View Full Version : Audi S4 Simos 6.2 ECU Flash Thru OBD or BDM
nynhp
9th July, 2012, 03:43 AM
tried reading out the car thru obd but it wont communicate. would BDM be the next step in doing so?
car is a 2011 Audi S4 Simos 6.2 ECU 3.0TFSI
Im using galletto2
leandroks
9th July, 2012, 11:00 PM
Open the ecu and read it from ic.
gezame
10th July, 2012, 02:41 AM
Hi
Cmd can be done in OBD from 3 May 2010.
Br.
nynhp
10th July, 2012, 08:29 AM
im using galletto 2 im trying to do a 2011 Audi A7 same engine and same ecu as the 2011 Audi S4
filecloud
10th July, 2012, 08:41 AM
This is not a Simos 6!
Audi S4 TFSI compressor is Simos 8.x
greetings,
filecloud
nynhp
11th July, 2012, 06:51 AM
galletto 2 on the sheet it say
S4 3.0l TFSI Siemens Simos 6.2 R/W Yes Flasher
filecloud
11th July, 2012, 07:26 AM
galletto 2 on the sheet it say
S4 3.0l TFSI Siemens Simos 6.2 R/W Yes Flasher
:-)
Galetto sheet == shit!
Look in the car and see yourself.
greetings,
filecloud
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.