PASSAT B5 (1997) PROBLEM WITH DASHBOARD

[makadam]

Today I tried to change odometer in passat B5 1997 I read 93c66 with willem use tachosoft to change km (VDO) and now car wont start and some numbers and strange letters appear in dashboard display.
Can someone help me to repair this dashboard. I need dump with Immo off because car doesn't start each time and imobilazer light blink, and set odometer to 190000-200000 km.

[smayer]

Today I tried to change odometer in passat B5 1997 I read 93c66 with willem use tachosoft to change km (VDO) and now car wont start and some numbers and strange letters appear in dashboard display.
Can someone help me to repair this dashboard. I need dump with Immo off because car doesn't start each time and imobilazer light blink, and set odometer to 190000-200000 km.

Have you tried rewrite the original dump and test?

[luis12]

Easy solution, you read this eeprom in 8bit, and of course rewrited it in different density. I imagine you saved the original dump for make rewrite, then rewrite the eeprom in 16bit and test if all normalices edit it in the right density, thats all.

[makadam]

I read eproom in 8bit. File is attached. Can you check it? If dump is damaged can someone give me dump with immo off? BTW I tried to rewrite this dump but car wont start and dash display write some strange symbols and some tone hear from dashboard! I write changed dump in same chip.


VDO 110.008.776/005
VW 3B0 919 880D



http://img24.imageshack.us/img24/5576/20120620001943.jpg (http://imageshack.us/photo/my-images/24/20120620001943.jpg/)

[smokey08]

Dump is bad, You should of read it 16bit. Have you got VCDS? What engine ecu is in car?

[Shmortz]

here you go, good dump

[makadam]

here you go, good dump

Km is 115000 and there is def message on km display when ignition is on!

[Shmortz]

you are right, I corect the file and upload it again, try and report

[makadam]

you are right, I corect the file and upload it again, try and report

I will tryit on monday iam going to vacation during weekend. Just one more question. Can i program keys with vcds even def message is still displayed on km display. Maybe dump you send me is bad i dont know i dont have any experiance with this. What is def meaning, eeprom content malfunction or something else maybe?

Send from Samsung Galaxy S2

[chrismoore02]

You can program keys with vcds but you will need the pin code for the car

Sent from my Galaxy Nexus using Tapatalk 2

[makadam]

You can program keys with vcds but you will need the pin code for the car

Sent from my Galaxy Nexus using Tapatalk 2

Pin from new dump 93c66 or pin from ecu from car, i don't understand. I already know pin from new dump that my friend Shmortz send me!
I dont know will def message which appear in display allow me to program new keys, or maybe it will disapear after i program keys with vcds
Send from Samsung Galaxy S2

[makadam]

Problem was low voltage of car so after writing good dump I successfuly programed 2 new keys. Thank you so much my friends!