PDA

View Full Version : 2.0 TDI CR VAG turbo actuator setup procedure



chris_e36_328
19th July, 2012, 12:01 AM
Hi, does anyone have any info on setting up the turbo actuator on the 2.0 CR TDI? We have done one recently, but we're getting a lot of smoke and knocking under hard acceleration from say 1200rpm. Low throttle at low revs or hard at 2000 and higher feels all good. Just wondering whether there is anything tricky in the procedure or whether it is more of an EGR issue. thanks

chris_e36_328
24th July, 2012, 02:16 AM
looks like there isn't much info out there about it :-(

hidde
12th April, 2017, 07:52 AM
Hi, does anyone have any info on setting up the turbo actuator on the 2.0 CR TDI? We have done one recently, but we're getting a lot of smoke and knocking under hard acceleration from say 1200rpm. Low throttle at low revs or hard at 2000 and higher feels all good. Just wondering whether there is anything tricky in the procedure or whether it is more of an EGR issue. thanks

Did you solve this problem, i have the same here?

dzevad
19th April, 2017, 12:29 AM
Friend authorized services have tool for adjusting the turbo actuator. allegedly without this tool can not be set new turbo actuator

incc
22nd August, 2017, 08:39 PM
Here PDF manual