Help with gift installation.

[up2nogood]

Hi,

I have a Protek 9700 HD.
I have a gift which i'm not sure how to get it to work.
I have the codes etc to get it to work! but i can't find the right menu to sort it out.
I was told to do this to start with.

Enter into openbox as follows - menu, world icon, mgcamd plug setup, manage config files, newcamd list, press green button to add, enter info below, save and reboot!

well i got to the world icon,(which say installation) but i can't seem to find the rest! maybe there is another way.
Does anyone have any idea plz :)

Cheers.

[mtv1]

ok i'm at logger heads here open box press blue not green

this is breaking the rules also no cs talk

is the protec an open box or are u trying to setup your box ccccam usually in setup

host = ????
port = ?????
uesr = ????
pass = :::

although depending on box ?? openbox or protec ?????????????????//

[up2nogood]

Hi.

I'm new to all this so I'm learning. I'm trying to set it up to get the channels. As for open box, not really sure what that means. As of course I'm still learning. I have port user pass. But surely I shouldn't write it here as someone else might use it no? Like I said I'm new to this and we all got learn:)
If someone with some patients could help I be greatful.

Thanks very much.

[darcu5]

try looking in network setup instead of installation setup(world icon)

menu, NETWORK SETUP, mgcamd plug setup, manage config files, newcamd list, press green button to add, enter info below, save and reboot!

[up2nogood]

try looking in network setup instead of installation setup(world icon)

menu, NETWORK SETUP, mgcamd plug setup, manage config files, newcamd list, press green button to add, enter info below, save and reboot!

All i have in network setting, is

Network enabled
mode DHCP
IP
Subnet mask
Gateway
DNS1
DNS2
MAC

Do i have to install something to get different menu?
As just learning as i go along :)

Cheers.

[darcu5]

Wasnt sure if you had openbox as those are the instructions your trying to follow ot protec.. anyway read below

http://www.digital-kaos.co.uk/forums/f11/protek-packages-57484/

post number 15

[up2nogood]

Wasnt sure if you had openbox as those are the instructions your trying to follow ot protec.. anyway read below

http://www.digital-kaos.co.uk/forums/f11/protek-packages-57484/

post number 15

Hi,

Thanks for that, i'll have a read!
Can you explain what openbox means?

Cheers :)

[slugworth]

Hi,

Thanks for that, i'll have a read!
Can you explain what openbox means?

Cheers :)
if you explain what protek means
this is the openbox receiver section

[lagerland]

https://www.uswatersystems.com/shop/product_images/uploaded_images/open-box.png




http://i.ebayimg.com/00/s/NDAwWDM2MA==/$(KGrHqQOKkYE6jH(SluMBPjEojVlPQ~~60_1.JPG

Its just a receiver mate....................

[up2nogood]

if you explain what protek means
this is the openbox receiver section

Can someone plz tell me what open box mean?

It's the name of the sky box i'm using, protek 9700.

Ok where do i go for some help, us like i said im new to this! lol

Cheers.

[up2nogood]

https://www.uswatersystems.com/shop/product_images/uploaded_images/open-box.png




http://i.ebayimg.com/00/s/NDAwWDM2MA==/$(KGrHqQOKkYE6jH(SluMBPjEojVlPQ~~60_1.JPG

Its just a receiver mate....................

You guys plz im new here! im learning lol
So open box mean it's just a receiver ?

The receiver i have is a protec 9700.
Anyway no worries i'll keep searching

Thanks anyway.

[up2nogood]

Wasnt sure if you had openbox as those are the instructions your trying to follow ot protec.. anyway read below

http://www.digital-kaos.co.uk/forums/f11/protek-packages-57484/

post number 15

Gosh that look so confussin lol
But did't help really..

Anyway guys thanks for trying!

[lagerland]

No one said it was easy m8 just read till your eyers bleed your get there in the end..................

[up2nogood]

No one said it was easy m8 just read till your eyers bleed your get there in the end..................

I got all the channels etc setup..

Just don't have the menus to add the my uk gift.

Just not sure how to get to the right menu to the gift.

I'll keep researching.

Cheers.

[darcu5]

Ok i found a little bit of info. don't know if its any good or if it makes any sense lol

pushing usb and screen+ keys opens the newcamd menue. 16 servers/1 port each are available, hence max 16 3rd party packages can be opened on top of the publicly available ones.

after having obtained server access data from your 3rd-party provider, type in server name = dns of your server (with server ip dns set to on), or numeric server ip in server ip (if dns is set to off).
port, user id and password will have been provided by your provider - type it in the appropriate spaces.
disregard emm, but set protocol to newcamd - and if your provider has cleared you, the leading light indicator will switch from red to yellow/green and you should have pictures now.

the use of the the red, green and yellow keys are self-explanatory, but note: it happens that you'll get freezes or black screen on some packages sometimes - this has got nothing to do with the box but is due to the 3rd party server capacity and/or performance/connectivity. use red key to reset server connection - it does help!

enjoy

[up2nogood]

Ok i found a little bit of info. don't know if its any good or if it makes any sense lol

pushing usb and screen+ keys opens the newcamd menue. 16 servers/1 port each are available, hence max 16 3rd party packages can be opened on top of the publicly available ones.

after having obtained server access data from your 3rd-party provider, type in server name = dns of your server (with server ip dns set to on), or numeric server ip in server ip (if dns is set to off).
port, user id and password will have been provided by your provider - type it in the appropriate spaces.
disregard emm, but set protocol to newcamd - and if your provider has cleared you, the leading light indicator will switch from red to yellow/green and you should have pictures now.

the use of the the red, green and yellow keys are self-explanatory, but note: it happens that you'll get freezes or black screen on some packages sometimes - this has got nothing to do with the box but is due to the 3rd party server capacity and/or performance/connectivity. use red key to reset server connection - it does help!

enjoy

That's all i was looking for thankyou man :)

Right this is what i have in that menu! and what i have wrote that the provider gave me! (but of course i'll leave the details out ;) )

Server name ?????

sever ip DNS on 0.0.0.0

Port ????

User ID ????

Password ????

DES Key 01 01 03 04 05 06 07 08 09 10 11 12 13 14

EMM Disabled

Protocol NewCamd

I reboot (turn box off then back on) but channels are scrambled.

The server 1 has a yellow light, this should be green!

What could be the problem? the internet is pluged in.
It says conneting then not connected.

Thanks alot

Regards

Mark.:)

[darcu5]

Hi really not too sure what the problem is now, but on setup below for internet settings it says newcamd is usually turned off, maybe follow instructions to it and try turning it on see if that does owt, failing that try asking about the problems again under general satellite threads and someone may be able to assist you a bit more, General Satellite TV (http://www.digital-kaos.co.uk/forums/f11/) also found this on the forum http://www.digital-kaos.co.uk/forums/f11/protek-9760hd-short-channel-list-245298/


If you press MENU ***8211; INTERNET and only 4 options are available you need to press EXIT and then press Menu 8888 to activate all the menus. Select INTERNET again there should now be 6 options.

Under MENU - INTERNET set the following:-

NETWORK CONNECTION ON

AUTO UPDATE CHECK ON (T59 or later software only. Each time you turn on your box it will check to see if new software and/or keys are available, if they are read the onscreen information and select UPDATE to update)

Under NETWORK INFORMATION set
DHCP/STATIC to DHCP (If IP address is all zeros set to static then back to DHCP, IP ADDRESS, SUBNET MASK and GATEWAY address should fill in automatically) PVR server IP address is your PC IP address but is only used if your are running the record to PC Hard disk software.

NEWCAMD is normally set to OFF.

Under PROXY CONNECTION set PROXY CONNECTION to OFF.

S/W UPGRADE, go to S/W UPGRADE section to make this setting and use this feature.

When watching a channel press the MENU button to confirm BT, SW, and K.

Whilst on a channel press OK, then BLUE button, for further information.

[up2nogood]

Hi really not too sure what the problem is now, but on setup below for internet settings it says newcamd is usually turned off, maybe follow instructions to it and try turning it on see if that does owt, failing that try asking about the problems again under general satellite threads and someone may be able to assist you a bit more, General Satellite TV (http://www.digital-kaos.co.uk/forums/f11/) also found this on the forum http://www.digital-kaos.co.uk/forums/f11/protek-9760hd-short-channel-list-245298/


If you press MENU ***8211; INTERNET and only 4 options are available you need to press EXIT and then press Menu 8888 to activate all the menus. Select INTERNET again there should now be 6 options.

Under MENU - INTERNET set the following:-

NETWORK CONNECTION ON

AUTO UPDATE CHECK ON (T59 or later software only. Each time you turn on your box it will check to see if new software and/or keys are available, if they are read the onscreen information and select UPDATE to update)

Under NETWORK INFORMATION set
DHCP/STATIC to DHCP (If IP address is all zeros set to static then back to DHCP, IP ADDRESS, SUBNET MASK and GATEWAY address should fill in automatically) PVR server IP address is your PC IP address but is only used if your are running the record to PC Hard disk software.

NEWCAMD is normally set to OFF.

Under PROXY CONNECTION set PROXY CONNECTION to OFF.

S/W UPGRADE, go to S/W UPGRADE section to make this setting and use this feature.

When watching a channel press the MENU button to confirm BT, SW, and K.

Whilst on a channel press OK, then BLUE button, for further information.

I don't have * on my remote so i can't add the it to activate the extra menu.

Cheers.

[darcu5]

If you press MENU - INTERNET and only 4 options are available you need to press EXIT and then press Menu 8888 to activate all the menus . Select INTERNET there should now be 6 options.

i dont know where the stars and numbers came from lol