Have all d gearfor kryptview BUT

[brano.01]

Hi there assugested i got d Maplins USB to RS232 and driver Have t
ried all com/ports this is what i see at final loading stage
Cant open serial port com 1 or 2 or3 etc
please check if the com port has the following parameters.
Baudrate : 115200 bps
Parity No parity
Data byte : 8bit / data
Stop bit : 1
which means absoloutely nothing to thick moi.

[wilf]

Have you got the loader and 30/11/08 firmware? I take iy you using laptop as you are changing com ports

[wilf]

When you done that follow this
:: disconnect box from mains and cable (so all you have is box and a plug)
:: connect usb to laptop then to 9 pin to box (null cable)
:: plug box in and turn on you (should have 4 numbers on display)
:: Find the down-loader on desktop you downloaded (it looks like a grey satalite dish) and double click with mouse
:: Press on the green download button
:: another box appears (code send)
:: press open
:: locate the latest kryptview file in this case 29/11/08 (bin file) (should be on desktop)
:: click on it once so is highlighted
:: press open
:: this info is now in the box that says file
:: select the comport number
:: turn box off at wall
:: press start
:: switch box back on
:: if correct comport selected you should now see download going up in percentage (on laptop)
:: green line should be going round and round (on box display)
:: if not try another comport and try again (one will work! Honest)
:: when it gets to 100% look on box front the green line should now be going round really fast (flashing)
:: dont disconnect cables until box switches itself off and on again (reboots)
Congratulations you have flashed your kryptview
:: connect back up to scart and cable
:: press menu
:: installation (automatic)
:: select correct cable provider for your area
:: press start
:: when finished go to sly sports channel and wait for it to unlock itself (job done!)
Enjoy your viewing

[brano.01]

Thanks Wilf
will try that i was using 28/11/2008 in a desk top
am not going to give up now cheers.

[wilf]

on my desk top i use 9 pin to 9pin cable not the usb to 9pin i dont have to change the comports at all with that

[brano.01]

Hi Wilf,
Still in trouble tried to download d 30/11/2008 firmware but it goes to a bin or something am going to stop 4 d night head is spinning

[bugaloo41]

brano its a bin file that you send to your box. now just follow wilfs excellent tut and you hopefully be good to go.

[wilf]

thanks boogaloo have added that to tut to save any confusion. if you tried as per instruction and still no go, i wouldnt be supprised if you got wrong cable. make sure it is NULL cable and not Serial cable

[brano.01]

thanks M8 will try 4 a null cable i might have a serial cable though advertised to do these downloads.reading a different thread saw somthing about checking com/port properties does any 1 know how to do this cheers

[wilf]

http://www.digital-kaos.co.uk/forums/f34/how-change-com-port-settings-using-usb-serial-adapter-1926/?highlight=changing+port (hope this helps, have a read through)

[brano.01]

Thanks Wilf and Bugaloo for all your patient help i am waiting for the NULL CABLE IN THE MAIL.WILLSEE HOW IT GOES
THANKS GUYS,