PDA

View Full Version : AUDI-A3-3.2-QUESTION



pablo1971
2nd July, 2012, 09:22 PM
just wondered if anyone has done(remapped)one of these succesfully..

AUDI A3
2004
3.2 QUATRO

022 906 032 GH
0 261 208 792
378134


I have read the ecu-ME7.1.1- with mpps v12(clone),but when i did the write on it,it went wrong,i got ecu id-security access-the erasing flash-after this i got no write at all,just a error.

cooling fans on and thats it,i tried boot mode,but got no joy,

now ive managed to get the car running on the original file(COURTESY OF ECUTUNERS).


So i just wondered if anyone has done one of these..AND HAD GOOD SUCCESS


(tried mpps on Can---errors everytime after a few %)



Cheers

mislav88
2nd July, 2012, 10:11 PM
which flash is inside, 29F400 or 800? have u tried desoldering flash and reprogramming with programmer?

pablo1971
2nd July, 2012, 10:17 PM
it has the 29f800 in it,and desoldered it and programmed it with original file,so that the car was a runner

pablo1971
2nd July, 2012, 10:27 PM
just sent you a email mislav

wiseman
3rd July, 2012, 10:46 AM
This car uses CAN and k-line, better to use k-line but use galletto 1260 for this ecu

RaraK
3rd July, 2012, 01:22 PM
VR6 me7.1.1 ecu gives issues with mpps most of the time in the USA. Bootmode work or you will use another tool like the galletto or something similar.