toyota key copier programmer?

[sideshow]

hi
im interested in buying this toyota key programmer
i have a wellem eeprom reader burner
so shoudl i spend the 400 dolalrs to buy this
Toyota key programmer-toyota key maker-Toyota key copier-Online Shopping (http://www.xcar360.com/toyota-key-copier-programmer.html)

or should i spend abit more and buy one that does a wider variety of cars
i probably need it mainly for japanese vehicles

[leandroks]

With that money u can buy a ad900 or other wich can copy a wider list of transponder...

[sideshow]

ok thanks for that

[sideshow]

just been reading what the ad900 can do

will it program a key if you read the dump on the immobiliser chip just like the toyota key programmer can
so u basically read the dump load the dump up and then program a key to suit that dump

thanks

[leandroks]

No i dont think so but when u are working with toyotas in general u can code keys manually so it is up to u but i would never spend that amout on that device...

[sideshow]

I know I can add keys manually
But u normally need one master key to add te others
Or u need to virginise the dump
That Toyota tool looks like it simplifies things
Read dump and reburn or flash or code key to suit the dump
No stuffing around
Is there a tool that can do this for Toyota but also for other
Car manufacturers

Thanks

Jim

[sbtriny]

hi, m8.
I'm not recommand this tool.
if you must need toyota key tool, think about clone king

Clone king-King key-Clone King key programmer-Online Shopping (http://www.xcar360.com/clone-king-key-programmer.html)

I use a clone king.(brought another seller.)
it work well and simple.
but, it can't push any buttons.
so, I'm not recommand chinese clone tools.

best choice is original tools.
example, Tango or TMP pro, AVDI etc.

because, chinese clone tools work well, first time.
but, they have problem after several days or months.

[sideshow]

Ok thanks for that info
I might look at tango

[sideshow]

Ok I just saw tango is close to 1800 dollars
Well I just do about 4 keys per year at moment so not worth it
I mainly need something to learn and mainly use it for
When I fit late model landcruiser engines to early landcruisers
When we buy used motor from wreckers or salvage yards we don't always have the whole kit

I have to do the elctricals so motor and gets powered up
Then I have to wire up the immobiliser ecu to the engine ecu
Then I have to wire in the key reader
Sometimes we don't get everything so if we don't get matching key I want simple solution to program new key or I might even buy new 4c or 4d chips and tape them to key reader after I flash em

In the end I would like to flash ecu so I don't need the key or immobiliser ecu but i know with toyotas it's very difficult

[cleevesy]

you can make most toyota keys without the need of expensive tools , by just reading the memory of the immo module or ecu and adding key data with your brain to the dump.

[sideshow]

Yes I want to learn how to read the dumps
And I need a key reader
I already have a wellem chip reader
So I'm thinking for 200 bucks I'll just buy the ad900
This will read the keys for me then I can add them to the dump

I have a immob with matching keys so once I get the ad900
I'll read the key then find in the dump where the key start is
And try this on afew different landcruiser immob to se if they all match up
Then I'll buy some blank 4c and 4d chips and then just program them to suit the immob dump
Just remember the key reader and ignition barrel are not there
The engine is wired up into another car
So I have to wire in the immo ecu and the key reader to the engine ecu and they just sit behind the glovebox area
And I tie the key to the reader

If I could I would remove immo ecu and key reader and flash engine ecu with immo off dump
But I've red this is to hard
So for now I'll just read immo dump and flash transponder chip with correct dump and tape the chip to the reader