PDA

View Full Version : Sprinter EZS flash needed A906 545 49 08


workas
26th June, 2012, 08:13 PM
Hi all members,im looking for full flash to this MB ,problem i tahat car was runing until this morning ,just after unlocking with remote car doesent accepts key.I try to connect with das,but cant turn on ignition .Seems that EZS is dead,but central locking still working.If flash is deameged i think that central locking should not work ? Please give me working flash for this MB or test mine.
Thanks in advance.
smayer
26th June, 2012, 09:15 PM
das Can diagnose EZS whitout turn the key.
bugajewski_pl
26th June, 2012, 09:17 PM
Even if you cannot turn on ignition, diagnostic with EZS is still possible. You must only insert key to EZS.
If remote control work i think that coil in key is broken.
workas
26th June, 2012, 09:48 PM
Even if you cannot turn on ignition, diagnostic with EZS is still possible. You must only insert key to EZS.
If remote control work i think that coil in key is broken.


coil i n key is ok ,i can read key with MB Key programmer ,car have 2 keys and both are good.How to test ESL?
smayer
26th June, 2012, 09:55 PM
You can't read the Eprom from MCU?
workas
26th June, 2012, 10:03 PM
You can't read the Eprom from MCU?
Yes i can ,but wth eeprom everything ok
2keys are active
smayer
26th June, 2012, 10:14 PM
do you Try another key? If Yes and dont work heat the MCU with hot air and test.
workas
26th June, 2012, 11:02 PM
do you Try another key? If Yes and dont work heat the MCU with hot air and test.
yes i did that before posting to digital kaos,can you help me with flash file or not ?
kamilpll
27th June, 2012, 10:37 PM
ful flash for x-prog or r270