PDA

View Full Version : CHEROKEE 3.1TD 0281010140



CIRCUIT.FR
24th July, 2012, 08:53 AM
HI

I need immo off CHEROKEE 3.1TD ecu BOSCH 0281010140.
Here 24C02 dump:

Could made it?

Thanks

popescovici11
24th July, 2012, 09:01 AM
done.
good luck.

CIRCUIT.FR
24th July, 2012, 09:17 AM
Thanks

I don't have car. I need to go at 150km.
Sure work?

I need WP, cut immo line?

Thanks

CIRCUIT.FR
9th August, 2012, 09:00 AM
done.
good luck.

HI

I test your file for cherokee.
http://www.digital-kaos.co.uk/forums...0140-a-282760/ (http://www.digital-kaos.co.uk/forums/f178/cherokee-3-1td-0281010140-a-282760/)
First time, Car start and work well, but second car start and stop after 2 second.
I think immo is enable again.
I need WP?

Thanks

koncimobil
9th August, 2012, 09:09 AM
To protect read/write operations short pin7 & pin8 24c02.
pin7 wp.
pin8 vcc.

furnata
10th August, 2012, 05:13 AM
HI

I test your file for cherokee.
http://www.digital-kaos.co.uk/forums...0140-a-282760/ (http://www.digital-kaos.co.uk/forums/f178/cherokee-3-1td-0281010140-a-282760/)
First time, Car start and work well, but second car start and stop after 2 second.
I think immo is enable again.
I need WP?

Thanks

You'll need to WP for sure also change 24c02 with new one

augustinbz
10th August, 2012, 12:44 PM
did you solve the problem?

tuberider
20th February, 2013, 10:33 AM
Hi Circuit , did you find a solution for the Jeep?
Thank`s

CIRCUIT.FR
21st February, 2013, 12:22 PM
Hi Circuit , did you find a solution for the Jeep?
Thank`s

Hi

Here modif file.
Need new eeprom and WP.

auto diag
21st February, 2013, 01:03 PM
Hi Circuit , did you find a solution for the Jeep?
Thank`s

the solution below working well on jeep

Nierka19
12th April, 2014, 10:42 PM
CIRCUIT.FR (http://www.digital-kaos.co.uk/forums/members/191227-circuit-fr/) can you send me pass?thanks

augustinbz
12th April, 2014, 11:04 PM
you can try ecuvonix 3.2 solution, new eeprom with wp active.

Nierka19
12th April, 2014, 11:53 PM
what means wp active? can you explain?

Shmortz
13th April, 2014, 01:09 PM
wp = write protect, in this mode ECU can't change eeprom contents and immo will be allways inactive, BUT ECU will not be able to store DTC's, that may be big problem in future...

Nierka19
13th April, 2014, 01:45 PM
so what I have to do with wp? Just buy new 24c02 write dump with immo off and finish? need to cut immo line or make short eeprom pin 7 and 8?

gccb
13th April, 2014, 01:51 PM
U have to buy new eeprom and short 7 to 8. U can start without eeprom tested many times but Will got immo flashing.

nicamarcos
14th April, 2014, 12:02 PM
With WP enabled forget in future got dtc codes from this ecu :)

Nierka19
16th April, 2014, 06:01 PM
Any solution without WP enable?

Nierka19
16th April, 2014, 06:13 PM
Posible make immo off without WP enable???

rrr86
3rd December, 2018, 03:09 AM
hello, could You send me this file?