clio 99 1.4 8v immo off pls

[honingkoning]

Hello Mates,

i am having some problems on the immo of a 99 clio.
Its a 1.4 8v no ac
type ecu is a sirius 32n with next nr's s110130334____A

i tried the file from this topic http://www.digital-kaos.co.uk/forums/f178/need-immo-off-renault-clio-1-4-a-268704/

car is running but very low idling, probaply caused because the car from other topic was with AC.

And mine does not have AC

Could someone hand me a good file or change my file into a good file, and pls no emulator had bad experience with them.

[klakier]

Hello Mates,

i am having some problems on the immo of a 99 clio.
Its a 1.4 8v no ac
type ecu is a sirius 32n with next nr's s110130334____A

i tried the file from this topic http://www.digital-kaos.co.uk/forums/f178/need-immo-off-renault-clio-1-4-a-268704/

car is running but very low idling, probaply caused because the car from other topic was with AC.

And mine does not have AC

Could someone hand me a good file or change my file into a good file, and pls no emulator had bad experience with them.




your file off

[honingkoning]

your file off

Thank you i will test and report.

[honingkoning]

Thank you i will test and report.

Not ok the car does not start, can someone give me a tested/working file.

Regards Adam.

[lupu_sandu]

Your file off - cut pin 58 (pass in pm)......

[honingkoning]

Your file off - cut pin 58 (pass in pm)......


Thanks i will let you know how it worked out

[honingkoning]

Thanks i will let you know how it worked out

File also not work, could some supply me ? tested file.

Btw is it possible to re use ? emulator, i have one renault emu but from ? second hand ecu.
Is this possible Or is that adapted to the ecu from where i removed it.

Regards Adam.

[bulanbulanov]

I can't verify if this file is different from others (there are password protected) but in all files I ever made i use this metod. I don't know why, but for some ECU you need emulator to work. If there is a CAN controller on ECU's board your car never start, no imo off sollution.
By the way, I think Lupu Sandu's file is good, he never fails.

[jairpg21]

try this and report

[honingkoning]

I can't verify if this file is different from others (there are password protected) but in all files I ever made i use this metod. I don't know why, but for some ECU you need emulator to work. If there is a CAN controller on ECU's board your car never start, no imo off sollution.
By the way, I think Lupu Sandu's file is good, he never fails.

There is no can controller in ecu, and i know lupu is ? good immo manipulator :proud:
But car does not start and with ori soft the car starts 50/50.

[klakier]

There is no can controller in ecu, and i know lupu is ? good immo manipulator :proud:
But car does not start and with ori soft the car starts 50/50.


This file is tested by me and working 100% If this not working you have a problem with the ECU power supply or GND. Check or change shaft position sensor

[lupu_sandu]

Did u cut pin 58? If yes, maybe your original file is corrupt.
My immo off solution is OK

[cool2503]

file immo off 100% work ok without ac.cut wire 58 from ecu
+ pin 29 on contact
+ pin 30 batery
gnd 15,3,33

[honingkoning]

This file is tested by me and working 100% If this not working you have a problem with the ECU power supply or GND. Check or change shaft position sensor

Is this the file as you poster before? Shaft pos sensor is already changed so that is not the problem, the car went to dealer but they where not able to repair this car, car sometimes dont start but does not hold any dtc.
Very strange but true.

I Will test all files and let you know.

Regards Adam.

[klakier]

no, it's another file, the first file was tested too and working well.

[honingkoning]

This file is tested by me and working 100% If this not working you have a problem with the ECU power supply or GND. Check or change shaft position sensor

Thanks i will let you know, is this file without airco, cause i had one file from a car with ac and the car was starting and running good except iddle that was bad.

And does i matter that your ecu have different nr then my ecu.

Regards Adam.

[honingkoning]

Thanks i will let you know, is this file without airco, cause i had one file from a car with ac and the car was starting and running good except iddle that was bad.

And does i matter that your ecu have different nr then my ecu.

Regards Adam.


Thank you very much guys my problem is solved with lupu's file.
There was a almost invissible wire (from the desoldering braid that connected 2 pins which was causing the flash not to work normally)
after removing the wire everything ok, so everyday keep learning.

[mec]

hi
please help to immo off
clio 1,4
sirius 32n
s110138000
8200059086

pls make immo off

thanks, mec

[mec]

i find in old post here
thx,mec

[arvedo]

here is the solution 16v

[mec]

http://www.digital-kaos.co.uk/forums/members/177004-cool2503/

i solved with this dump
thx, mec

[Harrycz44]

your file off

Hello pleas pass.. thank you very much

[benyse]

Your file off - cut pin 58 (pass in pm)......

i have the same ecu with sirius 32n 8200059086 S110138000 please remove the immo , the car is with A/C
Thanks