Passat B5 93c66

[makadam]

Is there a way to deactivate immo from Passat dashboard VDO1 with 93c66 inside. There is new eproom chip installed (93c66) and car wont start? I have VCDS how to program 2 keys again?

VW 3B0 919 880D

[bodzio012]

You read pin from old eeprom or old dash and lern keys, I think that if you want immo off you should made EDC or if you have benzin ECU

[PETAR]

you can use vag emulator
work perfect on this car

[Shmortz]

...or make i*mo off in engine ecu and remove key LEd on the dash...

[makadam]

You read pin from old eeprom or old dash and lern keys, I think that if you want immo off you should made EDC or if you have benzin ECU

Old eprom is dead instrument cluster is same only new eproom installed with data from another cluster. How to learn keys? Also there is message - def on instrument display after ignition on. Also I can not connect to engine Ecu. On Vcds manual says i need to write immo identifier and vin and send to VW dealer !
Can somone give me pin from dump?

[TULGEYWOODMAN]

Old eprom is dead instrument cluster is same only new eproom installed with data from another cluster. How to learn keys? Also there is message - def on instrument display after ignition on. Also I can not connect to engine Ecu. On Vcds manual says i need to write immo identifier and vin and send to VW dealer !
Can somone give me pin from dump?

do you have the pin from your car already?
then you need pin from replacement cluster

[makadam]

do you have the pin from your car already?
then you need pin from replacement cluster

Is there a way to read pin from dump?