opel corsa c dash nec

[verica]

hi to all i need to change vin number on this dash or pin number i dont know whot it must be change i have ecu,immi box ,key with transporder all from one other car i try to reprogram dash with op-com without sucsess so i read nec mcu from dash with upa usb here is my dump i need new pin 3706 vin/ W0L0HAF6846016195

[obdmaster]

hi to all i need to change vin number on this dash or pin number i dont know whot it must be change i have ecu,immi box ,key with transporder all from one other car i try to reprogram dash with op-com without sucsess so i read nec mcu from dash with upa usb here is my dump i need new pin 3706 vin/ W0L0HAF6846016195

go into dash using opcom bottom left eeprom menu, read security code.

opcom will read security code by obd.

reset dash and your bcm with this pin code. switch ign off 30 secs.

then program both bcm and dash with your new pin 3706.

opcom lets you change vin also diagnostically.


i told you not to do this in your last post in ecu section.

why dont you listen?? this problem u have is a peace of piss to fix:giveup:

[verica]

i ty do reset by obd with op-com but it says reset fail

[obdmaster]

i ty do reset by obd with op-com but it says reset fail


did you read pin from dash like i described in previous post??

Also fit original immo unit and maybe ecu when trying to reset dash.

Also dont forget your going to need to reset and program body module

[verica]

i will try to read it with old immo box i put new one i will try like that