help honda odysee

[alex_r_2001]

I do not know what going on. I dump the chip save file then modify the mileage area then write the chip mileage adjusted fine but no rpm no fuel none of the gauges work at all so I write back original dump then mileage reverted back to original but no gauges work also. So I try another cluster same exact problem. I removed both chips and placed them in my reader also I used chip quick to remove the chips so I use as little heat possible. I'm thinking maybe my dumps are corrupt so if anyone has a good dump so I can try n see if it will work it does not matter how many miles on it I'm just trying to work out n see if that will work. 2001 honda odysee 93c56

[afitijuana]

enjoy :manuscarf:

[alex_r_2001]

Ok so I'm still at this just today I reformated my computer installed a fresh copy of Xp professinal sp2 set my port setting to EPP I installed Willem software got everything working I got a new 93c56 I tried to write and read in 8 bit mode that did not work at all then I selected 16 bit mode and was able to write above file but verify didn't clear everything wrote but only the first 4 bytes where off instead of (00 00) I got (FF FF). And this was my original problem has anyone had this problem because I've been losing sleep over this and I've tried just about everything that I've read on the forum my programer is the parrallel willem programmer and I'm assuming my gauges are not working because of the first 4 bytes being incorrect but the trip counter on the display does show the mileage increment. Sorry for the long post but I'm trying to provide as much info as possible thank you guys for any help.

[alex_r_2001]

Thanks for the help I was using a the wrong software for my programmer well not wrong it just had bugs it was no good chips programmed perfect now.