PDA

View Full Version : Help RPM Limiter



ernesto1670
27th June, 2012, 11:10 AM
Hello mates, I need your help. I explain the issue.
I have a Citroen Xara 1.6 16V, ECU BOSCH 0261206606 and need to turn up the RPM limiter up to 7500 RPM, I edit the map with the ECM2001 and in principle there should be no problem because it is something simple, but a problem arose. The car starts but does not accelerate. Maybe I did something wrong or the driver of the ECM is not entirely correct. I leave the two files the original and modified, if someone can help me with a modification that works well I appreciate it.
Thank you very much.

Sorry for the bad English.

NASTASE
27th June, 2012, 06:06 PM
I think the ECM driver is wrong.The values have been lowered as shown below.I think also the adress is wrong,the rev. limiter is not there.

rasequia
27th June, 2012, 06:47 PM
With wich tool you read / write ecu ?

ernesto1670
27th June, 2012, 07:09 PM
I think the ECM driver is wrong.The values have been lowered as shown below.I think also the adress is wrong,the rev. limiter is not there.

You can help me by modifying the file properly?

NASTASE
27th June, 2012, 09:49 PM
I'm sorry,I tried with ECM Titanium 1.49(wrong driver for rev. limiter)ECM Tit. 1.61 same result.

ernesto1670
28th June, 2012, 08:01 AM
I'm sorry,I tried with ECM Titanium 1.49(wrong driver for rev. limiter)ECM Tit. 1.61 same result.

ok. Thank you very much for trying.
Any partner, can help with a solution?

filecloud
28th June, 2012, 03:54 PM
The problem seems to be the checksum, not the limiter ;-)