PDA

View Full Version : peugeot 206 off


jjrp255630
11th July, 2012, 05:46 PM
hi, i need this dump with immo off

regards
Holtek
11th July, 2012, 07:01 PM
Try this file:
jjrp255630
11th July, 2012, 07:12 PM
Try this file:

thanks, but doesnt work .
electrones
11th July, 2012, 07:31 PM
Hi friend
try this not tested good luck
electrones
11th July, 2012, 08:53 PM
Hi friend
try this not tested good luck
try this, virgin by ico?s immo cleaner good luck
jjrp255630
12th July, 2012, 06:03 PM
try this, virgin by ico?s immo cleaner good luck


hi, i try many dumps, also program virgen, but car only acelerate to 3000rpm

regards
obdmaster
12th July, 2012, 06:15 PM
hi, i try many dumps, also program virgen, but car only acelerate to 3000rpm

regards

Even when you drive vehicle down the road m8??? with wheel speed signal??
cfgebel
12th July, 2012, 06:15 PM
do t?l?codage with pp2000

your pin code JNDG

rewrite code inector

F9DF8050
FE5EFE90
041FE140
08AF80D0
jjrp255630
12th July, 2012, 06:27 PM
do t?l?codage with pp2000

your pin code JNDG

rewrite code inector

F9DF8050
FE5EFE90
041FE140
08AF80D0

hi friend, this ecu its not original from car, i get pin from BSI and i reprogram it, only i have error on program injector, the 3000RPM max is because of injector code?

regards



ps: i think that eeprom dump its not for this ecu too
cfgebel
12th July, 2012, 07:05 PM
do this and you see
elmaro
13th July, 2012, 08:18 AM
Do you have calculated a checksum of the new login ?
jjrp255630
13th July, 2012, 09:31 AM
Do you have calculated a checksum of the new login ?

i put the login with PP2000
elmaro
13th July, 2012, 10:06 AM
See here: http://www.digital-kaos.co.uk/forums/f175/psa-ecu-bosch-16c34-16c39-login-checksum-95489
jjrp255630
13th July, 2012, 12:26 PM
See here: http://www.digital-kaos.co.uk/forums/f175/psa-ecu-bosch-16c34-16c39-login-checksum-95489


but this is for edc16c34 and c39, this that i have is edc16c3

regards
elmaro
13th July, 2012, 12:51 PM
Memory cells $60-$67 $80-$87 $A0-$A7 are stored in the same way. Try it can will work
jjrp255630
16th August, 2012, 06:12 PM
hi friends, i get other ecu, i make immo off, car start but no more then 3000rpm

i upload boths dumps

i need 100% immo off because car have transponder problems,i try new tranponder but give error.


regards
gyapi11
16th August, 2012, 10:20 PM
hi friends, i get other ecu, i make immo off, car start but no more then 3000rpm

i upload boths dumps

i need 100% immo off because car have transponder problems,i try new tranponder but give error.


regards

Hi.trying to encode injectors
jjrp255630
18th August, 2012, 09:23 AM
hi, its posible change pin in ecu? without changing all data?

regards