PDA

View Full Version : PIASINI NOT WORK ERROR " TIME OUT ECU"



tuning73
25th June, 2012, 11:00 PM
hi all
big help thanks I bought a new piasini tested on many ECU does not work does not read any ECU MCU identifies but does not read error "time out ECU"
erases and writes smoothly Reading not work
help appreciated
thanks

Marmes
25th June, 2012, 11:10 PM
Seems you are not meeting the conditions of booting, the hardware recognizes the ecu, the hardware is ok.
Check your instructions.
Regards

tuning73
25th June, 2012, 11:20 PM
I checked and tested many ECU the same problem read test ecu 59f.m3 m5 m9 me7.3h4 me 7.9.10
all the same error "time out ecu"
followed all the instructions perfectly

put pin "blu" bot read recognized ECU error immediately

Marmes
25th June, 2012, 11:33 PM
instead of using pin blue, put a 1k resistor to ground on bootpin

tuning73
26th June, 2012, 10:56 AM
hi
I tried with resistance to gnd 1k resistor to ground on boot pin the same immediate error reading no idea ?

Marmes
26th June, 2012, 11:40 AM
Ask your dealer to check it or exchange. Maybe a a faulty K line