

I also downloaded a lot of dumps from the forum :) but could not find my desired.
what is your desired kessy?

[micromax]

from touareg

[micromax]

from audi a8

[sierra]

what is your desired kessy?

With this program, you can determine suitable dump me or not :)

I could be wrong, and this variant does not exist at the dump.
But check with yourself if there is at least one :)

kessy - YouTube

[dam495]

b 01 gm immo2

TMS370C702/Motorola MC68HC908AB16A (L72A), 28pin/64pin, 256 Bytes/512 Bytes
Opel: Agila, Astra G, Combo C, Corsa C, Meriva, Omega(1999-), Sintra(1999-), Tigra, Vectra B(1999-), Zafira
ID: 40
Transponder Type: Blank Pcf7935
Transponder is ready to start the vehicle

test tms 370 100% ok

Thanks for the great job friend,

how about opel2rls? and fiat dash palio? working?

[tas_daz]

in renault clio i make transpoder and then with true code and with clip i can t programmed the key.you try with sbb nad you programmed in chip with dump from uch with zed bull?in carbon chip?sierra if you find solution for clio it is very good.thanks for all your work

[mirceafilip]

: Afacere:
Why do all have forgotten about the Zed-Bull, which is a pity, because a good instrument :)
Offered share their experience on the Zed-Bull.

For the password contact the PM.

[strato]

If anyone has a dumps of Kessy (any), please put here.
Thanks

I have not option detect dump!
How I do this option.Thanks

[sierra]

in renault clio i make transpoder and then with true code and with clip i can t programmed the key.you try with sbb nad you programmed in chip with dump from uch with zed bull?in carbon chip?sierra if you find solution for clio it is very good.thanks for all your work

You mean what module you say? Of module 42?

Clio2 to do here so no one tried it?

http://imageshack.us/a/img17/7141/20120922105755.png

I will ignore the error messages that do not indicate the modules and is not attached dump.

[gepakg]

for proper programming of clio2 any model,on crypto hi-lo must be ISK,a do hundred of this:-)

sometime guys from istanbul anahtar think that only will be enough on page 3 to change 06 to 0e or switch to crypto mode,but i know and 100% sure that on pcf7936 must be proper crypto hi-lo from dump

will test if sierra sw work good and report results

regards Gepa


You mean what module you say? Of module 42?

Clio2 to do here so no one tried it?

http://imageshack.us/a/img17/7141/20120922105755.png

I will ignore the error messages that do not indicate the modules and is not attached dump.

[KILL_THE_IMMO]

The first time I heard about this version in the clones. Where you bought the ZED-Bull?
it is original


really sierra u r doing a great job congratulation

[sierra]

it is original


really sierra u r doing a great job congratulation

This software-only clones.
Who has the original of why you need this software.

[gepakg]

because is better than original! :-)

regards Gepa


This software-only clones.
Who has the original of why you need this software.

[sierra]

Who has the original ZED-Bull, you can give a list of changes since version 7.29 and above?
Better to write a PM.

[sierra]

because is better than original! :-)

regards Gepa

:) Thanks...

[gepakg]

as i promise only to confirm that module 42 work 100% correct!

here is dump and screen shot that we can see crypto hi-lo are pre-programmed by dump and page 3 switched to crypto mode,these are only things that can be done for successful programming with any tool,i tried with sbb,ad100,clip...

this things are need for simple pcf7936,but prepareing crypto hi-lo with factory settings and switch page3 to crypto for sure impossible with any tool to match this on car

module 42 WORK correct:-)

regards Gepa


:) Thanks...

[kerekt]

i tryed same 2 days ago, not worked for me, i switched the prepared 7935 into crypto mode, but CLIP don`t match transponder. I dont have t300 or other for try.....



as i promise only to confirm that module 42 work 100% correct!

here is dump and screen shot that we can see crypto hi-lo are pre-programmed by dump and page 3 switched to crypto mode,these are only things that can be done for successful programming with any tool,i tried with sbb,ad100,clip...

this things are need for simple pcf7936,but prepareing crypto hi-lo with factory settings and switch page3 to crypto for sure impossible with any tool to match this on car

module 42 WORK correct:-)

regards Gepa

[gepakg]

pcf7935 of course not possible,excatly pcf7936 as!!!

regards Gepa


i tryed same 2 days ago, not worked for me, i switched the prepared 7935 into crypto mode, but CLIP don`t match transponder. I dont have t300 or other for try.....

[coolsoda]

As the PCF7936 has its own serial number,you will still have to program to the vehicle,seems a lot less work to program in a new ?15 remote key,so no need to remove UCH,if its just the pin code you require you can extract the ISK with DDT2000

[dam495]

sierra you are doing a wonderfull job, ht , thanks do you have any idea if it's possible , fiat dash 95 c160 fiat imobox with mask 1k59h? fiat imobox with mask im106.00c if i send the dump from this imo box can you do something?

[sierra]

sierra you are doing a wonderfull job, ht , thanks do you have any idea if it's possible , fiat dash 95 c160 fiat imobox with mask 1k59h? fiat imobox with mask im106.00c if i send the dump from this imo box can you do something?

Send a dump .... but will not promise :)

[sierra]

Today accidentally found an old screenshot. Where to start the program :)
http://imageshack.us/a/img832/2940/20111018193909.png

[pezao]

Hello Sierra Can you please send me password for for program EFfI.
thanks

[sierra]

Read the first post in the thread.

[eprommazza]

I think we should all add reputation for sierra simply lower left

[pezao]

thanks you Sierra very good program

[euroscan]

- Error 9 if i try unlock ID48 for alfa romeo.
- zed-buul 5.08 do it.
- i make lock by change Word1 from 0E16 to 4E16.