vectra b 2.2 dti rmapping advice

[radb02]

Hi all, i already have Winols, ive done a few remaps using MPPS version 12. My car is a 2002 Vectra B 2.2 dti and i am looking into remapping that. I cant find a tool that will read the ecu but my mpps will write to the ecu. Im wondering if anyone has an original file for it so it can be tuned in winols, or even better a tuned file.

Thanks in advance

:wavey:

[ominimicu]

post sw hw number
ecu should be edc15M write only, i ve done several via magpro. you should be able to get sw number and opel specific number

[radb02]

HW 0281 010 271
SW numbers arent clear, ive tried reading id with my mpps but doesnt bring any up, then also with kwp but all it brings up is the hw number above.

The letters on the ecu are PG if that helps.

Thanks.

[wiseman]

EDC 15M1-7.8

[ominimicu]

here , this should do it. but i always wrote these ecus with magpro

[radb02]

Thanks a lot, really appreciate the help.

[mario38]

how to write this file in your machine?

[radb02]

Hi, i have mpps v12 and a clone kwp plus. The mpps wont read or write on the 2.2 dti but my kwp loaded the map with no problems.

My car is now remapped and really happy with it. I did have a remapped ecu fitted but the file was shocking! I wrote over it with the above standard file then had the file tuned.

[columbo25]

Hi,

you have the 2.2dti engine with the old EDC15M ecu with PSG5 Pump. Must be the same i saw in Frontera 2.2dti but the engine code was y22dth and in your case y22dtr.
This you can program easily with kwp 2000 or Galetto like i did. MPPS wasn?t also not working for me, but Galetto is quite good.
This ecu is not readable with any obd tools so you have to desolder eproms if you want to read it.

Here are some informations about your car:

Motorspezifische Kenndaten, Y 22 DTR, Y 22 DTH
Motorbezeichnung, Y 22 DTR, Y 22 DTH
Hubraum, 2171 cm 3, 2171 cm 3
Bohrungsdurchmesser, 84 mm, 84 mm
Hub, 98 mm, 98 mm
Leistung bei Drehzahl, 92 kW/4000 min -1, 88 kW/4000 min -1
Drehmoment bei Drehzahl, 270 Nm/1500-2750 min -1, 280 Nm/1600-2500 min -1
Verdichtungsverh?ltnis, 18,5 : 1, 18,5 : 1
Einspritzpumpe, VP 44 PSG 5 PI S 3.5, VP 44 PSG 5 PI S 3.5

BR
columbo25

[cosworth89]

Hi there, is this the unmodified ori read? Many thanks