ford fiesta 2008 SID804

[foufoucne]

HII GUYS
I NEED A ORIGINAL FILES FOR SIEMENS 804 FIESTA DIESEL 1.4TDCI
5WS40438B-T
and tell me how to program his eeprom (it's93c56)
i put the original files for eeprom but now dosn't
work the red light still on
any information please
:giveup::giveup::giveup::giveup::giveup:
i put the eeprom dump and the flash 29f400 dump i wanna to make it immo

[foufoucne]

any idea plz ....help

[foufoucne]

any information how to reprog the eeprom of ecu
1-put a virgin dump and program it ????
2- put the pin in the dump or what any one can help me ??

[foufoucne]

any one help me please

[Meat-Head]

Right, if you go down to the woods today, your be sure of a big surpise.

Because todays the day the teddy bears have teir picnic.

If you notice there a CHUFFING great white baord, that says.

"Welcome to the teddy bears picnic - fiesta you say - possable can fault
on instrument cluster - do self test write here"

Then underneath that it says "Paddington bear woz ere 20 t 12"

[foufoucne]

code defaut
P1601 code de cl? erron? recu de transfert d'allumage PATS
google translate
P1601 key code received wrong ignition transfer PATS
please help

[foufoucne]

:banghead::banghead::banghead::banghead::banghead: :banghead:
i hate this car no one can help me

[luis12]

This code tells you that PATS dont send valid code to ECU. This means that or your key missed valid code or PATS/ reader coil fails. Try with the replace key, disconnect batery for 10sec and try other valid key, if repeats code, remove Pats near key cilinder and clean contacts. report.

[foufoucne]

thank you luis12 fpr replaying
but the problem when i change the eeprom from the original ecu to the new one

[foufoucne]

after 1 month
no one can slove this problem
mmmmmmmmmm

[nasir]

U need to change amd 29f00 ram also with 93c56 remove from old ecu & put to new ecu after that if u still have pats problem reprogramme the key it will be solved.

[foufoucne]

i try it no success
also i put a virgin dump the led still on directly but the starter dont work sooo ... the virgin eeprom wrong
but when i diag it the default P1601 disparated
really i want to know more about this f*** car
to resolve this problem
help me plz

[nasir]

Hi 1601 fault details u have change the ecu b.coz the task of the engine processor & automatic transxle processoris to compare this checksum value with the calculated checksum the processor will observe it & note the obtain data if the checksum does not match so the data will consider the corrupt value ignored in that case processor will use former message. .

[foufoucne]

so i need to change all the kit (dash+ecu+key) or reprogram them with another fiesta(copy/past)

[foufoucne]

any one have a full dump's (ecu = 29f400BB + eeprom 93c56 -- dash 24Cxx -- key dump) for this ford fiesta or virgin kit please help me
:heeeelllllooooo::heeeelllllooooo::heeeelllllooooo ::heeeelllllooooo::heeeelllllooooo:

[medcapot]

this is a vergin file 100% working, try and report
good luck

[i_shot_the_sheriff]

Anyone has the full eproms from this car? Dash+Ecu_flash_+Ecu_Eprom ? I think that if you have these then you can add a key with Tango or Zed-Bull