Problem in das and xentry 1-2012

[MAGHRIBI81]

when i want to lunch DAS i get this error:

ImageShack® - Online Photo and Video Hosting (http://imageshack.us/photo/my-images/215/43200931.png/)

when i want to launch DAS Simulation i get this error:

ImageShack® - Online Photo and Video Hosting (http://imageshack.us/photo/my-images/109/65017568.png/)

and xentry didn't install becuse i get this error :

ImageShack® - Online Photo and Video Hosting (http://imageshack.us/photo/my-images/684/90446886.png/)

help pls :confused:

[DB_member]

For some reason I have difficulties reading the attached photos (cannot zoom them to be readable). You could at least enter Compact2 reg key and reinstall Xentry. Then you should be able to start DAS too.

If you wish, you can swap the DAS32R2.exe file with a modified one to be able to start DAS directly.

Perhaps you do not have the correct thesaur file for DAS, which language are you using (and did you check the thesaour folder)?

[MAGHRIBI81]

hello my friend thank you for the help the problem is solved I install Xentry very well

[alexG]

Hi, i have same problem how did you do it/ my run 05.2012 DAS & Xentry
How can i find xentry exe icon ,it say
" Start DAS via Xentry"
Any halp pleas :confused:
Thans:ridinghorse:

[pesona]

Maybe you have not install the xentry yet.

You have to run the setup.exe file from stardiag\xentry_frame of the 05_2012 das iso.

There are some steps that you have to do after finished das install.

After the das install information appear, don't restart.
1. run compact2 Reg File
2. run stardiag\xentry_frame\setup.exe until finish
3. ren compact2 to compact4 again in registry
4. restart
5. run post install
6. run some fixes if needed

if you want to run das standalone, download the "crack" das32r2.exe from forum and replace the original. don't forget to backup.

[alexG]

i can not install agen das not aloud to do .Onle nassage 'do you wont uninstall or repair it ' when i click nothing heppen go all around:thrasher:

[alexG]

Hi
I instaled soft ,but dont see xentry in my programm.
Trying instsll just xentry becas look like did not install it and when i start i see massege ,can not install xentry look photo
Pleas halp

[DB_member]

Hi
I instaled soft ,but dont see xentry in my programm.
Trying instsll just xentry becas look like did not install it and when i start i see massege ,can not install xentry look photo
Pleas halp

Are you sure you did what pesona explains just above?

[alexG]

Hi .
Look like i did it just remuve compact2 and all go OK
Thanks all for halp :celticparty: