PDA

View Full Version : Megane 1.4 16V Sirius34



mishu_b
29th June, 2012, 10:03 AM
Hello,

I need your support to do Immo Off for the next car:
Renault Megane
1.4, 16V, AC manual, normal key, 2001

I have read a lot about this topic and seams that it could be solution for this Sirius34 as Immo Off without emulator, only sw.

Therefore please let me try your solutions, and I will report if it is working or not!

Attached you can find the 29F400BB full read out of external programmer!

BR

Shmortz
29th June, 2012, 10:48 AM
try this and report, checksum must be calculated before writing

cut inmo line pin 27 before fit ECU

mishu_b
2nd July, 2012, 08:14 PM
...
it does not work!!!

other solution!

leandroks
2nd July, 2012, 10:30 PM
try and report please

mishu_b
4th July, 2012, 09:20 AM
try and report please


what should I do with this file?

it has only 512 bytes and the original file has 512K :(

br

richard27
4th July, 2012, 09:53 AM
ECU - SIEMENS - SIRIUS34 with 29F400 memory immo_off
password is the same

mishu_b
4th July, 2012, 07:58 PM
So feedback!

I have written the Shortz file into the flash.
The Ecu was on the car but the car didn't started with light ON into dash.

Now I have read again - and surprise - the sw is modified? like into attached file.

I do not how should I interpret this!

Shmortz
5th July, 2012, 08:27 AM
..................

cut inmo line pin 27 before fit ECU

did you cut immo line ???

mishu_b
5th July, 2012, 09:20 AM
...
yes - I have cut the wire which connect the pin 27!

for me looks like the immo from uC write back something.

should I lift up the pin WE and connect to VCC for write protection?

br

mishu_b
17th July, 2012, 08:45 PM
...
I have tried also with lifted up the pin WE then I connected this pin to 5V via 220K resistance (current limitation protection) still not working. :(

Any other idea will be more then welcome!

thanks