PDA

View Full Version : 1999 jeep cherokee help



pianoman58
2nd July, 2012, 07:31 PM
We have a 1999 4.0 cherokee cranks but no start. the yellow key in a circle light on the dash comes on for 3 seconds then goes off for 5 seconds then returns and stays on with the ignition. This is model with skim unit on column. Pump/injectors/coil relay is not pulled to ground by ecu. No comms with obd port, I dont have diagram to check it out.
Any help would be great

furnata
2nd July, 2012, 08:07 PM
Check this doc's mate maybe will help you.... Its all about SKIM and Wiring diagram on Cherokee '99

leandroks
2nd July, 2012, 10:32 PM
post the dump and the logical key data and i ll check to u..

pianoman58
16th July, 2012, 08:49 PM
Eventually got to fault, Ecu had failed, Have now sourced used ecu, does anyone know which chip to swap out of old unit, it has no 8 pin eprom and it has 2 identical 28f micros which actually have the word FLASH printed on them.
ECU is motorola with 3 plugs, and pcb's are bonded to inside of outer skin.

Or which programmer can re-program this used Ecu