PDA

View Full Version : ALHAMBRA 1,9 TDi 85KW can not read with MPPS



Harrycz44
5th July, 2012, 08:45 PM
Hello today I can not read Seat alhambra 1,9 Tdi 85 kW -019J with mpps. Ecu ID OK but read data no. And can not find fuse for dashboard ( I try take out all fuses. )

VRPerformance
5th July, 2012, 08:58 PM
not problem from fuse,i have read same with no problems,the problem is from the tool

Harrycz44
5th July, 2012, 09:04 PM
not problem from fuse,i have read same with no problems,the problem is from the tool

I use mpps and read without problem another cars.. I know that must fuse for dashboard take out.. but I can not locate this

spawns3
5th July, 2012, 09:27 PM
Take out the Ecu and read it on bench .

bondiblu
5th July, 2012, 09:35 PM
I went to read an Ibiza 6L with MPPS and It wouldnt read, it had a parrot hands free kit installed, took me a little while to find this was causing my problem. Maybe a similar problem with aftermarket radio etc. As suggested, best to read on the bench.

ominimicu
5th July, 2012, 10:26 PM
best is to remove it.. you can save a lot of time, sometimes it s not just removing the fuse, it s removing it for 2 secs..and put it back..and keep playing with it. so just do it on bench

waldi1979
5th July, 2012, 10:27 PM
Try Speed options->SLOW

Harrycz44
5th July, 2012, 10:36 PM
Take out the Ecu and read it on bench .

Do you know pinout from ecu pleas?

bondiblu
5th July, 2012, 10:38 PM
Debugger-Instruktion - OBD-Wiki (http://wiki.obdtuning.com/?title=Debugger-Instruktion#EDC_15_5)