PDA

View Full Version : Piasini manuals



VTS_Tibi
23rd June, 2012, 09:19 AM
Hi Guys,

Here are all the manuals I have found for the Piasini tool.

There are a few for bikes, loads for cars (170 to be exact), and I've also added my pics of the interface cables.


https://hotfile.com/dl/160883696/d86db02/Connections.zip.html


Feel free to add yours if that is not in the lot!


Press the thanks button if my post was useful! :)

rocris
25th June, 2012, 09:00 PM
Hi,
i have a Denso R2AX ecu from mazda CX7 2.2 cdi 173cp 2010 year; this ecu was damaged by dealer during sw update and i want to fix it
Inside is bga mcu R4F7059OV and i think that is renesas SH7059
Please can help me with connections for this ecu? Any idea is welcome.

Thank you!

VTS_Tibi
28th June, 2012, 07:22 AM
Hi,
i have a Denso R2AX ecu from mazda CX7 2.2 cdi 173cp 2010 year; this ecu was damaged by dealer during sw update and i want to fix it
Inside is bga mcu R4F7059OV and i think that is renesas SH7059
Please can help me with connections for this ecu? Any idea is welcome.

Thank you!

Have you tried checking the pdfs from my first post? That's all I have, maybe the other could help you! :)

rego88
29th June, 2012, 01:36 PM
thank's tibi!! ;)

rego88
29th June, 2012, 04:37 PM
sorry tibi, now i see the document's for car... but the folder of mazda have the password.... please send me on the pm?? thank's

OVERSPEED
29th June, 2012, 06:56 PM
Hi...noticed one thing M7.3.1 x ME7.3H4 states the same ECU number (Punto I guess) but diferent pins

I Want to make a Marea 2,4 petroil, it uses an ME3.1... which one is the rigth pin out ?

speedy100
2nd July, 2012, 11:01 AM
Hello,
Here I attach some pics of the Bosch ECU from a Citroen C1.
It actually is a Toyota engine common in Toyota, Citroen, Daihatsu...
It is suppose to be an ME7.9.5 but it has differences as You will see in the pics. Does anyone has the correct connections for reading-writing on this one?

Thanks in advance :)

VTS_Tibi
3rd July, 2012, 10:34 AM
Hello,
Here I attach some pics of the Bosch ECU from a Citroen C1.
It actually is a Toyota engine common in Toyota, Citroen, Daihatsu...
It is suppose to be an ME7.9.5 but it has differences as You will see in the pics. Does anyone has the correct connections for reading-writing on this one?

Thanks in advance :)

I think that is the same ECU! Just look at your pics! It is the same, but your ECU misses a few components - maybe it does not have to control a few devices which the other does!

Have you tried to read it with your Piasini?

speedy100
3rd July, 2012, 11:43 AM
I think that is the same ECU! Just look at your pics! It is the same, but your ECU misses a few components - maybe it does not have to control a few devices which the other does!

Have you tried to read it with your Piasini?

Thank You for Your reply.
Just the pic is from Piasini. I have MAGPro original and it does not read it. When I had support from MAGPro they did not find a solution for me. Now I have an other C1 to do but it seems like I will miss this one also...

Thanks anyway.

pepeoi
3rd July, 2012, 01:41 PM
Do you have pass for mazda folder? Thak you!

autotuning
3rd July, 2012, 08:39 PM
Did you manage to fix this?
If not pm me i will help you
regards
Dave


Hi,
i have a Denso R2AX ecu from mazda CX7 2.2 cdi 173cp 2010 year; this ecu was damaged by dealer during sw update and i want to fix it
Inside is bga mcu R4F7059OV and i think that is renesas SH7059
Please can help me with connections for this ecu? Any idea is welcome.

Thank you!

speedy100
3rd July, 2012, 10:32 PM
Hello,
Here I attach some pics of the Bosch ECU from a Citroen C1.
It actually is a Toyota engine common in Toyota, Citroen, Daihatsu...
It is suppose to be an ME7.9.5 but it has differences as You will see in the pics. Does anyone has the correct connections for reading-writing on this one?

Thanks in advance :)


Any info on this problem guys???

VTS_Tibi
4th July, 2012, 11:28 AM
Do you have pass for mazda folder? Thak you!


Unfortunately not :( it came here from DK, but I did not have a password for it!

The pics which are in the compressed folder, are about the 1.6 2.0 2.3l Mazda petrol engines. If you need those try to have a look around here on DK, and find who did post those! :)

peregrine
7th July, 2012, 03:12 AM
Any one by any change hve the pin out for this car?

Citroen C5 2.0 HDI 136 CV Delphi DCM 3.4

proel
21st July, 2012, 11:55 PM
Is there connections pinout for renault sagem s3000 ?

peregrine
22nd July, 2012, 02:50 AM
Here you go!

bmw320d
14th August, 2012, 10:28 PM
Hi guys, somebody has the coonection from piasini to vdo/siemens rotax of ecu jetski seadoo rxt 215hp?
I haven't succeeded in finding it
Thanks in advance

mariazo84
14th August, 2012, 10:40 PM
thanks thanks

peregrine
16th August, 2012, 05:29 AM
Any one need subaru ecu conections? Also does nay one have marine ecu connections.

johnie-9
22nd August, 2012, 06:50 PM
Hi! Is there a connection for read/write te sagem s2000-23 ecu with piasini, or similar tool?

Catalin_TCM
29th August, 2012, 07:46 PM
Connection for ECU - HONDA ACCORD 2.0i 155cv please ?

Catalin_TCM
29th August, 2012, 08:31 PM
I found , pcb is like ACCORD 2.4i 2008

mariazo84
25th September, 2012, 09:38 PM
thanks good

kardi78
1st October, 2012, 06:11 PM
Hi Guys,

Here are all the manuals I have found for the Piasini tool.

There are a few for bikes, loads for cars (170 to be exact), and I've also added my pics of the interface cables.


https://hotfile.com/dl/160883696/d86db02/Connections.zip.html


Feel free to add yours if that is not in the lot!


Press the thanks button if my post was useful! :)


SZIA, van nekem egy piasini eszk?z?m de hi?ba prob?lkozom vele, nem m?k?dik. Ha esetleg tudn?l seg?teni ebben a k?rd?sben akkor k?ldj nekem egy el?rhet?s?get a -ra.El?re is k?sz?n?m.

kardi78
1st October, 2012, 06:23 PM
Hi Guys,

Here are all the manuals I have found for the Piasini tool.

There are a few for bikes, loads for cars (170 to be exact), and I've also added my pics of the interface cables.


https://hotfile.com/dl/160883696/d86db02/Connections.zip.html


Feel free to add yours if that is not in the lot!


Press the thanks button if my post was useful! :)
szia, van egy Piasini eszk?z?m amit?l m?r megbolondulok. Tudn?l nekem seg?teni a be?zemel?s?ben? Ha igen akkor esetleg k?ldj egy el?rhet?s?get a -ra ?s megkereslek. ?llandoan hibauzenetet ir ki, pedig telep?tve van a driver, a h?tt?r bez?ld?l ?s engedi kiv?lasztani a megfelel? ecu-t is. Minden k?bel a hely?n t?bbsz?r is leellen?riztem de semmi. Seg?ts?ged el?re is k?sz?n?m.

VTS_Tibi
3rd October, 2012, 12:58 PM
szia, van egy Piasini eszk?z?m amit?l m?r megbolondulok. Tudn?l nekem seg?teni a be?zemel?s?ben? Ha igen akkor esetleg k?ldj egy el?rhet?s?get -ra ?s megkereslek. ?llandoan hibauzenetet ir ki, pedig telep?tve van a driver, a h?tt?r bez?ld?l ?s engedi kiv?lasztani a megfelel? ecu-t is. Minden k?bel a hely?n t?bbsz?r is leellen?riztem de semmi. Seg?ts?ged el?re is k?sz?n?m.

Replied :) Hope I'll be able to help ;)

Mulatre
1st November, 2012, 02:47 PM
Does anybody have manual for Nissan Juke 1.6 T ?

renut
7th November, 2012, 12:35 AM
how is it possible to read / write a Mazda CX-7 (Denso R2AX SH7059) ???
I have tried to read via OBD, but not possible to read file,
and for J-Tag I have no pinout.
I?m hoping someone can help here.

kennfeld
7th November, 2012, 01:26 AM
how is it possible to read / write a Mazda CX-7 (Denso R2AX SH7059) ???
I have tried to read via OBD, but not possible to read file,
and for J-Tag I have no pinout.
I?m hoping someone can help here.


possible only obd with internet connection

peregrine
7th November, 2012, 03:33 AM
how is it possible to read / write a Mazda CX-7 (Denso R2AX SH7059) ???
I have tried to read via OBD, but not possible to read file,
and for J-Tag I have no pinout.
I?m hoping someone can help here.


Nope J-Tag I have the pin out and a good map let me know if you need it. Map is free by PM only.

tatop
7th November, 2012, 08:21 AM
Nope J-Tag I have the pin out and a good map let me know if you need it. Map is free by PM only.

Please send pinout
Tanks

Inviato dal mio GT-P1000 usando Tapatalk

renut
7th November, 2012, 08:33 AM
Nope J-Tag I have the pin out and a good map let me know if you need it. Map is free by PM only.
Hi peregrine,

please send pin out for CX-7 (Denso R2AX)

renut

renut
8th November, 2012, 08:57 AM
how is it possible to read / write a Mazda CX-7 (Denso R2AX SH7059) ???
Someone has pinout for this ECU?
I?m hoping someone can help here.

kennfeld
8th November, 2012, 10:54 AM
7059 is 2nd gen you can't read it
you need to read obd with a official piasini that can connect to internet server ....

renut
8th November, 2012, 01:12 PM
7059 is 2nd gen you can't read it
you need to read obd with a official piasini that can connect to internet server ....
Hi kennfeld,

so it is impossible to read/write Denso R2AX SH7059 with piasini_clone ?
Impossible via OBD (because needed connection to Piasini server)
and not via j-tag ?

Miketune
9th November, 2012, 05:49 PM
7059 is 2nd gen you can't read it
you need to read obd with a official piasini that can connect to internet server ....

hello friends,
i need help, connection/ ecu pin out
to read/write

2010 Yamaha VF250 outboard motor, Mitsubishi ECU number is F8T60771

thanks evry body ;)

nemena
18th November, 2012, 05:12 PM
Does anyone have pinout for st10f series?

kennfeld
19th November, 2012, 03:22 PM
Hi kennfeld,

so it is impossible to read/write Denso R2AX SH7059 with piasini_clone ?
Impossible via OBD (because needed connection to Piasini server)
and not via j-tag ?

Hello yes it's possible only with official piasini due to server connection...

jtag there are no pads no wire to connect in 7059
version

filoxio
27th November, 2012, 10:26 AM
prejudice someone list of links for motorcycles??

danielboom00
27th November, 2012, 02:31 PM
Hi friend,

I want to read this ecu from renault kangoo 1.5 dci, i saw the diagram for delphi dcm 1.2 but, i can't find the bootstrap pin in this ecu...somebody knows where is it?

Thanks in advance

158802158803

ducatisti
27th November, 2012, 09:24 PM
hello friends,
i need help, connection/ ecu pin out
to read/write

2010 Yamaha VF250 outboard motor, Mitsubishi ECU number is F8T60771

thanks evry body ;)

Most new bike and boat pin outs you will never see from piasini. The collegues of piasini will not even share connections in fear there original device will be cut off.

To figure out the latest boats and bikes we cut open many ecu's. I can connect my piasini to pretty much every bike there is.

Your boat pin out will be easy to work out using the wiring diagram. flash voltage is nearly next to the k line in every application

filoxio77
28th November, 2012, 10:10 AM
Most new bike and boat pin outs you will never see from piasini. The collegues of piasini will not even share connections in fear there original device will be cut off.

To figure out the latest boats and bikes we cut open many ecu's. I can connect my piasini to pretty much every bike there is.

Your boat pin out will be easy to work out using the wiring diagram. flash voltage is nearly next to the k line in every application


so you can find the pdf link Bike control units for example also ducati?

ducatisti
29th November, 2012, 03:46 PM
so you can find the pdf link Bike control units for example also ducati?

All jap bikes no problem .

2012 zx14r , zx10 , ninja 250 , 2012 r1

filoxio
29th November, 2012, 04:01 PM
All jap bikes no problem .

2012 zx14r , zx10 , ninja 250 , 2012 r1

Ok, have PDF???

ducatisti
29th November, 2012, 10:41 PM
Ok, have PDF???

I have the usual bike pdf's that come with piasini clone. Then i have my own pdf for modern bikes that cost us ????s in time cutting open junk ecu's to work out what needs to be connected where. You can find the regular pdf's here for download.

dragger
1st December, 2012, 01:39 PM
Does anyone have connection diagram for Subaru Impreza 2.0 R 160HP 2007 model?

here is the ecu photos.

taras_rx7
1st December, 2012, 04:15 PM
This ecu with Unica Jes processor. Piassini not work.

kennfeld
1st December, 2012, 07:44 PM
update your version to 4.3 or 4.4 the you have all pdf

ducatisti
1st December, 2012, 09:00 PM
update your version to 4.3 or 4.4 the you have all pdf

My collegue has original piasini and still he has not all PDF. He has to prove bike is in shop to get PDF

VTS_Tibi
8th December, 2012, 10:12 AM
Hello,
Here I attach some pics of the Bosch ECU from a Citroen C1.
It actually is a Toyota engine common in Toyota, Citroen, Daihatsu...
It is suppose to be an ME7.9.5 but it has differences as You will see in the pics. Does anyone has the correct connections for reading-writing on this one?

Thanks in advance :)

Did you manage to read/write the ECU with Piasini?

albertros
8th December, 2012, 11:00 AM
Hi,
is anyone having trouble writing to S3000 sagem? I can read but not write even after following write bridge diagram.

Thanks

maxsek
9th December, 2012, 08:01 PM
i write s3000 from renault clio rs work perfect!!!

kennfeld
11th December, 2012, 11:20 AM
My collegue has original piasini and still he has not all PDF. He has to prove bike is in shop to get PDF

i have also original piasini
that what you say is exactly the thing ! we have also to prove that we have the car in workshop it's because some guy share with clone users since that they locked the pdf distribution

ducatisti
11th December, 2012, 10:44 PM
i have also original piasini
that what you say is exactly the thing ! we have also to prove that we have the car in workshop it's because some guy share with clone users since that they locked the pdf distribution

And the same reason i buy a clone. My frind also say support sucks. There was no way i was going to buy original master with poor support and to prove bike in shop before i get pdf. Alientech puts pdf on website. Piasini should too.

I have most original tools. The only clone i buy is from vendors i dislike

Bruce Willis
16th December, 2012, 12:12 AM
Have any one pinout for M32196F by Jtag m32r toolbox

ducatisti
17th December, 2012, 11:15 PM
Have any one pinout for M32196F by Jtag m32r toolbox

I have used tool box with m32r but with tx rx . There is a different connection for j tag yes ?

Bruce Willis
18th December, 2012, 01:06 AM
I don't know, may be i am wrong. Can you give me pinout by which you connect ?

taras_rx7
11th January, 2013, 03:38 PM
hello friends,
i need help, connection pin out
to read/write
Delphi DCM3.7AP SsangYong Korando C ,processor R5F72513BG BGA.

chris_e36_328
19th January, 2013, 11:40 PM
Hi guys, has anyone had any luck with delphi DCM3.5?

Catalin_TCM
26th March, 2013, 05:52 PM
Hello , have anyone conections for DELPHI DCM 3.4 Renault Megane 3 1.5dci ? I dont know how to write because i dont have where to make the bridge like in Delphi_DCM3.4.pdf from piasini


Sorry for my bad english

I have read it - ok , but when i wanted to write the modified file , i didnt have where to do the bridge

daniel guerra
8th April, 2013, 03:33 AM
Does anyone have connections for, MB275800-9541 Opel Corsa 1.7 CDTI 1.7 110HP engine Z17DTJ?

RZR
10th May, 2013, 01:07 PM
I want to flash my 07 civic lx 1.8l and 05 infinity g35 coupe us spec with my piasini master or galletto 2 v53 that i never used. I cant realy afford a wide band kit because college and no job is not helping. I have the instructions on how to hook up the read and write pins on the ecus just need software or tuned files. Cant find winols with plugin for either. What should i do.

antonelllo
22nd May, 2013, 11:43 PM
Hello friends...
I need piasini's screen connections for delphi dcm 3.7 ecu Chevrolet captiva my 2011
please help!!

Cipo
26th June, 2013, 07:00 AM
Hello, I need connection for kawasaki ZX6 2009/2010 Ecu: Denso 21175-02220
Have someone?

amir_82013
5th August, 2013, 09:59 PM
Hello
I need one programmer for Read & Write ECU Sagem S3000
Dose anyone have info of this programmer ? what is price ?
original price ? clone price ?
Dose tested ?
please help me
Thanks.

ceyhan
28th August, 2013, 07:08 PM
hi all

i need renault sagem s2000 pinout

piasini s2000 manual

LaraVAG
5th November, 2013, 10:43 PM
I wonder is there any posibility to connect piassini to EDC16, it have in menu MPC56x, have anyone connection for it?

veloseeped
6th November, 2013, 08:51 AM
I wonder is there any posibility to connect piassini to EDC16, it have in menu MPC56x, have anyone connection for it?

It's original piasini 20-pin connector pinout.

1 - Vbus (0-5V)
2 - TX RS232
3 - CLK
4 - SDO
5 - SRESET
6 - HRESET
7 - SDI
8 - VFL0
9 - VFL1
10 - TMS
11 - AUDSYNC
12 - DATA0
13 - DATA1
14 - DATA2
15 - DATA3
16 - OUTPUT
17 - INPUT
18 - PWR AUX
19 - RX RS232
20 - GND

Attn: I don't check is clone connector equal or not !

Gizbern
8th November, 2013, 05:59 PM
I look for connection for Smart ForFour petrol by Piasini
Somebody can help ?
Thanks!

Martymonaro
9th November, 2013, 10:41 AM
I know of someone with bricked gen2 mps ecu, will no longer respond via obd, does anyone know of any way of recovering?

BALI7605
1st December, 2013, 12:20 PM
Guys i read it is not possible with a clone but is there any other tool or method i can remove the DPF from this unit?
it is a 2.2diesel CX7 i have a clone piasini and galetto1260 /galetto2 mpps xprog etc...


thx

prosec
27th December, 2013, 09:07 PM
this ecu is ddcr

Pixis5
2nd February, 2014, 07:49 PM
Does anyone have Piasini's manual for IAW7GF Marelli?

OVERSPEED
3rd February, 2014, 02:09 PM
Looking for the same 7GF scheme.

Yura123
5th September, 2014, 04:13 PM
Renault - Dacia Delphi DCM3.4 1.5DCI

Need instruction for connect piasini

Please help, any pictures, pinout, wiring diagram would help. Many thanks!

S.W.A.M.I
10th April, 2015, 11:27 PM
does anyone have piasini pinout for 08-10 kawasaki zx10 21175-0240

redewaan
19th February, 2016, 04:46 AM
Hi, I have pinout for all Kawasaki 600 and ZX10

redewaan
19th February, 2016, 04:50 AM
Ducatisti I need pinouts for Honda , and later ZX10,ZX14

Javismart
2nd April, 2016, 01:32 PM
Hello everyone
Bootstrap's alternative pin more comfortable to ECU 451 fortwo
Chinese Piasini recently bought v4.1, correct operation
thanks for sharing

367321367322

Nuz18t
4th April, 2016, 10:30 PM
Hi guys, i need piasini pinouts for opel/denso 3.0cdti
Thank you

csavargo2
8th April, 2016, 06:04 PM
Hello , have anyone conections for DELPHI DCM 3.4 Renault Megane 3 1.5dci ? I dont know how to write because i dont have where to make the bridge like in Delphi_DCM3.4.pdf from piasini


Sorry for my bad english

I have read it - ok , but when i wanted to write the modified file , i didnt have where to do the bridge


Hi,
Could you tell me how were you able to right your file in, what was the connection, please?
I have a same problem.
Thanks and regards

nex97470
17th October, 2016, 06:32 PM
hi guy's
doe's anyone have pinout for magneti marelli iaw 7sm in boot mode?
For RSV4 aprilia's bike
Thanks

gueswhat
4th November, 2016, 11:42 AM
Hi Guys,

Here are all the manuals I have found for the Piasini tool.

There are a few for bikes, loads for cars (170 to be exact), and I've also added my pics of the interface cables.


https://hotfile.com/dl/160883696/d86db02/Connections.zip.html


Feel free to add yours if that is not in the lot!


Press the thanks button if my post was useful! :)

hello i try to download but the site dont respond can you send it to me please?
of maybe a new link please?

weistec
14th February, 2018, 06:00 PM
how to write file to ecu using piasini? to unlock file using slave version

StormBY
3rd September, 2022, 06:34 PM
910634 Kawasaki