Fiat Punto 1.2 8V pin code urgent please.

[super jumbe]

Fiat Punto 1.2 8V pin code please

Hi guys,

I want to programme transponder.

Please need security pin code from dash eeprom 93LC66 AND 93LC66x16

Thanks in advance

[abdullah60]

Fiat Punto 1.2 8V pin code please

super jumbe:
your code : 51234

[obdmaster]

Dont forget m8, ID48 transponder is precoded.

Isnt your dump from bcm 93lc66b???

You will need zedbull or tagkeytool to precode or buy key from dealer which comes precoded to your vin.

[vanos batam]

051234 is code

[super jumbe]

Need help please

Got keys on post and tried to programme key with SBB the tool says failed any idea?

I Bought from those (TMC CAR KEYS) complete transponder with ID48 but I do not have any idea if they are pre-coded.

I am getting these error codes 01600 and B1003.

I wonder if any 1 will double check the securities code could be wrong, is it (51234) or (051234)?

Thanks for help and your time

[yellowstilo]

you have to precode the ID48 transponders first using the eeprom file and ZedBull.
During precoding a unique secret code is written in the transponder which will be accepted by the bodycomputer after storing the transponder (and remote) ID codes.

[jacostanzo]

Need help please

Got keys on post and tried to programme key with SBB the tool says failed any idea?

I Bought from those (TMC CAR KEYS) complete transponder with ID48 but I do not have any idea if they are pre-coded.

I am getting these error codes 01600 and B1003.

I wonder if any 1 will double check the securities code could be wrong, is it (51234) or (051234)?

Thanks for help and your time


Pin code is Ok, like they said before, the transponder must be precode with BSI dump,original zed bull do this, or order key from dealer

[richard27]

fiat_93c66 error 93c66x16 okey Kod: 51234
I 48 data for you to try precoding please

[super jumbe]

Ok how do I precode the BSi eeprom file?

Is it posible to buy ID48 precoded chip and programme? http://www.digital-kaos.co.uk/forums/images/smilies/banghead.gif

[richard27]

you me 48 id :0a2bcdf as
I'll do for you, please write data precoding

[yellowstilo]

Ok how do I precode the BSi eeprom file?

Is it posible to buy ID48 precoded chip and programme? :banghead:

No, when you use a blank ID48 transponder you can precode it yourself with Zedbull - the specific secret code of your car is stored in the transponder to match your BSI.
After that you can program the keys (this is the ID of the transponder, not the secret code) and your remote controls if present (you can use Fiat Ecu Scan, Examiner, SBB or similar tool to do this).
When you order a key at your Fiat dealer they will precode the transponder with the same code, you still have to program it to your car after receiving it.

[super jumbe]

Can I use id48 blank chip with this tool?

Will AK48 tool using 93LC66 chip with ID48 after finish the programming, and install BSI back to the car will it start the car?

http://www.autoobd2.co.uk/upload/pro/fiat-key-programmer-2.jpg

[paul_12345]

Can I use id48 blank chip with this tool?

Will AK48 tool using 93LC66 chip with ID48 after finish the programming, and install BSI back to the car will it start the car?



Yes its meant to, I had one but I think it was faulty, far better just to get a clone zed-bull instead anyway.