10057 Error in function send socket not connected

[bwfc89]

Hi Guys,

I no there are previous threads on this but there seems to be no solution. I have two dreamboxes dm500 which have been working fine until today.

When I open DCC and enter the IP addresses I know are correct I am just getting the "100057" Error message. I have a green connection from the computer to the router but the connection from the dreambox is red.

Can anyone advise me on this as I can not get it to work.

Thanks

[mdt]

Hi Guys,

I no there are previous threads on this but there seems to be no solution. I have two dreamboxes dm500 which have been working fine until today.

When I open DCC and enter the IP addresses I know are correct I am just getting the "100057" Error message. I have a green connection from the computer to the router but the connection from the dreambox is red.

Can anyone advise me on this as I can not get it to work.

Thanks


if you are sure that the password is correct and ip addy has no conflicts(try fixed ip instead of dchp) then try a re-boot and then a re-flash... ive seen this before when ive just plugged the box in and sometimes it takes a while for it to work properly. you could try a later version of DCC also to see if it helps. regards mdt

[blackpool1974]

Make sure your router hasnt reset and changed the ip addresses of your boxes thats what happened to me today

[bwfc89]

Thanks for replys guys,

For some reason the dcc program yesterday just decided it didnt like one of the boxes IP addresses. So simply did a restore of the tp links I have and set a new IP to the dreambox and its working fine again.