PDA

View Full Version : Hyundai DPF Remove



dgmcan
17th July, 2012, 10:16 PM
Hi!

I need some help.

I've removed dpf from hyundai sonata 2.0 CRDI '08
But now The car has power problem, there are less power, may be in protec mode.
not check engine light on
not dtc.
not regeneration.
not postinyection.

only less power

ross79ta
17th July, 2012, 10:32 PM
put the torque limiter (from 1CDC60 to 1CDC90) at 6000. Then you put off other post injection map.
After you put in the corrected file, with a diagnosys tool, look for "dpf replace" function and do it.

popescovici11
17th July, 2012, 11:09 PM
what software you use for making DPF OFF?
I think that you use EcuSafe because on most case this stupid software erase DTC table and even you will remove engine you will not get any DTC error on dashboard !

dgmcan
18th July, 2012, 08:21 AM
put the torque limiter (from 1CDC60 to 1CDC90) at 6000. Then you put off other post injection map.
After you put in the corrected file, with a diagnosys tool, look for "dpf replace" function and do it.

What other post-injection map?

ross79ta
24th July, 2012, 08:48 PM
dtc's switches off, modified torque limiter, switch off dpf, and other funny things :)

dgmcan
25th July, 2012, 09:06 PM
The car now is running well, there aren't any smoke and it has all power.

Sometimes there are a little momentary down in power.

ross79ta
26th July, 2012, 02:13 AM
you can do a small remap to earn the necessary power.

Thank you for report ;)