PDA

View Full Version : ME7.9.6 Checksum


Pixis5
22nd July, 2012, 11:49 PM
Hi!
I had a ME7.9.6 (29F800BB inside) to make some tests (Astra G 2.4 16v). No matter what checksum correction software I try, the car won't start (blinking CEL and INMO light on the dash when ignition goes on). Putting the ori back makes the car run perfect. ECU is read/write in bootmode.
Please find attached the ori and mod.
Can somebody help me find a solution for this? the mod has really simple and small changes but won't work.
Regards.
carmageddon
23rd July, 2012, 07:17 AM
checksum is ok!

but the file is all wrong!!!!
Pixis5
23rd July, 2012, 12:58 PM
checksum is ok!

but the file is all wrong!!!!

Don't mind the changes... it's not the real tuned file but a proof of concept. The problem is that the car does not start on it and it should.
OVERSPEED
23rd July, 2012, 11:18 PM
ECM says it is Ok... but who really relly on it 100% heheheh
Pixis5
23rd July, 2012, 11:29 PM
Winols as well...

Sent from my XT860 using Tapatalk 2
Pixis5
25th July, 2012, 01:50 AM
No one? Any clues?
OVERSPEED
25th July, 2012, 01:59 AM
Did You try to make one little mod to see if it happens again ?

Are you using magpro ?
Pixis5
25th July, 2012, 02:02 AM
Did You try to make one little mod to see if it happens again ?

Are you using magpro ?

I'll try one small change next time I get the car here... I also suspect that something might be outside the checksum control area.
Yes, I'm using genuine magpro2, but it's the same as any other tool because I'm using the C167 bootmode.
Regards.
OVERSPEED
25th July, 2012, 01:48 PM
I'll try one small change next time I get the car here... I also suspect that something might be outside the checksum control area.
Yes, I'm using genuine magpro2, but it's the same as any other tool because I'm using the C167 bootmode.
Regards.

I noticed one thing, ME7.9.6 in Brazil came with 29F400BB, perhaps the CKS error has something to do with with.
Pixis5
25th July, 2012, 04:05 PM
I noticed one thing, ME7.9.6 in Brazil came with 29F400BB, perhaps the CKS error has something to do with with.

Might be... this is the first one I hear with 29F800BB.
OVERSPEED
25th July, 2012, 04:59 PM
(nothing to do with the topic) these are only gasoline rigth ?
Pixis5
25th July, 2012, 05:03 PM
(nothing to do with the topic) these are only gasoline rigth ?


Yes they are!