PDA

View Full Version : retriction disable in edc16cp34



mobileworks
19th July, 2012, 07:48 PM
i have mounted in other car ,without electronics , one motor audi v6 tdi 3.0l denom: asb
the problem is retricted without other devices orig; abs airbag ,dash an gear electronic instaled
,car run but with lees power ,do any body have ,how make desactive rectriction and make more power
(rpm limited to 2500rpm..
thanks in advance juan

pablo1971
19th July, 2012, 11:32 PM
you need to do a diagnostics to find fault code why engine is running in limp mode......start from there

jnoroeste
7th August, 2012, 12:32 PM
Hi M8,

You need to conect/close, clutch pedal swich wires!

Regards.

mobileworks
7th August, 2012, 01:47 PM
yes , i try, but the problem, is faulty in signal from abs ( velocity signal not present) i need or simulate via can or disactive in map... thanksss for your interest in my problem..

jnoroeste
7th August, 2012, 04:45 PM
Hi M8,
I?m not sure if you need speed signal from ABS, but surely you may need to close CAN wires with an 120 Ohm resistance (end of line).

If not, the solutions are recode or reflash ecu.
Regards.