Speed limiter on 2006 Mercedes Sprinter 2.7 CDI

[zdzich]

I'm trying to eliminate or change the speed limiter in my Sprinter. By factory is set to 83 MPH. What is the best way to do it ? I have purchased a second ECU so, before I do enything I would like to clone my original ECU first. Then I could use the cloned ECU to experiment. What software and programmers could do what I need ? Please help. Thanks.

[rossoelab]

original file?

[zdzich]

I don't have the original file yet. Before I buy a programmer I have to be sure that it will read from my original ECU and be able to program the spare ECU. There is a lot of programmers mostly made in China that don't work. So, my question was which programmer would do this job ?

[mercis]

you can it with dev,mode
search on DK forum

[jurek59]

I am new on this forum. I have soft to the picture of the blockade, I only do not know the principles of placing files on the forum . As you need this PW has. I greet.

[zdzich]

Thanks Jurek. As far as I know there is no problems with placing files on this forum for download. You can also place the link to the location where the file is. Besides the software, some kind of programmer is needed to read and write dump files to the ECU. Because there is so many of them available I don't know which one is good. If you have any experience with reprogramming the ECU is the Sprinter please share let me know. Thank you.

[jurek59]

Unpleasantly I but I did not do this yet. I know, that to remove this the blockade. You have to try and ask farther.
you have linka here.
I ask for forgiveness, my English is weak.


Digital Kaos - Downloads - ECUsafe (http://www.digital-kaos.co.uk/forums/downloads/car-dumps-database/34/ecusafe-2207/)

[zdzich]

No problem Jurek, do you speak Polish ?

[MarkPRP]

ECU safe will not detect speed limiter as its not inside the flash.

If you have someone with STAR Diagnostics then it is a 2 minute job.

[ALEXEI]

use mpps and ecusafe. work 100%. tested

[zdzich]

Thank you guys. Would SMPS MPPS v12 ECU Chip Tuning Tool that is widely available on the internet work in my situation ? Unfortunately, I don't know anyone who has the Star diagnostic system.

[ALEXEI]

Thank you guys. Would SMPS MPPS v12 ECU Chip Tuning Tool that is widely available on the internet work in my situation ? Unfortunately, I don't know anyone who has the Star diagnostic system.

will work any mpps

[zdzich]

thank you, I will try. Do you know in which line of the memory the speed limit is located ? I wonder to what I would have to change the checksum after changing the speed limit number.

[ALEXEI]

do it with ecusafe
mpps v12 will correct the checksum in write

[zdzich]

Thanks again.

[zdzich]

Hi Alexei. Do you have any user guide for mpps v12 ? Or anything how to use this program ?

[ALEXEI]

you dont need. anyway not exist one.
select ecu edc16c31 and read flash. then put dump in ecusafe ad select speed limit off.
save dump and write on ecu.
you can first read ecu id with mpps.
dont tell me that isnt work. Ive done a lot dpf off and speed limits remove on Sprinters.
even today I did one
this folder will help you a lot I hope

[zdzich]

Thank you again Alexei. I've never used this program and never done ECU programming before. So, I already purchased on eBay MPPS v12 interface and program and when it comes I will use the information you provided to clone the ECU and remove the speed limit. Thanks.

[MarkPRP]

2.7 sprinter? 5 Cylinder? in a new shape?

2.7 5cyl 2006 here in the uk was 903.

[ALEXEI]

whos spoken about 2006 2.7 CDI ?
2006 is W906. never heard abt edc15 on it

[zdzich]

well, my thread was about 2006 Mercedes Sprinter with 2.7 L CDI engine. I hope Alexei that what you said will work on my ECU. I have attached the photo of the label on my ECU with all the information about the model number and part. Please let me know that thi could be done like you did today on the other Sprinter. Thanks.

[MarkPRP]

Where in the world are you?

[MarkPRP]

whos spoken about 2006 2.7 CDI ?
2006 is W906. never heard abt edc15 on it

Title is

Speed limiter on 2006 Mercedes Sprinter 2.7 CDI

[looly]

well, my thread was about 2006 Mercedes Sprinter with 2.7 L CDI engine. I hope Alexei that what you said will work on my ECU. I have attached the photo of the label on my ECU with all the information about the model number and part. Please let me know that thi could be done like you did today on the other Sprinter. Thanks.

Ecu is a EDC 16C2-7.42

[ALEXEI]

if its edc15 ecusafe cant remove speed limit. you can read it with mpps only to clone it.
for speed limit you need Star unfortunately

[zdzich]

thank you guys. I will experiment next week on my spare ECU when I get the programmer. And I am in the USA.

[ALEXEI]

Ecu is a EDC 16C2-7.42

I think this one could be EDC15C6

[MarkPRP]

Yes that picture is an EDC16c2/7 or c34

[zdzich]

does it mean I won't be able to do what I needed in the first place ?

[MarkPRP]

SO its a dodge sprinter?

This is where the confusion is by me!

[looly]

Yes that picture is an EDC17c2/7 or c34

EDC17 ????????????

Now im confused lol

[zdzich]

Yes, it is. As far as I know it has the same engine, transmission, and the other parts like Mercedes. The only difference was the emblem and a few cosmetic items. So, it is a Mercedes Sprinter sold in USA by Dodge.

[ALEXEI]

this is CDI3 so obvious edc15C6

[zdzich]

so, what you trying to say I will need the Star diagnostic system ?

[looly]

Take a look here...

Bosch Automotive Aftermarket - Products (http://www.bosch-automotive-catalog.com/public/catalog/products?p_p_id=BoschWSRP&p_p_lifecycle=1&p_p_state=normal&p_p_mode=view&p_p_col_id=column-1&p_p_col_count=1&_BoschWSRP_wsrp-urlType=blockingAction&_BoschWSRP_wsrp-navigationalState=%2FWFS%2FAAGLOBAL-AA-Catalog-Site%2Fen_GB%2F-%2FEUR%2FViewSearchProduct-ByNumberTypesWithOrderNumber%3Bpgid%3DD41D8CD98F00 B204E9800998ECF88omJgZVo%3Bsid%3DtZvv0g-qZb0O_UBYgCFjKAAhFHiHOEXYfVY%3D&_BoschWSRP_proxyportlet-remoteInvocation=true)

Go to product search then type in bosch number 0 281....

[zdzich]

Thank you very much. This is what I found on the website you provided (see attached photo). I do very appreciate your help. This is new to me and every information that I can get to solve my problem is very helpful. Thanks again.

[ALEXEI]

so man, you are saved.
go on with mpps and ecusafe as I said above

[zdzich]

good homework, thanks everyone ! now I know more than this morning.