View Full Version : FORD FIESTA 4500 RDS
giruzzo
16th June, 2012, 05:25 PM
someone can help me to read without removing the processor ST92F120V107 programmatroe with i2c?:giveup:
Badbad
16th June, 2012, 06:25 PM
someone can help me to read without removing the processor ST92F120V107 programmatroe with i2c?:giveup:
send serial from stereo
giruzzo
17th June, 2012, 12:22 PM
or only non-serial printed circuit:dong:
flurthi
17th June, 2012, 01:10 PM
Device Information ( mcu ) : ST92F120V1Q7
Flash (adr/size) : 0x0 / 0x20000 (131072) byte
Eeprom (adr/size) : 0x220000 / 0x400 (1024) byte
OTP (adr/size) : 0x231F80 / 0x80 (128) byte
RAM (adr/size) : 0x200000 / 0x1000 (4096) byte
ST92Fxxx Microcontroller Interface
General pinout for Clip Port - ST92Fxxx MCU :
Port2.2 - Reset (ST92Fxxx)
Port2.3 - SIN0 (ST92Fxxx)
Port2.4 - TxClk (ST92Fxxx)
Port2.5 - RxClk (ST92Fxxx)
Port2.6 - SOUT0 (ST92Fxxx)
Port2.7 - GND (ST92Fxxx)
How to read, erase, write or verify:
- open unit, compare your pcb according to following types:
http://forum.martechttp://forum.martech.pl/download/ST92F124V1QB.jpgh.pl/download/ST92F120V1Q7_type1.jpg
http://forum.martech.pl/download/ST92F120V1Q7_type2.jpg
http://forum.martech.pl/download/ST92F120V9Q7.jpg
- choose cpu model in programmer bookmark, solder wires to radio pcb
- choose desried area in settings (full, Flash, Eeprom, OTP, Eeprom v2)
- do Read, Erase, Write or Verify
flurthi
17th June, 2012, 01:16 PM
Hi! ***8203;***8203;Excuse me, made ***8203;***8203;so many posts, I had a problem with the internet, sorry for this,
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.