View Full Version : warning fgtech clone
mysamed
11th July, 2012, 12:28 PM
Hello Chinea fgtech clone not work very bad interface
materials are completely erroneous
erroneous mounting
BDM is not working
is not working trucks tractors
EDC16 edc15 works just fine
Do not connect 24v
12v only
attention
willobd
12th July, 2012, 04:50 AM
Hello Chinea fgtech clone not work very bad interface
materials are completely erroneous
erroneous mounting
BDM is not working
is not working trucks tractors
EDC16 edc15 works just fine
Do not connect 24v
12v only
attention
yes, only the BDM function has problems.
others a good
sunduk112
13th July, 2012, 04:54 AM
China is a clone of watch and think!
Picture number 3, if I podklyuchilby Galletto and connect to the ECU, I think that my Galletto dead or ECU!
12V wire just goes to the cable shield.
http://s019.radikal.ru/i616/1207/4c/5f91001049b8.jpg (http://www.radikal.ru)
http://i074.radikal.ru/1207/c8/cb7128d8b728t.jpg (http://radikal.ru/F/i074.radikal.ru/1207/c8/cb7128d8b728.jpg.html)
http://s019.radikal.ru/i625/1207/ae/9a4cf247ad81.jpg (http://www.radikal.ru)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.